Re: run(4) fails to scan

[Robert Swindells <rjs%fdy2.co.uk@localhost>]

Martin Husemann <martin%duskware.de@localhost> wrote:
>On Mon, Jul 15, 2019 at 07:25:45PM +0200, Manuel Bouyer wrote:
>> Hello,
>> I'm trying to use this wifi USB adapter:
>> run0 at uhub7 port 1
>> run0: Ralink (0x148f) 802.11 n WLAN (0x5370), rev 2.00/1.01, addr 3
>> run0: MAC/BBP RT5390 (rev 0x0502), RF RT5592 (MIMO 1T1R), address e8:4e:e8:4e:af:44
>> run0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>> run0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>> run0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>> 
>> (tested on 8.1 and HEAD).
>> wpa_supplicant doesn't find any AP (it finds dozens with the internal
>> wpi(4)) and wiconfig fails with:
>> rochebonne# wiconfig run0 -D
>> scanning .............wiconfig: ioctl: Operation now in progress
>> 
>> (the same command with wpi0 finds 12).
>> 
>> Is anyone using such an adapter with NetBSD ?
>
>I have:
>
>run0 at uhub4 port 2
>run0: Ralink (0x148f) 802.11 n WLAN (0x5370), rev 2.00/1.01, addr 5
>run0: MAC/BBP RT5390 (rev 0x0502), RF RT5592 (MIMO 1T1R), address 3c:33:3c:33:70:96
>run0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>run0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>run0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>
>and it fails to scan as well.
>
>OpenBSD works fine, and there are quite a few differences for this variant
>in the driver.

Maybe try the patch here:

<https://mail-index.netbsd.org/tech-net/2017/01/19/msg006248.html>

I had a patch based on a newer version of the OpenBSD driver in 2015 but
that got broken by a commit of code from FreeBSD.