Current-Users archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: ZFS disaster on -current
Yes, I do. Should I be looking for something specific?
I've uploaded it here, if it is of interest -
https://send.firefox.com/download/74761aa43c6c54b3/#PbaGxtDN81Hzk2VUjefozw
.
BTW I repeated the test on a pvh guest of XCP-NG, it panics the same way.
Chavdar
On Wed, 24 Jun 2020 at 12:07, Jaromír Doleček <jaromir.dolecek%gmail.com@localhost> wrote:
>
> By chance, do you have the kernel crash dump from the original panic
> which happened yesterday? The subsequent ones might be a result of the
> first one.
>
> The messages about redzone don't mean anything beyond that there is no
> overflow protection for items on the pool.
>
> Jaromir
>
> Le mer. 24 juin 2020 à 11:34, Chavdar Ivanov <ci4ic4%gmail.com@localhost> a écrit :
> >
> > Hi,
> >
> > On
> >
> > NetBSD ymir 9.99.68 NetBSD 9.99.68 (GENERIC) #1: Tue Jun 23 22:53:46
> > BST 2020 sysbuild@ymir:/home/sysbuild/amd64/obj/home/sysbuild/src/sys/arch/amd64/compile/GENERIC
> > amd64
> >
> > I suddenly got a panic with ZFS; it took place with the previous
> > kernel, so it was something with the module. In single user I disabled
> > zfs in /etc/rc.conf and was able to complete boot, but obviously
> > without my two pools.
> >
> > 'modload solaris' didn't show any problem.
> >
> > I set aside the contents of /etc/zfs and did 'modload zfs', which resulted in:
> >
> > .....
> >
> > WARNING: ZFS on NetBSD is under development
> > pool redzone disabled for 'zio_buf_4096'
> > pool redzone disabled for 'zio_data_buf_4096'
> > pool redzone disabled for 'zio_buf_8192'
> > pool redzone disabled for 'zio_data_buf_8192'
> > pool redzone disabled for 'zio_buf_16384'
> > pool redzone disabled for 'zio_data_buf_16384'
> > pool redzone disabled for 'zio_buf_32768'
> > pool redzone disabled for 'zio_data_buf_32768'
> > pool redzone disabled for 'zio_buf_65536'
> > pool redzone disabled for 'zio_data_buf_65536'
> > pool redzone disabled for 'zio_buf_131072'
> > pool redzone disabled for 'zio_data_buf_131072'
> > pool redzone disabled for 'zio_buf_262144'
> > pool redzone disabled for 'zio_data_buf_262144'
> > pool redzone disabled for 'zio_buf_524288'
> > pool redzone disabled for 'zio_data_buf_524288'
> > pool redzone disabled for 'zio_buf_1048576'
> > pool redzone disabled for 'zio_data_buf_1048576'
> > pool redzone disabled for 'zio_buf_2097152'
> > pool redzone disabled for 'zio_data_buf_2097152'
> > pool redzone disabled for 'zio_buf_4194304'
> > pool redzone disabled for 'zio_data_buf_4194304'
> > pool redzone disabled for 'zio_buf_8388608'
> > pool redzone disabled for 'zio_data_buf_8388608'
> > pool redzone disabled for 'zio_buf_16777216'
> > pool redzone disabled for 'zio_data_buf_16777216'
> >
> > I have no idea what that means, it is a first for me, ZFS otherwise
> > has been very reliable on this hardware so far, inasmuch as I have the
> > mercurial repo on a zfs and build from it from time to time (the panic
> > is from the last cvs update from yesterday, though).
> >
> > Subsequent 'zpool import' repeated the panic (without getting me into
> > the debugger, though):
> >
> >
> > ZFS filesystem version: 5
> > uvm_fault(0xffffa97e4c3e1610, 0x0, 1) -> e
> > fatal page fault in supervisor mode
> > trap type 6 code 0 rip 0xffffffff81d49882 cs 0x8 rflags 0x10286 cr2
> > 0xa0 ilevel 0 rsp 0xffffde819c16d760
> > curlwp 0xffffa97e3a41e140 pid 17394.17394 lowest kstack 0xffffde819c16a2c0
> > panic: trap
> > cpu0: Begin traceback...
> > vpanic() at netbsd:vpanic+0x152
> > snprintf() at netbsd:snprintf
> > startlwp() at netbsd:startlwp
> > alltraps() at netbsd:alltraps+0xc3
> > vdev_open() at zfs:vdev_open+0x9e
> > vdev_open_children() at zfs:vdev_open_children+0x39
> > vdev_root_open() at zfs:vdev_root_open+0x33
> > vdev_open() at zfs:vdev_open+0x9e
> > spa_load() at zfs:spa_load+0x38e
> > spa_tryimport() at zfs:spa_tryimport+0x86
> > zfs_ioc_pool_tryimport() at zfs:zfs_ioc_pool_tryimport+0x41
> > zfsdev_ioctl() at zfs:zfsdev_ioctl+0x8c1
> > nb_zfsdev_ioctl() at zfs:nb_zfsdev_ioctl+0x38
> > VOP_IOCTL() at netbsd:VOP_IOCTL+0x44
> > vn_ioctl() at netbsd:vn_ioctl+0xa5
> > sys_ioctl() at netbsd:sys_ioctl+0x550
> > syscall() at netbsd:syscall+0x26e
> > --- syscall (number 54) ---
> > netbsd:syscall+0x26e:
> > cpu0: End traceback...
> >
> > The above panic did not leave a crash dump.
> >
> > When I had /etc/zfs populated before, I also got a crash dump (with
> > 'reboot 0x104'), as follows:
> >
> > # crash -M netbsd.18.core -N netbsd.18
> > Crash version 9.99.68, image version 9.99.68.
> > crash: _kvm_kvatop(0)
> > Kernel compiled without options LOCKDEBUG.
> > System panicked: reboot forced via kernel debugger
> > Backtrace from time of crash is available.
> > crash> bt
> > _KERNEL_OPT_NARCNET() at 0
> > _KERNEL_OPT_NARCNET() at 0
> > sys_reboot() at sys_reboot
> > db_fncall() at db_fncall
> > db_command() at db_command+0x127
> > db_command_loop() at db_command_loop+0xa6
> > db_trap() at db_trap+0xe6
> > kdb_trap() at kdb_trap+0xe1
> > trap() at trap+0x2b7
> > --- trap (number 6) ---
> > vdev_disk_open.part.4() at vdev_disk_open.part.4+0x49a
> > vdev_open() at vdev_open+0x9e
> > vdev_open_children() at vdev_open_children+0x39
> > vdev_root_open() at vdev_root_open+0x33
> > vdev_open() at vdev_open+0x9e
> > spa_load() at spa_load+0x38e
> > spa_load_best() at spa_load_best+0x58
> > spa_open_common() at spa_open_common+0xc2
> > pool_status_check.part.25() at pool_status_check.part.25+0x1e
> > zfsdev_ioctl() at zfsdev_ioctl+0x80e
> > nb_zfsdev_ioctl() at nb_zfsdev_ioctl+0x38
> > VOP_IOCTL() at VOP_IOCTL+0x44
> > vn_ioctl() at vn_ioctl+0xa5
> > sys_ioctl() at sys_ioctl+0x550
> > syscall() at syscall+0x26e
> > --- syscall (number 54) ---
> > syscall+0x26e:
> > .....
> >
> > Any idea what is going on? I've restarted a build, but the cvs log
> > doesn't show anything relevant as far as I can see.
> >
> >
> > Chavdar
> >
> >
> >
> > --
> > ----
--
----
Home |
Main Index |
Thread Index |
Old Index