I recently sent the enclosed message to you, indicating there might be a
bug.  In actuality, I'm wrong.  It was indeed operater error on my part.
 I have a SCSI disk and DAT drive installed in the machine.  The NetBSD
install was trying to write to the DAT drive.  I unplugged the DAT drive
to see what would happen ... everything is cool.

So, sorry for the previous email!




/abp

--
Adam B. Plummer
Metamor Technologies, Ltd.
One North Franklin St. (Suite 1500)
Chicago, IL  60606
WWW:	http://www.metamor.com/
E-Mail:	adam.plummer@metamor.com
Phone:	(312) 251-2455
Fax:	(312) 251-2999
Pager:	(312) 910-0395 or adam.plummer@pager.metamor.com


>-----Original Message-----
>From:	Plummer, Adam 
>Sent:	Friday, January 31, 1997 11:51 AM
>To:	'netbsd-bugs@NetBSD.ORG'
>Subject:	failed install of i386 NetBSD 1.2
>
>I have the following configuration:
>
>	Single Pentium Pro 200 MHz
>	Adaptec 2940 Ultra/Ultra W BIOS v1.23
>	Seagate ST32550N SCSI Drive
>	ARCHIVE Python 00095-001 DAT Drive
>	96 MB Memory
>	256K L2 Cache
>
>I tried to use the "kcadp12.fs" to do the intsall.  The install bombs out and
>I get the following:
>
>	scsibus0 at ahc1
>	ahc1: targe 0 synchronous at 10.0MHz, offset= 0xf
>	sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST32550N, 0019> SCSI2 0/direct fixed
>	sd0: 2047MB, 3511 cyl, 11 head, 108 sec, 512 bytes/sec
>	ahc1:A:6: refuses WIDE negotiation.  Using 8bit transfers
>	ahc1: board is not responding
>	cmd fail
>	probe(ahc1:6:0): timed out in datain phase, SCSISIGI == 0x44
>	probe(ahc1:0:0): asserted ATN - device reset in message buffer
>	ahc1: board is not responding
>	cmd fail
>	sd1 at scsibus0 targ 6 lun 0: <, , > SCSI0 0/direct fixed
>	sd1: ahc1: board is not responding
>	ahc1: board is not responding
>	cmd fail
>	ahc1: board is not responding
>	cmd fail
>	fail integer divide fault in supervisor mode
>	trap type 8 code 0 eip f8185c8d cs 8 eflags 10246 cr2 0 cpl ffffffff
>	panic: trap
>
>	The operating system has halted
>	Please press any key to reboot
>
>
>Any ideas?  Thanks for any help.
>
>
>
>
>
>
>/abp
>
>--
>Adam B. Plummer
>Metamor Technologies, Ltd.
>One North Franklin St. (Suite 1500)
>Chicago, IL  60606
>WWW:	http://www.metamor.com/
>E-Mail:	adam.plummer@metamor.com
>Phone:	(312) 251-2455
>Fax:	(312) 251-2999
>Pager:	(312) 910-0395 or adam.plummer@pager.metamor.com
>
>