>Number:         5091
>Category:       port-amiga
>Synopsis:       grfcl0/1 found but ite3 is "not configured"
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    gnats-admin (GNATS administrator)
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Mar  1 15:05:04 1998
>Last-Modified:
>Originator:     Jim Dutton
>Organization:
	
>Release:        Amiga-1.3
>Environment:
	
System: NetBSD port45.aixdialin.siu.edu 1.3 NetBSD 1.3 (SQUEEZED) #0: Sun Mar 1 01:16:13 CST 1998 jimd@amiga1:/usr/src/sys/arch/amiga/compile/SQUEEZED amiga


>Description:
>How-To-Repeat:
reboot with Picasso-II installed
>Fix:
Temporary - remove Picasso-II graphics card and use ECS only. 
>Audit-Trail:
>Unformatted:
>description: with the Picasso-II+ graphics card installed, the boot process
		eventually winds up with a visible cursor, but no visible
		display. In the boot messages is an error message about
		ite3 being "not configured". This happened in the GENERIC
		kernel as well as a regenned kernel with unncessary options
		removed. The GRFCONFIG values weren't set up initially and
		had to be generated. Even with a default grf3 only, the same
		error occured.


		DMESG OUTPUT

NetBSD 1.3 (SQUEEZED) #0: Sun Mar  1 01:16:13 CST 1998
    jimd@amiga1:/usr/src/sys/arch/amiga/compile/SQUEEZED
Amiga 500/2000 (68060 rev.1 CPU/MMU/FPU)
real  mem = 33030144 (4032 pages)
avail mem = 29548544 (3607 pages)
using 214 buffers containing 1753088 bytes of memory
memory segment 0 at 8000000 size 1f80000
memory segment 1 at 0 size 200000
mainbus0 (root)
clock0 at mainbus0: CIA B system hz 100 hardware hz 715909
Calibrating delay loop... 21/1024 us
a2kbbc0 at mainbus0
ser0 at mainbus0: input fifo 4096 output fifo 32
par0 at mainbus0
kbd0 at mainbus0: CIA A type Amiga
ms0 at mainbus0
ms1 at mainbus0
grfcc0 at mainbus0
grf0 at grfcc0: width 640 height 400 colors 4
ite0 at grf0: rows 0 cols 0 repeat at (30/100)s next at (10/100)s has keyboard
fdc0 at mainbus0: dmabuf pa 0x1e5880: dmabuf ka 0x2be1880
fd0 at fdc0 unit 0: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
fd1 at fdc0 unit 1: 3.5dd 80 cyl, 2 head, 11 sec [9 sec], 512 bytes/sec
aucc0 at mainbus0
audio0 at aucc0
zbus0 at mainbus0: i/o size 0x00200000
bztzsc0 at zbus0 pa 0xea0000 man/pro 8512/24: address 0x2d3ff00: FAS216, 40MHz, SCSI ID 7
scsibus0 at bztzsc0: 8 targets
probe(bztzsc0:0:0): max sync rate 10.00Mb/s
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST34501N, 0015> SCSI2 0/direct fixed
sd0: 4339MB, 6576 cyl, 8 head, 168 sec, 512 bytes/sect x 8887200 sectors
grfcl0 at zbus0 pa 0x200000 man/pro 2167/11
grf3 at grfcl0: width 640 height 480 colors 16
ite3 at grf3: rows 60 cols 80 repeat at (30/100)s next at (10/100)s has keyboard
grfcl: 2MB Picasso II+ (with CL-GD5428) being used
grfcl1 at zbus0 pa 0xe90000 man/pro 2167/12
ite at grfcl1:  not configured
ed0 at zbus0 pa 0xec0000 man/pro 2121/1: address ae:55:53:00:16:24
ed0: length does not match next packet pointer
ed0: len 9f2f nlen fe2f start 0c first 00 curr 91 next ff stop 40
ed0: NIC memory corrupt - invalid packet length 65071
ed0: reset
10 views configured
root on sd0a dumps on sd0b
root file system type: ffs


		GRFCONFIG OUTPUT


 1: 640x480x1	36.9kHz @ 71Hz flags: +hsync +vsync
 2: 800x600x1	37.8kHz @ 60Hz flags: +hsync +vsync
 3: 640x480x8	36.9kHz @ 71Hz flags: +hsync +vsync
 4: 800x600x8	37.8kHz @ 60Hz flags: +hsync +vsync
 5: 1024x768x8	36.7kHz @ 45Hz flags: +hsync
 6: 896x605x8	37.2kHz @ 59Hz flags: +hsync +vsync
 7: 1088x605x8	37.2kHz @ 58Hz flags: +hsync +vsync
 8: 928x605x8	35.6kHz @ 56Hz flags: +hsync +vsync
 9: 640x480x24	31.2kHz @ 59Hz flags: +hsync
Console: 640x480 (80x60)	31.5kHz @ 60Hz flags: default