>Number:         12410
>Category:       port-mac68k
>Synopsis:       SE/30 crashes when scanning from HP ScanJet IIp w/ SANE
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    port-mac68k-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Mar 14 19:59:01 PST 2001
>Closed-Date:
>Last-Modified:
>Originator:     Shawn D'Alimonte
>Release:        1.5
>Organization:
none
>Environment:
SE/30, 8MB RAM
NetBSD trashcan 1.5 NetBSD 1.5 (SHAWND) #0: Sat Feb 24 15:32:01 EST 2001     root@:/usr/src/sys/arch/mac68k/compile/SHAWND mac68k
Custom kernel with sbc SCSI driver and modified ae driver (Changed register and RAM locations to match Cabletron card)

>Description:
SE/30 8MB RAM
160MB and 700MB HDDs internal 
HP ScanJet IIp and Apple CDROM external
Properly terminated
NetBSD 1.5 Custom kernel (Modified ae driver)
SANE 1.0.4

With the SBC driver the machine locks hard when running scanimage.  The 
scanner starts to scan but then stops but leaves the light on.  The SE/30 
locks up at this point.  Even the NMI switch does nothing.  With the NCR
driver the scanner does not even show up.

The scanner works in MacOS 7.5.5 with HP DeskScan II on the same machine.

dmesg output:
[ preserving 187797 bytes of netbsd a.out symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5 (SHAWND) #0: Sat Feb 24 15:32:01 EST 2001
    root@:/usr/src/sys/arch/mac68k/compile/SHAWND
Apple Macintosh SE/30  (68030)
cpu: delay factor 166
total memory = 8192 KB
avail memory = 4652 KB
using 128 buffers containing 512 KB of memory
mrg: 'Mac II class ROMs' ROM glue, tracing off, debug off, silent traps
mrg: I/O map kludge for ROMs that use hardware addresses directly.
mainbus0 (root)
obio0 at mainbus0
adb0 at obio0
asc0 at obio0: Apple Sound Chip
iwm0 at obio0: Apple GCR floppy disk controller
fd0 at iwm0 drive 0: (drive empty)
sbc0 at obio0: options=1<PDMA>
scsibus0 at sbc0: 8 targets, 8 luns per target
zsc0 at obio0 chip type 0 
zsc0 channel 0: d_speed   9600 DCD clk 0 CTS clk 0
zstty0 at zsc0 channel 0
zsc0 channel 1: d_speed   9600 DCD clk 0 CTS clk 0 shielding from LocalTalk
zstty1 at zsc0 channel 1
nubus0 at mainbus0
ae0 at nubus0 slot a: DNI Ethernet Card, 32KB memory
ae0: Ethernet address 00:00:1d:05:ec:36
macvid0 at nubus0 slot e: Macintosh SE/30 Internal Video
macvid0: 512 x 342, monochrome
macfb0 at macvid0
wsdisplay0 at macfb0: console (std, vt100 emulation)
fpu0 at mainbus0 (mc68882)
ae0: length does not match next packet pointer
ae0: len 0000 nlen ff00 start 12 first 00 curr 5e next 00 stop 80
ae0: NIC memory corrupt - invalid packet length 65280
adb0 (direct, II series): 2 targets
aed0 at adb0 addr 0: ADB Event device
akbd0 at adb0 addr 2: extended keyboard
wskbd0 at akbd0: console keyboard, using wsdisplay0
ams0 at adb0 addr 3: 1-button, 100 dpi mouse
wsmouse0 at ams0
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <QUANTUM, CTS160S, 4.07> SCSI2 0/direct fixed
sd0: 163 MB, 1536 cyl, 4 head, 54 sec, 512 bytes/sect x 333936 sectors
sd1 at scsibus0 target 1 lun 0: <QUANTUM, TRB730S, 043C> SCSI2 0/direct fixed
sd1: 699 MB, 3653 cyl, 4 head, 97 sec, 512 bytes/sect x 1431760 sectors
cd0 at scsibus0 target 4 lun 0: <MATSHITA, CD-ROM CR-8005, 2.0h> SCSI2 5/cdrom removable
uk0 at scsibus0 target 5 lun 0: <HP, C1790A, 3226> SCSI2 3/processor fixed
uk0: unknown device
ncr5380_done: sense asked for sense
ncr5380_done: sense asked for sense
ncr5380_done: sense asked for sense
ncr5380_done: sense asked for sense
ncr5380_done: sense asked for sense
ncr5380_done: sense asked for sense
ncr5380_done: sense asked for sense
boot device: sd1
root on sd1a dumps on sd1b
PRAM: 0x3aade7ab, macos_boottime: 0x3aade797.
root file system type: ffs

>How-To-Repeat:
- Setup SANE for an HP scanner on /dev/uk0.  
- Run 'scanimage'

>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted: