>Number:         14986
>Category:       kern
>Synopsis:       Sony Clie Memory Stick USB mass storage device fails
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Dec 17 19:41:00 PST 2001
>Closed-Date:
>Last-Modified:
>Originator:     Curt Sampson
>Release:        2001-12-16
>Organization:
NetBSD
>Environment:
System: NetBSD angelic.cynic.net 1.5Z NetBSD 1.5Z (GENERIC) #23: Sun Dec 16 21:41:45 JST 2001 cjs@angelic.cynic.net:/u/netbsd/src/sys/arch/i386/compile/GENERIC i386
Architecture: i386
Machine: i386
>Description:

Using my Sony Clie N600C (PalmOS 4.0) in the USB cradle, when I
run the "MSImport" application, it almost, but not quite, comes up
as a Sony Memory Stick USB mass storage device. This is the debug
(level 2) output:

usbd_reset_port: port 1 reset done, error=NORMAL_COMPLETION
usbd_new_device bus=0xc0b18000 port=1 depth=1 speed=2
usbd_setup_pipe: dev=0xc0bd4080 iface=0x0 ep=0xc0bd40a4 pipe=0xc0bd4084
usbd_new_device: adding unit addr=3, rev=110, class=0, subclass=0, protocol=0, maxpacket=16, len=18, speed=2
usbd_new_device: new dev (addr 3), dev=0xc0bd4080, parent=0xc0b13d40
usbd_probe_and_attach: trying device specific drivers
uvisor: vendor=0x54c, product=0x6d
usbd_probe_and_attach: no device specific driver found
usbd_probe_and_attach: looping over 1 configurations
usbd_probe_and_attach: trying config idx=0
usbd_set_config_index: status=0x0001, error=NORMAL_COMPLETION
usbd_set_config_index: (addr 1) cno=3 attr=0xc0, selfpowered=1, power=6
usbd_set_config_index: set config 1
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Sony Sony PEG Mass Storage, rev 1.10/1.00, addr 3
umass0: using SFF8070i over CBI-I
usbd_setup_pipe: dev=0xc0bd4080 iface=0xc0bd18a0 ep=0xc0bd1da8 pipe=0xd28125d4
usbd_setup_pipe: dev=0xc0bd4080 iface=0xc0bd18a0 ep=0xc0bd1db0 pipe=0xd28125d4
atapibus0 at umass0 channel 0: 2 targets
probe(umass0:0:0): invalid return code from adapter: 3

>How-To-Repeat:
See description.

>Fix:
Currently unknown.
>Release-Note:
>Audit-Trail:
>Unformatted: