>Number:         22517
>Category:       kern
>Synopsis:       aue0 interrupt errors on Soekris Net4801
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Aug 17 18:49:00 UTC 2003
>Closed-Date:
>Last-Modified:
>Originator:     Jun-ichiro itojun Hagino
>Release:        NetBSD 1.6W
>Organization:
	itojun.org
>Environment:
System: NetBSD starfruit.itojun.org 1.6W NetBSD 1.6W (STARFRUIT) #267: Sat Aug 16 15:20:15 JST 2003 itojun@starfruit.itojun.org:/home/itojun/NetBSD/src/sys/arch/i386/compile/STARFRUIT i386
Architecture: i386
Machine: i386
>Description:
	on Soekris Net4801 we see some errors like below:
		aue0: 1 usb errors on intr: IOERROR
	if it is a non-issue, we should probably suppress the log.
	if it is a real concern, let me know how i can investigate further.


NetBSD 1.6W (NET4801) #20: Sat Aug 16 05:33:20 JST 2003
	itojun@starfruit.itojun.org:/home/itojun/NetBSD/src/sys/arch/i386/compile/NET4801
total memory = 127 MB
avail memory = 110 MB
using 1659 buffers containing 6636 KB of memory
BIOS32 rev. 0 found at 0xf7840
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: National Semiconductor Geode GX1 (586-class), 266.62 MHz, id 0x540
cpu0: features 808131<FPU,TSC,MSR,CX8>
cpu0: features 808131<CMOV,MMX>
cpu0: I-cache 12K uOp cache 8-way
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Cyrix Corporation MediaGX Built-in PCI Host Controller (rev. 0x00)
sip0 at pci0 dev 6 function 0: NatSemi DP83815 10/100 Ethernet, rev 00
sip0: interrupting at irq 10
sip0: Ethernet address 00:00:24:c1:34:cc
nsphyter0 at sip0 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sip1 at pci0 dev 7 function 0: NatSemi DP83815 10/100 Ethernet, rev 00
sip1: interrupting at irq 10
sip1: Ethernet address 00:00:24:c1:34:cd
nsphyter1 at sip1 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sip2 at pci0 dev 8 function 0: NatSemi DP83815 10/100 Ethernet, rev 00
sip2: interrupting at irq 10
sip2: Ethernet address 00:00:24:c1:34:ce
nsphyter2 at sip2 phy 0: DP83815 10/100 media interface, rev. 1
nsphyter2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 18 function 0
pcib0: National Semiconductor SC1100 PCI-ISA bridge (rev. 0x00)
pciide0 at pci0 dev 18 function 2: National Semiconductor product 0x0502 (rev. 0x01)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel ignored (other hardware responding at addresses)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
National Semiconductor SC1100 X-Bus (miscellaneous bridge) at pci0 dev 18 function 5 not configured
ohci0 at pci0 dev 19 function 0: Compaq USB Controller (rev. 0x08)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFB-1024>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 977 MB, 1986 cyl, 16 head, 63 sec, 512 bytes/sect x 2001888 sectors
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
aue0 at uhub0 port 1
aue0: LUA2-TX BUFFALO LUA2-TX, rev 1.10/1.01, addr 2
aue0: Ethernet address 00:40:26:c0:a9:6c
acphy0 at aue0 phy 1: ACXXX 10/100 media interface, rev. 0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pppoe1: pap failure
pppoe1: pap failure
pppoe1: pap failure
pppoe1: pap failure
pppoe1: pap failure
pppoe1: authentication failed 5 times, not retrying again
aue0: 1 usb errors on intr: IOERROR
aue0: 1 usb errors on intr: IOERROR
arp info overwritten for 202.232.15.90 by 00:03:93:c3:a7:e0
aue0: 1 usb errors on intr: IOERROR
aue0: 1 usb errors on intr: IOERROR
aue0: 1 usb errors on intr: IOERROR
aue0: 1 usb errors on intr: IOERROR
aue0: 1 usb errors on intr: IOERROR
aue0: 1 usb errors on intr: IOERROR
pppoe1: pap failure
pppoe1: pap failure
pppoe1: pap failure
pppoe1: pap failure
pppoe1: pap failure
pppoe1: authentication failed 5 times, not retrying again
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted: