Subject: port-i386/26060: ACPI: panic: npxdna vector not initialised
To: None <gnats-bugs@gnats.NetBSD.org>
From: None <abs@absd.org>
List: netbsd-bugs
Date: 06/25/2004 21:17:54
>Number: 26060
>Category: port-i386
>Synopsis: ACPI: panic: npxdna vector not initialised
>Confidential: yes
>Severity: serious
>Priority: medium
>Responsible: port-i386-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Fri Jun 25 20:19:00 UTC 2004
>Closed-Date:
>Last-Modified:
>Originator: John Q Root
>Release: NetBSD 2.0_BETA
>Organization:
>Environment:
System: NetBSD descent.purplei.com 2.0_BETA NetBSD 2.0_BETA (_X86_NOACPI_GATEWAY_) #2: Thu Jun 24 22:46:36 BST 2004 abs@tll.i.purplei.com:/var/obj/i386/files/netbsd/2.0/sys/arch/i386/compile/_X86_NOACPI_GATEWAY_ i386
Architecture: i386
Machine: i386
>Description:
A kernel with ACPI enabled panics on boot on a PII gateway (multiple network cards)
machine.
The panic occurs when the interfaces are used (typically by altq on the current
config).
dmesg from GENERIC+PCI_CONFIG_DUMP
NetBSD 2.0_BETA (_DEBUG_) #0: Fri Jun 25 16:44:27 BST 2004
abs@tll.i.purplei.com:/tmp/_DEBUG_
total memory = 255 MB
avail memory = 242 MB
BIOS32 rev. 0 found at 0xfb520
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (Klamath) (686-class), 233.88 MHz, id 0x633
cpu0: features 80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 80f9ff<PGE,MCA,CMOV,MMX>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: PCI configuration registers:
Common header:
0x00: 0x71808086 0x22900006 0x06000003 0x00002000
Vendor Name: Intel (0x8086)
Device Name: 82443LX PCI AGP Controller (PAC) (0x7180)
Command register: 0x0006
I/O space accesses: off
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x2290
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: on
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: host (0x00)
Interface: 0x00
Revision ID: 0x03
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x20
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0xe0000008 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x000000a0 0x00000000 0x00000000
Base address register at 0x10
type: 32-bit prefetchable memory
base: 0xe0000000, not sized
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xa0
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Capability register at 0xa0
type: 0x02 (AGP, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0xc3008004 0x01faee00 0x001110ec 0x00000000
0x60: 0x10100808 0x20202018 0x00000000 0x55555555
0x70: 0x000a1020 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x000000d8 0x00001810 0x00000000 0x00000000
0xa0: 0x00100002 0x1f000203 0x00000000 0x00000000
0xb0: 0x00000200 0x00000038 0x00000000 0x00001020
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x03fd0000 0x00000f20 0x00000000
Don't know how to pretty-print device-dependent header.
Intel 82443LX PCI AGP Controller (PAC) (host bridge, revision 0x03) at ? dev 0 function 0 (tag 0x80000000, intrtag 0x80000000, intrswiz 0, intrpin 0, i/o off, mem on, no quirks)
pchb0: Intel 82443LX PCI AGP Controller (PAC) (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x2000000
ppb0 at pci0 dev 1 function 0: PCI configuration registers:
Common header:
0x00: 0x71818086 0x02a00107 0x06040003 0x00014000
Vendor Name: Intel (0x8086)
Device Name: 82443LX AGP Interface (PAC) (0x7181)
Command register: 0x0107
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): on
Fast back-to-back transactions: off
Status register: 0x02a0
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: PCI (0x04)
Interface: 0x00
Revision ID: 0x03
BIST: 0x00
Header Type: 0x01 (0x01)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 1 (PCI-PCI bridge) header:
0x10: 0x00000000 0x00000000 0x40010100 0x22a0e0e0
0x20: 0xdff0dc00 0xbff0bc00 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x000b0000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Primary bus number: 0x00
Secondary bus number: 0x01
Subordinate bus number: 0x01
Secondary bus latency timer: 0x40
Secondary status register: 0x22a0
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Signaled Target Abort: off
Received Target Abort: off
Received Master Abort: on
System Error: off
Parity Error: off
I/O region:
base register: 0xe0
limit register: 0xe0
base upper 16 bits register: 0x0000
limit upper 16 bits register: 0x0000
Memory region:
base register: 0xdc00
limit register: 0xdff0
Prefetchable memory region:
base register: 0xbc00
limit register: 0xbff0
base upper 32 bits register: 0x00000000
limit upper 32 bits register: 0x00000000
Reserved @ 0x34: 0x00000000
Expansion ROM Base Address: 0x00000000
Interrupt line: 0x00
Interrupt pin: 0x00 (none)
Bridge control register: 0x000b
Parity error response: on
Secondary SERR forwarding: on
ISA enable: off
VGA enable: on
Master abort reporting: off
Secondary bus reset: off
Fast back-to-back capable: off
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Intel 82443LX AGP Interface (PAC) (PCI bridge, revision 0x03) at ? dev 1 function 0 (tag 0x80000800, intrtag 0x80000800, intrswiz 0, intrpin 0, i/o on, mem on, no quirks): Intel 82443LX AGP Interface (PAC) (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: PCI configuration registers:
Common header:
0x00: 0x47421002 0x02900087 0x0300005c 0x00002008
Vendor Name: ATI Technologies (0x1002)
Device Name: 3D Rage Pro (AGP) (0x4742)
Command register: 0x0087
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: on
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0290
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: display (0x03)
Subclass Name: VGA (0x00)
Interface: 0x00
Revision ID: 0x5c
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x20
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xbc000008 0x0000e001 0xdd000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00801002
0x30: 0x00000000 0x00000050 0x00000000 0x000801ff
Base address register at 0x10
type: 32-bit prefetchable memory
base: 0xbc000000, size: 0x01000000
Base address register at 0x14
type: 32-bit i/o
base: 0x0000e000, size: 0x00000100
Base address register at 0x18
type: 32-bit nonprefetchable memory
base: 0xdd000000, size: 0x00001000
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1002
Subsystem ID: 0x0080
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x50
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x08
Interrupt pin: 0x01 (pin A)
Interrupt line: 0xff
Capability register at 0x50
type: 0x02 (AGP, rev. 1.0)
Device-dependent header:
0x40: 0x0000000c 0x00000000 0x00000000 0x00000000
0x50: 0x00100002 0xff000203 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies 3D Rage Pro (AGP) (VGA display, revision 0x5c) at ? dev 0 function 0 (tag 0x80010000, intrtag 0x80000800, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): ATI Technologies 3D Rage Pro (AGP) (rev. 0x5c)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0: PCI configuration registers:
Common header:
0x00: 0x71108086 0x0280000f 0x06010001 0x00800000
Vendor Name: Intel (0x8086)
Device Name: 82371AB PCI-to-ISA Bridge (PIIX4) (0x7110)
Command register: 0x000f
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: on
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: ISA (0x01)
Interface: 0x00
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00+multifunction (0x80)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x0031004d
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x0b05090a 0x00000010 0x0000f200 0x00000000
0x70: 0x00000000 0x0c0c0000 0x00000000 0x00000000
0x80: 0x00070000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x40000005 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x21000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000f28 0x00000000
Don't know how to pretty-print device-dependent header.
Intel 82371AB PCI-to-ISA Bridge (PIIX4) (ISA bridge, revision 0x01) at ? dev 2 function 0 (tag 0x80001000, intrtag 0x80001000, intrswiz 0, intrpin 0, i/o on, mem on, no quirks)
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x01)
piixide0 at pci0 dev 2 function 1: PCI configuration registers:
Common header:
0x00: 0x71118086 0x02800005 0x01018001 0x00002000
Vendor Name: Intel (0x8086)
Device Name: 82371AB IDE controller (PIIX4) (0x7111)
Command register: 0x0005
I/O space accesses: on
Memory space accesses: off
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: mass storage (0x01)
Subclass Name: IDE (0x01)
Interface: 0x80
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x20
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x0000f001 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
type: 16-bit i/o
base: 0x0000f000, size: 0x00000010
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Device-dependent header:
0x40: 0xa307a307 0x00000000 0x00000001 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000f28 0x00000000
Don't know how to pretty-print device-dependent header.
Intel 82371AB IDE controller (PIIX4) (IDE mass storage, interface 0x80, revision 0x01) at ? dev 2 function 1 (tag 0x80001100, intrtag 0x80001100, intrswiz 0, intrpin 0, i/o on, mem off, no quirks)
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 2 function 2: PCI configuration registers:
Common header:
0x00: 0x71128086 0x02800005 0x0c030001 0x00002000
Vendor Name: Intel (0x8086)
Device Name: 82371AB USB Host Controller (PIIX4) (0x7112)
Command register: 0x0005
I/O space accesses: on
Memory space accesses: off
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: USB (0x03)
Interface: 0x00
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x20
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00006401 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x0000040b
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
type: 16-bit i/o
base: 0x00006400, size: 0x00000020
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x04 (pin D)
Interrupt line: 0x0b
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000010 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00002000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000f28 0x00000000
Don't know how to pretty-print device-dependent header.
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision 0x01) at ? dev 2 function 2 (tag 0x80001200, intrtag 0x80001200, intrswiz 0, intrpin 0x4, i/o on, mem off, no quirks): Intel 82371AB USB Host Controller (PIIX4) (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x01) at pci0 dev 2 function 3: PCI configuration registers:
Common header:
0x00: 0x71138086 0x02800003 0x06800001 0x00000000
Vendor Name: Intel (0x8086)
Device Name: 82371AB Power Management Controller (PIIX4) (0x7113)
Command register: 0x0003
I/O space accesses: on
Memory space accesses: on
Bus mastering: off
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: miscellaneous (0x80)
Interface: 0x00
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Device-dependent header:
0x40: 0x00004f01 0x00000000 0x00003000 0x00000000
0x50: 0x001f5800 0x00000000 0x03052004 0x00000000
0x60: 0x00830294 0x10000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000001 0x00000000 0x00000000 0x00000000
0x90: 0x00005f01 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00010000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000f28 0x00000000
Don't know how to pretty-print device-dependent header.
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x01) at pci0 dev 2 function 3 (tag 0x80001300, intrtag 0x80001300, intrswiz 0, intrpin 0, i/o on, mem on, no quirks) not configured
vr0 at pci0 dev 13 function 0: PCI configuration registers:
Common header:
0x00: 0x30431106 0x02000007 0x02000006 0x00002008
Vendor Name: VIA Technologies (0x1106)
Device Name: VT3043 (Rhine) 10/100 Ethernet (0x3043)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0200
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x06
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x20
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0x00006501 0xe2000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x14001186
0x30: 0x00000000 0x00000000 0x00000000 0x9876010a
Base address register at 0x10
type: 32-bit i/o
base: 0x00006500, size: 0x00000080
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xe2000000, size: 0x00000080
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1186
Subsystem ID: 0x1400
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x98
Minimum Grant: 0x76
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0a
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT3043 (Rhine) 10/100 Ethernet (ethernet network, revision 0x06) at ? dev 13 function 0 (tag 0x80006800, intrtag 0x80006800, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): VIA VT3043 (Rhine) 10/100 Ethernet
vr0: interrupting at irq 10
vr0: Ethernet address: 00:50:ba:c5:ad:43
dmphy0 at vr0 phy 8: DM9101 (AMD Am79C873) 10/100 media interface, rev. 0
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0 at pci0 dev 14 function 0: PCI configuration registers:
Common header:
0x00: 0x905010b7 0x02000007 0x02000000 0x00002000
Vendor Name: 3Com (0x10b7)
Device Name: 3c905-TX 10/100 Ethernet (0x9050)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0200
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x20
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00006601 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x08030109
Base address register at 0x10
type: 32-bit i/o
base: 0x00006600, size: 0x00000040
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x0000
Subsystem ID: 0x0000
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x08
Minimum Grant: 0x03
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x09
Device-dependent header:
0x40: 0x016302d8 0x00000000 0x0000e040 0x00020002
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
3Com 3c905-TX 10/100 Ethernet (ethernet network) at ? dev 14 function 0 (tag 0x80007000, intrtag 0x80007000, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at irq 9
ex0: MAC address 00:60:08:5d:59:80
nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp0 at pci0 dev 15 function 0: PCI configuration registers:
Common header:
0x00: 0x00091011 0x02800007 0x02000022 0x00002008
Vendor Name: Digital Equipment (0x1011)
Device Name: DECchip 21140 ("FasterNet") 10/100 Ethernet (0x0009)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x22
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x20
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0x00006701 0xe2001000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x11001186
0x30: 0x00000000 0x00000000 0x00000000 0x28140105
Base address register at 0x10
type: 32-bit i/o
base: 0x00006700, size: 0x00000080
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xe2001000, size: 0x00000080
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1186
Subsystem ID: 0x1100
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x28
Minimum Grant: 0x14
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x05
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Digital Equipment DECchip 21140 ("FasterNet") 10/100 Ethernet (ethernet network, revision 0x22) at ? dev 15 function 0 (tag 0x80007800, intrtag 0x80007800, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): DECchip 21140A Ethernet, pass 2.2
tlp0: interrupting at irq 5
tlp0: Ethernet address 00:80:c8:27:f0:3e
lxtphy0 at tlp0 phy 0: LXT970 10/100 media interface, rev. 1
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp1 at pci0 dev 16 function 0: PCI configuration registers:
Common header:
0x00: 0x00091011 0x02800007 0x02000022 0x00002008
Vendor Name: Digital Equipment (0x1011)
Device Name: DECchip 21140 ("FasterNet") 10/100 Ethernet (0x0009)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0280
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x22
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x20
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0x00006801 0xe2002000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x11001186
0x30: 0x00000000 0x00000000 0x00000000 0x2814010b
Base address register at 0x10
type: 32-bit i/o
base: 0x00006800, size: 0x00000080
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xe2002000, size: 0x00000080
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1186
Subsystem ID: 0x1100
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x28
Minimum Grant: 0x14
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0b
Device-dependent header:
0x40: 0x00000200 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Digital Equipment DECchip 21140 ("FasterNet") 10/100 Ethernet (ethernet network, revision 0x22) at ? dev 16 function 0 (tag 0x80008000, intrtag 0x80008000, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): DECchip 21140A Ethernet, pass 2.2
tlp1: interrupting at irq 11
tlp1: Ethernet address 00:80:c8:27:f4:4f
lxtphy1 at tlp1 phy 0: LXT970 10/100 media interface, rev. 1
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
raidattach: Asked for 8 units
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <FUJITSU MPE3064AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6187 MB, 13410 cyl, 15 head, 63 sec, 512 bytes/sect x 12672450 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1 at atabus1 drive 0: <QUANTUM BIGFOOT_CY4320A>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 4134 MB, 8960 cyl, 15 head, 63 sec, 512 bytes/sect x 8467200 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2
wd1(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
Searching for RAID components...
Component on: wd0a: 8467137
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 298374443 Mod Counter: 299
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1 blocksize: 512 numBlocks: 8467072
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
Component on: wd1a: 8467137
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 298374443 Mod Counter: 299
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1 blocksize: 512 numBlocks: 8467072
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
Found: wd0a at 0
Found: wd1a at 1
RAID autoconfigure
Configuring raid0:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: wd0a at 0
Looking for 1 in autoconfig
Found: wd1a at 1
raid0: allocating 20 buffers of 65536 bytes.
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 8467072 (4134 MB)
boot device: raid0
root on raid0a dumps on raid0b
mountroot: trying smbfs...
mountroot: trying coda...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Boot ACPI kernel on box
>Fix:
Unknown
>Release-Note:
>Audit-Trail:
>Unformatted:
!DSPAM:40dc88cb261922888918823!