Subject: port-i386/26074: Boot failure on shuttle ST61G4, plus ACPI problems
To: None <gnats-bugs@gnats.NetBSD.org>
From: None <abs@absd.org>
List: netbsd-bugs
Date: 06/26/2004 23:35:32
>Number: 26074
>Category: port-i386
>Synopsis: Boot failure on shuttle ST61G4, plus ACPI problems
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-i386-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sat Jun 26 22:36:00 UTC 2004
>Closed-Date:
>Last-Modified:
>Originator: David Brownlee
>Release: NetBSD 2.0_BETA
>Organization:
>Environment:
System: NetBSD zoe.i.purplei.com 2.0_BETA NetBSD 2.0_BETA (_X86_MP_) #2: Thu Jun 24 22:36:16 BST 2004 abs@tll.i.purplei.com:/var/obj/i386/files/netbsd/2.0/sys/arch/i386/compile/_X86_MP_ i386
Architecture: i386
Machine: i386
>Description:
The ST61G4 is a P4, RADEON 9100 IGP, based SFF box.
- A generic kernel hangs after
isapnp0: no ISA Plug 'n Play devices found
- An ACPI kernel boots, but the keyboard and mouse are non
functional (the keyboard works in the bootloader). Similarly
a USB keyboard plugged in at boot time will not work, but if
is plugged in after boot it does (unplus and replug works).
ehci was enabled in the kernel.
The reboot command hangs after shutting down cleanly.
XFree seems happy to run on the RADEON 9100 IGP
dmesg from an ACPI + PCI_CONFIG_DUMP follows:
NetBSD 2.0_BETA (_DEBUG_ACPI_) #0: Sat Jun 26 23:09:41 BST 2004
abs@tll.i.purplei.com:/tmp/_DEBUG_ACPI_
total memory = 222 MB
avail memory = 211 MB
BIOS32 rev. 0 found at 0xfb420
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Celeron (686-class), 2394.50 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: ITLB 4K/4M: 128 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 153 MHz
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <XPC ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
PNP0C02 at acpi0 not configured
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
lpt0 at acpi0 (PNP0400-1)
lpt0: io 0x378-0x37f irq 7
pckbc0 at acpi0 (PNP0F13): aux port
pckbc0: irq 12
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
PNP0C0B at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
pckbd: error setting scanset 2
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: PCI configuration registers:
Common header:
0x00: 0x58331002 0x32300006 0x06000002 0x00004000
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x5833
Command register: 0x0006
I/O space accesses: off
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x3230
Capability List support: on
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: on
Master received Master Abort: on
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: host (0x00)
Interface: 0x00
Revision ID: 0x02
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0xe0000008 0xec004000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x000000a0 0x00000000 0x00000000
Base address register at 0x10
type: 32-bit prefetchable memory
base: 0xe0000000, not sized
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xec004000, not sized
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xa0
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Capability register at 0xa0
type: 0x02 (AGP, rev. 3.0)
Device-dependent header:
0x40: 0x64110000 0x00000308 0x00000000 0x00000d05
0x50: 0xf3611297 0xc0003581 0x11111000 0x00000033
0x60: 0x00000cb5 0x7ee22624 0x00270a00 0x541b0023
0x70: 0x30600821 0x86868686 0x08000a83 0xc0300380
0x80: 0x00000000 0x00831092 0x00100030 0xc0002022
0x90: 0x0e000000 0x0f0e0f0e 0x00080000 0x00000080
0xa0: 0x00300002 0x1f00021b 0x00000200 0x00000000
0xb0: 0x00000000 0x00000f30 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x000f0100 0x004fff2b 0x5060006a 0x00000000
0xe0: 0x00000000 0x00400000 0x0000001b 0x00000005
0xf0: 0x0001001f 0x00000000 0x00000003 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x5833 (host bridge, revision 0x02) at ? dev 0 function 0 (tag 0x80000000, intrtag 0x80000000, intrswiz 0, intrpin 0, i/o off, mem on, no quirks)
pchb0: ATI Technologies product 0x5833 (rev. 0x02)
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0: PCI configuration registers:
Common header:
0x00: 0x58381002 0x02200107 0x06040000 0x00014000
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x5838
Command register: 0x0107
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): on
Fast back-to-back transactions: off
Status register: 0x0220
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: PCI (0x04)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x01 (0x01)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 1 (PCI-PCI bridge) header:
0x10: 0x00000000 0x00000000 0x20010100 0x2220b1b1
0x20: 0xe9f0e800 0xe7f0e400 0x00000000 0xf3611297
0x30: 0x00000000 0x00000000 0x00000000 0x000e0000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Primary bus number: 0x00
Secondary bus number: 0x01
Subordinate bus number: 0x01
Secondary bus latency timer: 0x20
Secondary status register: 0x2220
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Signaled Target Abort: off
Received Target Abort: off
Received Master Abort: on
System Error: off
Parity Error: off
I/O region:
base register: 0xb1
limit register: 0xb1
base upper 16 bits register: 0x0000
limit upper 16 bits register: 0x0000
Memory region:
base register: 0xe800
limit register: 0xe9f0
Prefetchable memory region:
base register: 0xe400
limit register: 0xe7f0
base upper 32 bits register: 0x00000000
limit upper 32 bits register: 0xf3611297
Reserved @ 0x34: 0x00000000
Expansion ROM Base Address: 0x00000000
Interrupt line: 0x00
Interrupt pin: 0x00 (none)
Bridge control register: 0x000e
Parity error response: off
Secondary SERR forwarding: on
ISA enable: on
VGA enable: on
Master abort reporting: off
Secondary bus reset: off
Fast back-to-back capable: off
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0xf3611297
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0xffc70080 0x000000ff 0xdfffffff 0xffffffff
0x70: 0x9d089d08 0x02080208 0x08180616 0x67160761
0x80: 0x00000000 0x00000000 0x00000000 0x0000f618
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00163610 0x3e040f3c 0x00000000 0x16b10a20
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x5838 (PCI bridge) at ? dev 1 function 0 (tag 0x80000800, intrtag 0x80000800, intrswiz 0, intrpin 0, i/o on, mem on, no quirks): ATI Technologies product 0x5838 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: PCI configuration registers:
Common header:
0x00: 0x58341002 0x02b00007 0x03000000 0x00004008
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x5834
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x02b0
Capability List support: on
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: display (0x03)
Subclass Name: VGA (0x00)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xe4000008 0x0000b001 0xe9000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x00000058 0x00000000 0x0008010b
Base address register at 0x10
type: 32-bit prefetchable memory
base: 0xe4000000, size: 0x04000000
Base address register at 0x14
type: 32-bit i/o
base: 0x0000b000, size: 0x00000100
Base address register at 0x18
type: 32-bit nonprefetchable memory
base: 0xe9000000, size: 0x00010000
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x58
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x08
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0b
Capability register at 0x58
type: 0x02 (AGP, rev. 3.0)
Capability register at 0x50
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0xf3611297
0x50: 0x06020001 0x00000000 0x00305002 0xff001e3b
0x60: 0x00000200 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x5834 (VGA display) at ? dev 5 function 0 (tag 0x80012800, intrtag 0x80000800, intrswiz 0x5, intrpin 0x2, i/o on, mem on, no quirks): ATI Technologies product 0x5834 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 19 function 0: PCI configuration registers:
Common header:
0x00: 0x43471002 0x02a00007 0x0c031001 0x00804008
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x4347
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x02a0
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: USB (0x03)
Interface: 0x10
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00+multifunction (0x80)
Latency Timer: 0x40
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xec000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x00000000 0x00000000 0x00000103
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xec000000, size: 0x00001000
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x03
Device-dependent header:
0x40: 0x0000ff80 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000020 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x08020001
0xe0: 0x00400000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x4347 (USB serial bus, interface 0x10, revision 0x01) at ? dev 19 function 0 (tag 0x80009800, intrtag 0x80009800, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): ATI Technologies product 0x4347 (rev. 0x01)
ohci0: interrupting at ioapic0 pin 19 (irq 3)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1: PCI configuration registers:
Common header:
0x00: 0x43481002 0x02a00007 0x0c031001 0x00004008
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x4348
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x02a0
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: USB (0x03)
Interface: 0x10
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xec001000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x00000000 0x00000000 0x00000103
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xec001000, size: 0x00001000
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x03
Device-dependent header:
0x40: 0x0000ff80 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000020 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x08020001
0xe0: 0x00400000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x4348 (USB serial bus, interface 0x10, revision 0x01) at ? dev 19 function 1 (tag 0x80009900, intrtag 0x80009900, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): ATI Technologies product 0x4348 (rev. 0x01)
ohci1: interrupting at ioapic0 pin 19 (irq 3)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 2: PCI configuration registers:
Common header:
0x00: 0x43451002 0x02b00007 0x0c032001 0x00004008
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x4345
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x02b0
Capability List support: on
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: USB (0x03)
Interface: 0x20
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xec002000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x000000dc 0x00000000 0x00000103
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xec002000, size: 0x00001000
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xdc
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x03
Capability register at 0xdc
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x0000ff80 0x00000000 0x00000000 0x00000000
0x50: 0x000000c0 0x00000000 0x00000000 0x00000000
0x60: 0x00002020 0x00002000 0x00002000 0x00002000
0x70: 0x00002000 0x00002000 0x00002000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000001 0xc0000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x7e020001
0xe0: 0x00400000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x4345 (USB serial bus, interface 0x20, revision 0x01) at ? dev 19 function 2 (tag 0x80009a00, intrtag 0x80009a00, intrswiz 0, intrpin 0x1, i/o on, mem on, no quirks): ATI Technologies product 0x4345 (rev. 0x01)
ehci0: interrupting at ioapic0 pin 19 (irq 3)
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ATI Technologie EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
ATI Technologies product 0x4353 (SMBus serial bus, revision 0x17) at pci0 dev 20 function 0: PCI configuration registers:
Common header:
0x00: 0x43531002 0x02200003 0x0c050017 0x00800000
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x4353
Command register: 0x0003
I/O space accesses: on
Memory space accesses: on
Bus mastering: off
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0220
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: SMBus (0x05)
Interface: 0x00
Revision ID: 0x17
BIST: 0x00
Header Type: 0x00+multifunction (0x80)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x0000c001 0xec003000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x00000000 0x00000000 0x00000000
Base address register at 0x10
type: 32-bit i/o
base: 0x0000c000, size: 0x00000010
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xec003000, size: 0x00000400
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Device-dependent header:
0x40: 0x000031d4 0x00000000 0x0043ff0f 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00030001 0xcf9ebb9f 0x00009000 0x00000000
0x70: 0x00000000 0xfec00008 0x00004eff 0x00000000
0x80: 0x00000e0f 0x00000000 0x00000000 0x8000008c
0x90: 0x0000c001 0x00001202 0x00000000 0x00000000
0xa0: 0xffff0000 0x0000ffff 0x003f3f00 0x000000c0
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00010000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x4353 (SMBus serial bus, revision 0x17) at pci0 dev 20 function 0 (tag 0x8000a000, intrtag 0x8000a000, intrswiz 0, intrpin 0, i/o on, mem on, no quirks) not configured
pciide0 at pci0 dev 20 function 1: PCI configuration registers:
Common header:
0x00: 0x43491002 0x0a000005 0x01018a00 0x00004000
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x4349
Command register: 0x0005
I/O space accesses: on
Memory space accesses: off
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0a00
Capability List support: off
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: on
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: mass storage (0x01)
Subclass Name: IDE (0x01)
Interface: 0x8a
Revision ID: 0x00
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000001 0x00000001 0x00000001 0x00000001
0x20: 0x0000f001 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x00000000 0x00000000 0x00000105
Base address register at 0x10
type: 16-bit i/o
base: 0x00000000, size: 0x00000008
Base address register at 0x14
type: 16-bit i/o
base: 0x00000000, size: 0x00000004
Base address register at 0x18
type: 16-bit i/o
base: 0x00000000, size: 0x00000008
Base address register at 0x1c
type: 16-bit i/o
base: 0x00000000, size: 0x00000004
Base address register at 0x20
type: 16-bit i/o
base: 0x0000f000, size: 0x00000010
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x05
Device-dependent header:
0x40: 0x99992099 0xffff20ff 0x00040000 0x00000000
0x50: 0x00000000 0x00050001 0x00000000 0x00000000
0x60: 0x00010000 0x6c1e6c00 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x4349 (IDE mass storage, interface 0x8a) at ? dev 20 function 1 (tag 0x8000a100, intrtag 0x8000a100, intrswiz 0, intrpin 0x1, i/o on, mem off, no quirks)
pciide0: ATI Technologies product 0x4349 (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
pciide0: secondary channel ignored (not responding; disabled or no drives?)
pcib0 at pci0 dev 20 function 3: PCI configuration registers:
Common header:
0x00: 0x434c1002 0x0220000f 0x06010000 0x00800000
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x434c
Command register: 0x000f
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: on
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0220
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: ISA (0x01)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x00+multifunction (0x80)
Latency Timer: 0x00
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0x00000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x00000000 0x00000000 0x00000000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x00 (none)
Interrupt line: 0x00
Device-dependent header:
0x40: 0x00000004 0x4c00037f 0x0000ff83 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x000f000e 0xffffffb8
0x70: 0x01234567 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x434c (ISA bridge) at ? dev 20 function 3 (tag 0x8000a300, intrtag 0x8000a300, intrswiz 0, intrpin 0, i/o on, mem on, no quirks)
pcib0: ATI Technologies product 0x434c (rev. 0x00)
ppb1 at pci0 dev 20 function 4: PCI configuration registers:
Common header:
0x00: 0x43421002 0x0aa00107 0x06040100 0x00814000
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x4342
Command register: 0x0107
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): on
Fast back-to-back transactions: off
Status register: 0x0aa0
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: on
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: bridge (0x06)
Subclass Name: PCI (0x04)
Interface: 0x01
Revision ID: 0x00
BIST: 0x00
Header Type: 0x01+multifunction (0x81)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 1 (PCI-PCI bridge) header:
0x10: 0x00000000 0x00000000 0x20020200 0x3280a090
0x20: 0xebf0ea00 0x0000fff0 0x00000000 0x00000000
0x30: 0x00000000 0x00000000 0x00000000 0x04060000
Base address register at 0x10
not implemented(?)
Base address register at 0x14
not implemented(?)
Primary bus number: 0x00
Secondary bus number: 0x02
Subordinate bus number: 0x02
Secondary bus latency timer: 0x20
Secondary status register: 0x3280
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Signaled Target Abort: off
Received Target Abort: on
Received Master Abort: on
System Error: off
Parity Error: off
I/O region:
base register: 0x90
limit register: 0xa0
base upper 16 bits register: 0x0000
limit upper 16 bits register: 0x0000
Memory region:
base register: 0xea00
limit register: 0xebf0
Prefetchable memory region:
base register: 0xfff0
limit register: 0x0000
base upper 32 bits register: 0x00000000
limit upper 32 bits register: 0x00000000
Reserved @ 0x34: 0x00000000
Expansion ROM Base Address: 0x00000000
Interrupt line: 0x00
Interrupt pin: 0x00 (none)
Bridge control register: 0x0406
Parity error response: off
Secondary SERR forwarding: on
ISA enable: on
VGA enable: off
Master abort reporting: off
Secondary bus reset: off
Fast back-to-back capable: off
Device-dependent header:
0x40: 0xff3c0024 0x00000000 0xc00f0300 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x06020001
0xe0: 0x00800000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x4342 (PCI bridge, interface 0x01) at ? dev 20 function 4 (tag 0x8000a400, intrtag 0x8000a400, intrswiz 0, intrpin 0, i/o on, mem on, no quirks): ATI Technologies product 0x4342 (rev. 0x00)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
satalink0 at pci2 dev 5 function 0: PCI configuration registers:
Common header:
0x00: 0x35121095 0x02b00007 0x01040001 0x00004008
Vendor Name: CMD Technology (0x1095)
Device Name: SiI3512 SATALink (0x3512)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x02b0
Capability List support: on
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: on
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: mass storage (0x01)
Subclass Name: RAID (0x04)
Interface: 0x00
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0x00009001 0x00009401 0x00009801 0x00009c01
0x20: 0x0000a001 0xeb002000 0x00000000 0x65121095
0x30: 0x00000000 0x00000060 0x00000000 0x00000105
Base address register at 0x10
type: 32-bit i/o
base: 0x00009000, size: 0x00000008
Base address register at 0x14
type: 32-bit i/o
base: 0x00009400, size: 0x00000004
Base address register at 0x18
type: 32-bit i/o
base: 0x00009800, size: 0x00000008
Base address register at 0x1c
type: 32-bit i/o
base: 0x00009c00, size: 0x00000004
Base address register at 0x20
type: 32-bit i/o
base: 0x0000a000, size: 0x00000010
Base address register at 0x24
type: 32-bit nonprefetchable memory
base: 0xeb002000, size: 0x00000200
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1095
Subsystem ID: 0x6512
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x60
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x05
Capability register at 0x60
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000002 0x45a80202 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x06220001 0x64004000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000022 0x00000022 0x00000000 0x576f8d87
0x90: 0x08000000 0x0000ffff 0x18000000 0x00000000
0xa0: 0x65150101 0x62dd62dd 0x43924392 0x40094009
0xb0: 0x65150101 0x62dd62dd 0x43924392 0x40094009
0xc0: 0x00000144 0x80008091 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
CMD Technology SiI3512 SATALink (RAID mass storage, revision 0x01) at ? dev 5 function 0 (tag 0x80022800, intrtag 0x8000a400, intrswiz 0x5, intrpin 0x2, i/o on, mem on, no quirks)
satalink0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: SATALink BA5 register space disabled
satalink0: bus-master DMA support present
satalink0: primary channel wired to native-PCI mode
satalink0: using ioapic0 pin 17 (irq 5) for native-PCI interrupt
atabus1 at satalink0 channel 0
satalink0: secondary channel wired to native-PCI mode
atabus2 at satalink0 channel 1
bce0 at pci2 dev 6 function 0: PCI configuration registers:
Common header:
0x00: 0x440114e4 0x08100006 0x02000001 0x00004000
Vendor Name: Broadcom Corporation (0x14e4)
Device Name: BCM4401 10/100 Ethernet (0x4401)
Command register: 0x0006
I/O space accesses: off
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0810
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: fast (0x0)
Slave signaled Target Abort: on
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x01
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x00
Type 0 ("normal" device) header:
0x10: 0xeb000000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xf3611297
0x30: 0x00000000 0x00000040 0x00000000 0x0000010a
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xeb000000, size: 0x00002000
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xf361
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x40
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0a
Capability register at 0x40
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0xffc20001 0x00004000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x18000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00001000 0xff002001 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
Broadcom Corporation BCM4401 10/100 Ethernet (ethernet network, revision 0x01) at ? dev 6 function 0 (tag 0x80023000, intrtag 0x8000a400, intrswiz 0x6, intrpin 0x3, i/o off, mem on, no quirks): Broadcom BCM4401 10/100 Ethernet
bce0: interrupting at ioapic0 pin 18 (irq 10)
ukphy0 at bce0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000818, model 0x0036, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bce0: Ethernet address 00:30:1b:b1:99:0e
VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus, interface 0x10, revision 0x80) at pci2 dev 11 function 0: PCI configuration registers:
Common header:
0x00: 0x30441106 0x02100007 0x0c001080 0x00004008
Vendor Name: VIA Technologies (0x1106)
Device Name: VT3606 OHCI IEEE 1394 Controller (0x3044)
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0210
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: medium (0x1)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: serial bus (0x0c)
Subclass Name: Firewire (0x00)
Interface: 0x10
Revision ID: 0x80
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x40
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xeb003000 0x0000a401 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x30441106
0x30: 0x00000000 0x00000050 0x00000000 0x20000103
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xeb003000, size: 0x00000800
Base address register at 0x14
type: 32-bit i/o
base: 0x0000a400, size: 0x00000080
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1106
Subsystem ID: 0x3044
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0x50
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x20
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x03
Capability register at 0x50
type: 0x01 (Power Management, rev. 1.0)
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0xe4020001 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
VIA Technologies VT3606 OHCI IEEE 1394 Controller (Firewire serial bus, interface 0x10, revision 0x80) at pci2 dev 11 function 0 (tag 0x80025800, intrtag 0x8000a400, intrswiz 0xb, intrpin 0x4, i/o on, mem on, no quirks) not configured
ATI Technologies product 0x4341 (audio multimedia) at pci0 dev 20 function 5: PCI configuration registers:
Common header:
0x00: 0x43411002 0x04200007 0x04010000 0x00804008
Vendor Name: ATI Technologies (0x1002)
Device ID: 0x4341
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Status register: 0x0420
Capability List support: off
66 MHz capable: on
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: slow (0x2)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: multimedia (0x04)
Subclass Name: audio (0x01)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x00+multifunction (0x80)
Latency Timer: 0x40
Cache Line Size: 0x08
Type 0 ("normal" device) header:
0x10: 0xec005000 0x00000000 0x00000000 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0xc0b01297
0x30: 0x00000000 0x00000000 0x00000000 0x0002020b
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xec005000, size: 0x00000100
Base address register at 0x14
not implemented(?)
Base address register at 0x18
not implemented(?)
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x1297
Subsystem ID: 0xc0b0
Expansion ROM Base Address: 0x00000000
Reserved @ 0x34: 0x00000000
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x02
Interrupt pin: 0x02 (pin B)
Interrupt line: 0x0b
Device-dependent header:
0x40: 0x00000000 0x00000000 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
Don't know how to pretty-print device-dependent header.
ATI Technologies product 0x4341 (audio multimedia) at pci0 dev 20 function 5 (tag 0x8000a500, intrtag 0x8000a500, intrswiz 0, intrpin 0x2, i/o on, mem on, no quirks) not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
raidattach: Asked for 8 units
Kernelized RAIDframe activated
ehci0: handing over low speed device on port 3 to ohci0
uhub2: port 3, device disappeared after reset
wd0 at atabus0 drive 0: <Maxtor 6Y080L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
Searching for RAID components...
Component on: wd0a: 160086465
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 234567 Mod Counter: 354
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1 blocksize: 512 numBlocks: 160086400
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
Found: wd0a at 0
RAID autoconfigure
Configuring raid0:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: wd0a at 0
Looking for 1 in autoconfig
raid0: allocating 20 buffers of 65536 bytes.
raid0: RAID Level 1
raid0: Components: /dev/wd0a component1[**FAILED**]
raid0: Total Sectors: 160086400 (78167 MB)
boot device: raid0
root on raid0a dumps on raid0b
mountroot: trying smbfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying nfs...
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Try to boot
>Fix:
Unknown
>Release-Note:
>Audit-Trail:
>Unformatted:
!DSPAM:40ddfa6774571903314480!