Subject: port-amd64/28052: Oct 31 2004 -current hangs on boot
To: None <gnats-bugs@gnats.NetBSD.org>
From: None <scotte@warped.com>
List: netbsd-bugs
Date: 11/06/2004 18:02:06
>Number: 28052
>Category: port-amd64
>Synopsis: October 31st sources cause kernel hang on boot
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: port-amd64-maintainer
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sat Nov 06 18:03:00 UTC 2004
>Closed-Date:
>Last-Modified:
>Originator: Scott Ellis
>Release: NetBSD 2.99.10 (October 31, 2004 sources)
>Organization:
>Environment:
System: NetBSD intrepid 2.99.10 NetBSD 2.99.10 (INTREPID.Athlon64_32) #0: Mon Nov 1 19:56:42 PST 2004 scotte@intrepid:/usr/src/sys/arch/i386/compile/INTREPID.Athlon64_32 i386
also
NetBSD 2.99.10 (GENERIC) #0: Sun Oct 31 18:07:59 PST 2004
scotte@intrepid:/misc/netbsd_src/src/sys/arch/amd64/compile/obj.amd64/GENERIC
Hardware is ASUS K8VSE Deluxe, 3ware RAID controller, serial console, 3c905
ethernet.
Architecture: amd64
Machine: amd64
>Description:
Booting an AMD64 kernel, either as part of the install floppies,
or off hd0a: causes the system to hang when before finding the boot
device/root device/etc. The HDD activity light for twe0 comes on
solid, but it's not clear if this is a hang, or actual disk activity.
This happens with AMD64 GENERIC, INSTALL, and a custom kernel tailored
after the working i386 kernel. Boot messages are attached for custom
AMD64, GENERIC AMD64, and custom i386.
Note that even though -a is passed to the boot loader, the system
hangs before prompting for the boot device.
> boot hd0a:netbsd.amd64 -av
booting hd0a:netbsd.amd64 (howto 0x20001)
2096776+298024+356432 [233688+145490]=0x3fc9e8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 2.99.10 (INTREPID.AMD64) #0: Mon Nov 1 20:03:11 PST 2004
scotte@intrepid:/misc/netbsd_src/src/sys/arch/amd64/compile/obj.amd64/INTREPID.AMD64
total memory = 1022 MB
avail memory = 977 MB
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 2800+, 1802.47 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
ioapic0: misconfigured as apic 2
ioapic0: remapped to apic 1
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,08000403>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc0: expected BUFFER, got 4
atppc0 at acpi0 (PNP0401-1): AT Parallel Port
atppc0: io 0x378-0x37f,0x778-0x77b irq 7 drq 3
atppc0: FIFO <depth,wthr,rthr>=<16,9,9>
atppc0: capabilities=3f<INTR,DMA,FIFO,PS2,ECP,EPP>
ppbus0 at atppc0
ppbus0: No IEEE1284 device found.
lpt0 at ppbus0: port mode = 1<COMPATIBLE>
PNP0C02 at acpi0 not configured
PNP0C02 at acpi0 not configured
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com: ns16550a, working fifo
com0: console
PNP0C01 at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x3188 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: memory space enabled
fwohci0 at pci0 dev 7 function 0: vendor 0x1106 product 0x3044 (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 16 (irq 5)
fwohci0: OHCI 1.0, 00:e0:18:00:00:86:c8:5b, 400Mb/s, 2048 max_rec, 4 ir_ctx, 8 it_ctx
skc0 at pci0 dev 10 function 0: ioapic0 pin 17 (irq 11)
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0 at skc0 port A: Ethernet address 00:11:2f:38:83:e7
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ex0 at pci0 dev 13 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at ioapic0 pin 18 (irq 10)
ex0: MAC address 00:10:5a:0f:35:6f
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
twe0 at pci0 dev 14 function 0: 3ware Escalade
twe0: interrupting at ioapic0 pin 19 (irq 3)
twe0: 4 ports, Firmware FE7S 1.05.00.065, BIOS BE7X 1.08.00.048
twe0: Monitor ME7X 1.01.00.038, PCB Rev5 , Achip 3.20 , Pchip 1.30-66
twe0: port 0: Maxtor 6Y250P0 239372 MB
twe0: port 1: Maxtor 6Y250P0 239372 MB
twe0: port 3: Maxtor 6Y250P0 239372 MB
ld0 at twe0 unit 0: 64K stripe RAID5, status: Normal
ld0: 467 GB, 61031 cyl, 255 head, 63 sec, 512 bytes/sect x 980465408 sectors
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 11) for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 10)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3227 (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 10)
auvia0: ac97: Analog Devices AD1980 codec; headphone, 20 bit DAC, no 3D stereo
auvia0: ac97: ext id 3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
audio0 at auvia0: full duplex, mmap, independent
pchb1 at pci0 dev 24 function 0
pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fw at fwohci0 not configured
-------------------------------------------------------------------------------
> boot hd0a:netbsd.amd64.generic -a
booting hd0a:netbsd.amd64.generic (howto 0x1)
5930520+640056+603272 [451800+274239]=0x889118
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 2.99.10 (GENERIC) #0: Sun Oct 31 18:07:59 PST 2004
scotte@intrepid:/misc/netbsd_src/src/sys/arch/amd64/compile/obj.amd64/GENERIC
total memory = 1022 MB
avail memory = 973 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (ASUSTeK DELUXE )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 2800+, 1802.47 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x3188 (rev. 0x01)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: memory space enabled
VIA Technologies VT3606 IEEE 1394 Host Controller (Firewire serial bus, interfac
e 0x10, revision 0x80) at pci0 dev 7 function 0 not configured
skc0 at pci0 dev 10 function 0: ioapic0 pin 17 (irq 11)
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0 at skc0 port A: Ethernet address 00:11:2f:38:83:e7
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ex0 at pci0 dev 13 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at ioapic0 pin 18 (irq 10)
ex0: MAC address 00:10:5a:0f:35:6f
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
twe0 at pci0 dev 14 function 0: 3ware Escalade
twe0: interrupting at ioapic0 pin 19 (irq 3)
twe0: 4 ports, Firmware FE7S 1.05.00.065, BIOS BE7X 1.08.00.048
ld0 at twe0 unit 0: 64K stripe RAID5, status: Normal
ld0: 467 GB, 61031 cyl, 255 head, 63 sec, 512 bytes/sect x 980465408 sectors
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 11) for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev.0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev.0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev.0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev.0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20, revision 0x86) at pci0 dev 16 function 4 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 10)
auvia0: ac97: Analog Devices AD1980 codec; headphone, 20 bit DAC, no 3D stereo
auvia0: ac97: ext id 3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
audio0 at auvia0: full duplex, mmap, independent
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
-------------------------------------------------------------------------------
> boot hd0a:netbsd.i386
booting hd0a:netbsd.i386
2328936+55124+244320 [159472+149239]=0x395a78
kenter: 0x00001000
acpi: wakecode is installed at 0x1000, size=336
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 2.99.10 (INTREPID.Athlon64_32) #0: Mon Nov 1 19:56:42 PST 2004
scotte@intrepid:/usr/src/sys/arch/i386/compile/INTREPID.Athlon64_32
total memory = 1022 MB
avail memory = 997 MB
BIOS32 rev. 0 found at 0xf0010
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Unknown K7 (Athlon) (686-class), 1802.47 MHz, id 0xf48
cpu0: features 78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 78bfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMX>
cpu0: features 78bfbff<FXSR,SSE,SSE2>
cpu0: "AMD Athlon(tm) 64 Processor 2800+"
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
ioapic0 at mainbus0 apid 1 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
ioapic0: misconfigured as apic 2
ioapic0: remapped to apic 1
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,08000403>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc0: expected BUFFER, got 4
atppc0 at acpi0 (PNP0401-1): AT Parallel Port
atppc0: io 0x378-0x37f,0x778-0x77b irq 7 drq 3
atppc0: FIFO <depth,wthr,rthr>=<16,9,9>
atppc0: capabilities=3f<INTR,DMA,FIFO,PS2,ECP,EPP>
ppbus0 at atppc0
ppbus0: No IEEE1284 device found.
lpt0 at ppbus0: port mode = 1<COMPATIBLE>
PNP0C02 at acpi0 not configured
PNP0C02 at acpi0 not configured
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com: ns16550a, working fifo
com0: console
PNP0C01 at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x3188 (rev. 0x01)
agp0 at pchb0: aperture at 0xfc000000, size 0xef00000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: memory space enabled
fwohci0 at pci0 dev 7 function 0: vendor 0x1106 product 0x3044 (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 16 (irq 5)
fwohci0: OHCI 1.0, 00:e0:18:00:00:86:c8:5b, 400Mb/s, 2048 max_rec, 4 ir_ctx, 8 it_ctx
skc0 at pci0 dev 10 function 0: ioapic0 pin 17 (irq 11)
skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
sk0 at skc0 port A: Ethernet address 00:11:2f:38:83:e7
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ex0 at pci0 dev 13 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex0: interrupting at ioapic0 pin 18 (irq 10)
ex0: MAC address 00:10:5a:0f:35:6f
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
twe0 at pci0 dev 14 function 0: 3ware Escalade
twe0: interrupting at ioapic0 pin 19 (irq 3)
twe0: 4 ports, Firmware FE7S 1.05.00.065, BIOS BE7X 1.08.00.048
ld0 at twe0 unit 0: 64K stripe RAID5, status: Normal
ld0: 467 GB, 61031 cyl, 255 head, 63 sec, 512 bytes/sect x 980465408 sectors
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 11) for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 10)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: single transaction translator
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3227 (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 10)
auvia0: ac97: Analog Devices AD1980 codec; headphone, 20 bit DAC, no 3D stereo
auvia0: ac97: ext id 3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
audio0 at auvia0: full duplex, mmap, independent
pchb1 at pci0 dev 24 function 0
pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fw at fwohci0 not configured
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
Sat Nov 6 09:50:34 PST 2004
...
>How-To-Repeat:
Boot -current kernel!
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted: