The following reply was made to PR kern/28997; it has been noted by GNATS.

From: "Dr. Gamut" <drgamut@gmail.com>
To: gnats-bugs@netbsd.org
Cc: 
Subject: Re: kern/28997
Date: Wed, 19 Jan 2005 05:05:38 -0500

 # dmesg
 
 NetBSD 2.99.14 (GENERIC) #0: Mon Jan 17 14:14:21 PST 2005
 	root@:/usr/obj/sys/arch/i386/compile/GENERIC
 total memory = 511 MB
 avail memory = 492 MB
 BIOS32 rev. 0 found at 0xfb3e0
 mainbus0 (root)
 cpu0 at mainbus0: (uniprocessor)
 cpu0: AMD Athlon XP 3200+ (686-class), 2205.16 MHz, id 0x6a0
 cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
 cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
 cpu0: "AMD Athlon(tm) XP 3200+"
 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu0: L2 cache 512 KB 64B/line 16-way
 cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
 cpu0: 8 page colors
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Nvidia nForce2 Host-PCI Bridge (rev. 0xc1)
 agp at pchb0 not configured
 Nvidia nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0
 dev 0 function 1 not configured
 Nvidia nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0
 dev 0 function 2 not configured
 Nvidia nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0
 dev 0 function 3 not configured
 Nvidia nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0
 dev 0 function 4 not configured
 Nvidia nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0
 dev 0 function 5 not configured
 pcib0 at pci0 dev 1 function 0
 pcib0: Nvidia nForce2 PCI-ISA bridge (rev. 0xa4)
 Nvidia nForce2 SMBus Controller (SMBus serial bus, revision 0xa2) at
 pci0 dev 1 function 1 not configured
 ohci0 at pci0 dev 2 function 0: Nvidia nForce2 USB Host Controller (rev. 0xa4)
 ohci0: interrupting at irq 12
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 3 ports with 3 removable, self powered
 ohci1 at pci0 dev 2 function 1: Nvidia nForce2 USB Host Controller (rev. 0xa4)
 ohci1: interrupting at irq 11
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 uhub1 at usb1
 uhub1: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 ehci0 at pci0 dev 2 function 2: Nvidia nForce2 USB2 Host Controller (rev. 0xa4)
 ehci0: interrupting at irq 9
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 4 ports each: ohci0 ohci1
 usb2 at ehci0: USB revision 2.0
 uhub2 at usb2
 uhub2: Nvidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: single transaction translator
 uhub2: 6 ports with 6 removable, self powered
 Nvidia nForce2 Ethernet (ethernet network, revision 0xa1) at pci0 dev
 4 function 0 not configured
 Nvidia nForce2 MCP-T Audio Processing Unit (audio multimedia, revision
 0xa2) at pci0 dev 5 function 0 not configured
 auich0 at pci0 dev 6 function 0: nForce2 MCP-T AC-97 Audio
 auich0: interrupting at irq 11
 auich0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
 auich0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
 ppb0 at pci0 dev 8 function 0: Nvidia nForce2 PCI-PCI bridge (rev. 0xa3)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 skc0 at pci1 dev 4 function 0: irq 5
 skc0: Marvell Yukon Lite Gigabit Ethernet rev. A3(0x7)
 sk0 at skc0 port A: Ethernet address 00:0e:a6:11:60:a3
 makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
 1000baseT-FDX, auto
 satalink0 at pci1 dev 11 function 0
 satalink0: Silicon Image SATALink 3112 (rev. 0x02)
 satalink0: SATALink BA5 register space disabled
 satalink0: bus-master DMA support present
 satalink0: primary channel wired to native-PCI mode
 satalink0: using irq 11 for native-PCI interrupt
 atabus0 at satalink0 channel 0
 satalink0: secondary channel wired to native-PCI mode
 atabus1 at satalink0 channel 1
 viaide0 at pci0 dev 9 function 0
 viaide0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to compatibility mode
 viaide0: primary channel interrupting at irq 14
 atabus2 at viaide0 channel 0
 viaide0: secondary channel configured to compatibility mode
 viaide0: secondary channel interrupting at irq 15
 atabus3 at viaide0 channel 1
 Nvidia nForce2 Firewire Controller (Firewire serial bus, interface
 0x10, revision 0xa3) at pci0 dev 13 function 0 not configured
 ppb1 at pci0 dev 30 function 0: Nvidia nForce2 PCI-PCI Bridge (rev. 0xc1)
 pci2 at ppb1 bus 3
 pci2: i/o space, memory space enabled
 vga1 at pci2 dev 0 function 0: Nvidia GeForce FX 5200 (rev. 0xa1)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff: using exception 16
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 isapnp0: no ISA Plug 'n Play devices found
 auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
 audio0 at auich0: full duplex, mmap, independent
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 Kernelized RAIDframe activated
 satalink0: port 0: device present, speed: 1.5Gb/s
 wd0 at atabus0 drive 0: <ST380013AS>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
 wd0(satalink0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
 atapibus0 at atabus2: 2 targets
 cd0 at atapibus0 drive 0: <CD-532E-A, , 2.0C> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2
 cd1 at atapibus0 drive 1: <SAMSUNG CD-R/RW DRIVE SW-248B, , R501>
 cdrom removable
 cd1: 32-bit data port
 cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(viaide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
 cd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 # ifconfig sk0
 
 sk0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
 	address: 00:0e:a6:11:60:a3
 	media: Ethernet autoselect
 	status: active