>Number:         29951
>Category:       kern
>Synopsis:       kernel freezes during the boot process at installation
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Apr 12 00:10:00 +0000 2005
>Originator:     Thomas Kopp
>Release:        2.0.2
>Organization:
>Environment:
Cant make an uname -a but it should be:
NetBSD iactorix 2.0.2 GENERIC amd64
>Description:
wsmux connecting to wsdisplay0
vendor 0x1002 product 0x4e68 (miscellaneous display) at pci1 dev 0 funtion 1
t configured <-- here is the output incomplete
vendor 0x11ab product 0x4320 (ethernet network, revision 0x13 at pci0 dev 10
nction 0 not configured <-- here is the output also incomplete
viaide0 at pci0 dev 15 function 0 
viaide0: VIA Technonlogies VT8237 SATA Controller (rev. 0x80)
viaide0: bus master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 10) for native-PCI mode
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1 
viaide1: VIA Technonlogies VT8237 ATA133 controller
viaide1: bus master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondaey channel inerrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev 0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 11)

you see the failure output above and the failure description follows now.

At first I hope you don't need the output above, because it's hiding in the history.
After the last message my PC freeze.
I've tried to disable all the onboard devices, turn off acpi/APIC and APM but nothing happens.
The SATA controller is also disabled because I don't have any devices on it. I've tried to enable it but nothing happens.
I don't know what to do, but I hope you can hel

>How-To-Repeat:

>Fix: