The following reply was made to PR kern/25462; it has been noted by GNATS.

From: "S.P.Zeidler" <spz@serpens.de>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: kern/25462
Date: Mon, 25 Apr 2005 16:30:53 +0200

 Hi,
 
 same box as Martin Mersberger reported about, but with a brand new kernel:
 ------------------- snap ------------------
 Using BOOTPARAMS protocol: ip address: 195.22.142.108, hostname: morepork
 root addr=195.22.142.104 path=/var/chroot/nfs/root
 loadfile: reading header
 elf64_exec: Booting /pci@1f,4000/network@1,1/netbsd
 3155768@0x1000000+129992@0x1800000+4064312@0x181fbc8 
 symbols @ 0xfef96540 243+265128+164344 start=0x1000000
 chain: calling OF_chain(800000, cac8, 1000000, fff83a80, 18)
 Loaded initial symtab at 0xfef96000, strtab at 0xfefd71e0, # entries 11029
 consinit()
 stdin node = f006227c
 stdout package = f006227c
 buffer @ 0x1c09d90
 console is /pci@1f,4000/ebus@1/se@14,400000:a
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
 	The Regents of the University of California.  All rights reserved.
 
 NetBSD 3.99.3 (AQUILA) #0: Fri Apr 22 17:03:26 CEST 2005
 	spz@aquila:/home/netbsd/obj.sparc64/sys/arch/sparc64/compile/AQUILA
 total memory = 1024 MB
 avail memory = 993 MB
 bootpath: /pci@1f,4000/network@1,1
 mainbus0 (root): SUNW,Ultra-80: hostid 80f7bd04
 cpu0 at mainbus0: SUNW,UltraSPARC-II @ 440.039 MHz, version 0 FPU
 cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 4096K external (64 b/l)
 cpu at mainbus0 not configured
 psycho0 at mainbus0 addr 0xfffb4000
 SUNW,psycho: impl 0, version 4: ign 7c0 bus range 0 to 0; PCI bus 0
 extent `psycho mem' (0x0 - 0x7fffffff), flags = 0x0
      0x0 - 0xfff
 extent `psycho io' (0x0 - 0xffff), flags = 0x0
      0x0 - 0x3ff
 decreasing interrupt retry timeout from fffff to 0xff
 DVMA map: fe000000 to ffffe000
 IOTSB: 10d6000 to 10de000
 pci0 at psycho0
 pci0: i/o space, memory space enabled
 ebus0 at pci0 dev 1 function 0
 ebus0: Sun Microsystems PCIO Ebus2, revision 0x01
 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003,
  72f000-72f003
 power at ebus0 addr 724000-724003 ipl 37 not configured
 SUNW,pll at ebus0 addr 504000-504002 not configured
 sc at ebus0 addr 500000-500007 not configured
 se at ebus0 addr 400000-40007f ipl 43 not configured
 com0 at ebus0 addr 3083f8-3083ff ipl 41: ns16550a, working fifo
 com1 at ebus0 addr 3062f8-3062ff ipl 42: ns16550a, working fifo
 lpt0 at ebus0 addr 3043bc-3043cb, 300398-300399, 700000-70000f ipl 34
 fdthree at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ipl 39
 not configured
 clock0 at ebus0 addr 0-1fff: mk48t59
 flashprom at ebus0 addr 0-fffff not configured
 SUNW,lom at ebus0 addr 200000-200063, 600000-600009 not configured
 hme0 at pci0 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1
 hme0: interrupting at ivec 3021
 hme0: Ethernet address 08:00:20:f7:bd:04
 ukphy0 at hme0 phy 1: Generic IEEE 802.3u media interface
 ukphy0: OUI 0x0006b8, model 0x000c, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 esiop0 at pci0 dev 3 function 0: Symbios Logic 53c875 (ultra-wide scsi)
 esiop0: using on-board RAM
 esiop0: interrupting at ivec 20
 esiop0: alloc new tag DSA table at PHY addr 0xfe066000
 scsibus0 at esiop0: 16 targets, 8 luns per target
 esiop1 at pci0 dev 3 function 1: Symbios Logic 53c875 (ultra-wide scsi)
 esiop1: using on-board RAM
 esiop1: interrupting at ivec 26
 esiop1: alloc new tag DSA table at PHY addr 0xfe068000
 scsibus1 at esiop1: 16 targets, 8 luns per target
 psycho1 at mainbus0 addr 0xfffc6000
 SUNW,psycho: impl 0, version 4: ign 7c0 bus range 128 to 128; PCI bus 128
 extent `psycho mem' (0x0 - 0x7fffffff), flags = 0x0
      0x0 - 0xfff
 extent `psycho io' (0x0 - 0xffff), flags = 0x0
      0x0 - 0x3ff
 pci1 at psycho1
 pci1: i/o space, memory space enabled
 timer0 at mainbus0 addr 0xfff9fc00 irq vectors 7ec and 7ed
 pcons0 at mainbus0
 raidattach: Asked for 8 units
 Kernelized RAIDframe activated
 IPsec: Initialized Security Association Processing.
 scsibus0: waiting 2 seconds for devices to settle...
 scsibus1: waiting 2 seconds for devices to settle...
 esiop0: alloc newcdb at PHY addr 0xfe06a000
 probe(esiop0:0:0:0): command timeout, CDB: 0x12 00 00 00 24 00
 [silence of the dead]
 ------------------- snap ------------------
 -- 
 spz@serpens.de (S.P.Zeidler)