It would helpful if you could look for some "axe0 at uhub0" messages
and show them.

	-- Lennart

xavier@tigerteam.se wrote:
>>Number:         30080
>>Category:       install
>>Synopsis:       floppy install problem with USB LinkSys Compact USB 2.0 10/100 Network Adapter (USB200M)
>>Confidential:   no
>>Severity:       serious
>>Priority:       high
>>Responsible:    install-manager
>>State:          open
>>Class:          support
>>Submitter-Id:   net
>>Arrival-Date:   Thu Apr 28 09:15:00 +0000 2005
>>Originator:     Xavier
>>Release:        NetBSD 2.0.2
>>Organization:
>>Environment:
>>Description:
> 
> System: 
> Dell Inspiron 3000
> Pentium 200mhz MMX CPU 200 MMX
> 64MB of RAM
> 4Gig drive
> 
> Tried version(s) of NetBSD: 
> NetBSD 2.0.2 to 1.5.3
> 
> The Dell Inspiron 3000 does not come with internal cd-rom/nic so I had to rely on the NetBSD floppy disks for installation. the floppy's were awesome, I was able to get into the setup screen and everything. the laptop itself recognized and powered up the USB nic(the lights lit up and my router accepted the new connection). Here is the screwy part -- once the NetBSD kernel loads into memory for setup it discovers and enables the USB device and even the nic itself but then the nic is then disabled. NetBSD sets the device name as uax0 and proceeds to setup. And with the device disabled I was unable to do any network installations. Unfortunately, since I have no CD-ROM and no network connectivity I had to bail on the setup. 
> 
> here is where I think the device itself is disabled:
> 
> uhci0 at pci0 dev 1 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
> uhci0: interupting at irq 10
> uhub0 at usb0
> uhub0: vender 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self-powered 
> vender: 0x8086 product (miscellaneous bridge, revision 0x01), at pci0 dev 1 (function 3 not configured)
> 
> right after that message pops up in dmesg the nic is disabled (lights turn off) and the kernel continues to load and install appears.
> 
> (replies: please attach me to any replies and/or fixes, I appreciate it thanks!)
> 
> 
> 
>>How-To-Repeat:
> 
> use floppy disk installation disks 1 (bootlap1.fs) and 2 (bootlap2.fs), and boot into install.
> 
>>Fix:
> 
>