On Jun 14, 10:43pm, christos@zoulas.com (christos@zoulas.com) wrote:
-- Subject: kern/30526: Nothing uses the second processor anymore.

And here is the MPACPI that does not:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California.  All rights reserved.

NetBSD 3.99.6 (TWOSIGMA) #5: Tue Jun 14 20:21:26 EDT 2005
christos@rebar.astron.com:/usr/src/sys/arch/i386/compile/TWOSIGMA
total memory = 3071 MB
avail memory = 3010 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: apid 0 (application processor)
cpu0: starting
cpu0: Intel Pentium III (686-class), 1263.52 MHz, id 0x6b1
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: "Intel(R) Pentium(R) III CPU family      1266MHz"
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (boot processor)
cpu1: Intel Pentium III (686-class), 1263.54 MHz, id 0x6b1
cpu1: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu1: features 383fbff<FXSR,SSE>
cpu1: "Intel(R) Pentium(R) III CPU family      1266MHz"
cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu1: L2 cache 512 KB 32B/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: calibrating local timer
cpu1: apic clock running at 132 MHz
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0
ioapic1: remapped to apic 3
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20050408
acpi0: X/RSDT: OemId <DELL  ,PE1650  ,00000001>, AslId <MSFT,0100000a>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker
spkr0 at pcppi1
sysbeep0 at pcppi1
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x5f irq 0
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
Jun 15 00:23:44 rebar last message repeated 4 times
pcppi1: attached to attimer0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI bridge (rev. 0x23)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI bridge (rev. 0x01)
pchb2 at pci0 dev 0 function 2
pchb2: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pci1 at pchb2 bus 1
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
wm0 at pci1 dev 2 function 0: Intel i82544EI 1000BASE-T Ethernet, rev. 2
wm0: interrupting at ioapic1 pin 1 (irq 7)
wm0: 64-bit 66MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:06:5b:0f:4c:77
makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci1 dev 4 function 0: Intel i82544EI 1000BASE-T Ethernet, rev. 2
wm1: interrupting at ioapic1 pin 0 (irq 5)
wm1: 64-bit 66MHz PCI bus
wm1: 64 word (6 address bits) MicroWire EEPROM
wm1: Ethernet address 00:06:5b:0f:4c:78
makphy1 at wm1 phy 1: Marvell 88E1000 Gigabit PHY, rev. 0
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ahc0 at pci1 dev 6 function 0: Adaptec aic7899 Ultra160 SCSI adapter
ahc0: interrupting at ioapic1 pin 2 (irq 3)
ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci1 dev 6 function 1: Adaptec aic7899 Ultra160 SCSI adapter
ahc1: interrupting at ioapic1 pin 3 (irq 7)
ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
pchb3 at pci0 dev 0 function 3
pchb3: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pci2 at pchb3 bus 2
pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vga0 at pci0 dev 12 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pchb4 at pci0 dev 15 function 0
pchb4: ServerWorks CSB5 southbridge (rev. 0x93)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks CSB5 IDE Controller (rev. 0x93)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks OSB4/CSB5 USB Host Controller (rev. 0x05)
ohci0: interrupting at ioapic0 pin 11 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks product 0x0000, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3
pcib0: ServerWorks CSB5 ISA/LPC bridge (rev. 0x00)
isa0 at pcib0
ioapic0: enabling
ioapic1: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
raidattach: Asked for 8 units
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <HITACHI, DK32DJ-72MC, D4D4> disk fixed
sd0: 70007 MB, 26866 cyl, 10 head, 533 sec, 512 bytes/sect x 143374650 sectors
sd0: sync (12.50ns offset 100), 16-bit (160.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <HITACHI, DK32DJ-72MC, D4D4> disk fixed
sd1: 70007 MB, 26866 cyl, 10 head, 533 sec, 512 bytes/sect x 143374650 sectors
sd1: sync (12.50ns offset 100), 16-bit (160.000MB/s) transfers, tagged queueing
sd2 at scsibus0 target 2 lun 0: <HITACHI, DK32DJ-72MC, D4D4> disk fixed
sd2: 70007 MB, 26866 cyl, 10 head, 533 sec, 512 bytes/sect x 143374650 sectors
sd2: sync (12.50ns offset 100), 16-bit (160.000MB/s) transfers, tagged queueing
ses0 at scsibus0 target 6 lun 0: <PE/PV, 1x3 SCSI BP, 0.26> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SN-124, , q009> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Searching for RAID components...
Component on: sd0a: 143374587
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 2005060201 Mod Counter: 112
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1  blocksize: 512 numBlocks: 143374464
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
Component on: sd1a: 143374587
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 2005060201 Mod Counter: 112
Clean: No Status: 0
sectPerSU: 128 SUsPerPU: 1 SUsPerRU: 1
RAID Level: 1  blocksize: 512 numBlocks: 143374464
Autoconfig: Yes
Contains root partition: Yes
Last configured as: raid0
Found: sd0a at 0
Found: sd1a at 1
RAID autoconfigure
Configuring raid0:
Starting autoconfiguration of RAID set...
Looking for 0 in autoconfig
Found: sd0a at 0
Looking for 1 in autoconfig
Found: sd1a at 1
raid0: allocating 20 buffers of 65536 bytes.
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd1a
raid0: Total Sectors: 143374464 (70007 MB)
boot device: raid0
root on raid0a dumps on raid0b
mountroot: trying lfs...
mountroot: trying ffs...
root file system type: ffs
cpu0: failed to start
init: copying out path `/sbin/init' 11