The following reply was made to PR xsrc/30731; it has been noted by GNATS.

From: jking@deadpixi.com
To: tron@netbsd.org
Cc: 
Subject: Re: xsrc/30731
Date: Tue, 12 Jul 2005 10:09:21 -0500 (CDT)

 > Synopsis: Certain keys inoperable under X
 >
 > State-Changed-From-To: open->feedback
 > State-Changed-By: tron@netbsd.org
 > State-Changed-When: Tue, 12 Jul 2005 06:53:46 +0000
 > State-Changed-Why:
 > What NetBSD version are you actually using? You specified 3.0_BETA as the
 > version but the kernel is from NetBSD-current. We also need information
 > about your hardware and your X11 configuration.
 >
 >
 >
 
 Hello,
   Sorry, that was my mistake on the NetBSD version. I was under the
 impression that 3.0_BETA was -current and -current would branch off
 after 3.0_RELEASE. I'm tracking current.
 
   Below is my dmesg output, for hardware information, and my XF86Config,
 for X11 information. Please let me know what else you might need.
 
   Rob
 
 
 dmesg:
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 3.99.7 (DUSTPUPPY) #1: Mon Jul 11 17:49:54 CDT 2005
 	root@dustpuppy.deadpixi.com:/usr/src/sys/arch/amd64/compile/DUSTPUPPY
 total memory = 511 MB
 avail memory = 489 MB
 userconf: configure system autoconfiguration:
 uc> disable ehci
 [  9] ehci* disabled
 uc> quit
 Continuing...
 mainbus0 (root)
 mainbus0: Intel MP Specification (Version 1.4) (UNIWILL  258KA       )
 cpu0 at mainbus0: apid 0 (boot processor)
 cpu0: Mobile AMD Athlon(tm) 64 Processor 3000+, 798.26 MHz
 cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
 cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu0: L2 cache 1 MB 64B/line 16-way
 cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully
 associative
 cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully
 associative
 cpu0: calibrating local timer
 cpu0: apic clock running at 199 MHz
 cpu0: 16 page colors
 mpbios: bus 0 is type PCI
 mpbios: bus 1 is type PCI
 mpbios: bus 2 is type ISA
 ioapic0 at mainbus0 apid 1 (I/O APIC)
 ioapic0: pa 0xfec00000, version 2, 24 pins
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x1039 product 0x0755 (rev. 0x01)
 ppb0 at pci0 dev 1 function 0: vendor 0x1039 product 0x0002 (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 0 function 0: vendor 0x1002 product 0x4e50 (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 pcib0 at pci0 dev 2 function 0
 pcib0: vendor 0x1039 product 0x0008 (rev. 0x25)
 siside0 at pci0 dev 2 function 5
 siside0: Silicon Integrated Systems 96X UDMA6755 IDE controller (rev. 0x00)
 siside0: bus-master DMA support present
 siside0: primary channel wired to compatibility mode
 siside0: primary channel interrupting at ioapic0 pin 14 (irq 14)
 atabus0 at siside0 channel 0
 siside0: secondary channel wired to compatibility mode
 siside0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 atabus1 at siside0 channel 1
 vendor 0x1039 product 0x7013 (modem communications, revision 0xa0) at pci0
 dev 2 function 6 not configured
 auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
 auich0: interrupting at ioapic0 pin 18 (irq 10)
 auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
 auich0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
 ohci0 at pci0 dev 3 function 0: vendor 0x1039 product 0x7001 (rev. 0x0f)
 ohci0: interrupting at ioapic0 pin 20 (irq 10)
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 3 ports with 3 removable, self powered
 ohci1 at pci0 dev 3 function 1: vendor 0x1039 product 0x7001 (rev. 0x0f)
 ohci1: interrupting at ioapic0 pin 21 (irq 3)
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 uhub1 at usb1
 uhub1: vendor 0x1039 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 vendor 0x1039 product 0x7002 (USB serial bus, interface 0x20) at pci0 dev
 3 function 3 not configured
 sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x91
 sip0: interrupting at ioapic0 pin 19 (irq 11)
 sip0: Ethernet address 00:03:0d:25:88:8d
 ukphy0 at sip0 phy 1: Generic IEEE 802.3u media interface
 ukphy0: OUI 0x000004, model 0x0020, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 vendor 0x104c product 0x8023 (Firewire serial bus, interface 0x10) at pci0
 dev 6 function 0 not configured
 vendor 0x1217 product 0x7114 (CardBus bridge, revision 0x20) at pci0 dev 9
 function 0 not configured
 vendor 0x1217 product 0x7114 (CardBus bridge, revision 0x20) at pci0 dev 9
 function 1 not configured
 vendor 0x1217 product 0x7110 (miscellaneous system) at pci0 dev 9 function
 2 not configured
 ath0 at pci0 dev 11 function 0
 ath0: interrupting at ioapic0 pin 19 (irq 11)
 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
 ath0: mac 5.9 phy 4.3 radio 3.6
 pchb1 at pci0 dev 24 function 0
 pchb1: vendor 0x1022 product 0x1100 (rev. 0x00)
 pchb2 at pci0 dev 24 function 1
 pchb2: vendor 0x1022 product 0x1101 (rev. 0x00)
 pchb3 at pci0 dev 24 function 2
 pchb3: vendor 0x1022 product 0x1102 (rev. 0x00)
 pchb4 at pci0 dev 24 function 3
 pchb4: vendor 0x1022 product 0x1103 (rev. 0x00)
 isa0 at pcib0
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pms0: Synaptics touchpad version 5.9
 pms0: Palm detect, Multi-finger
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 attimer0 at isa0 port 0x40-0x43: AT Timer
 ioapic0: enabling
 audio0 at auich0: full duplex, independent
 wd0 at atabus0 drive 0: <SAMSUNG MP0402H>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 38204 MB, 77622 cyl, 16 head, 63 sec, 512 bytes/sect x 78242976 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <Slimtype COMBO LSC-24082K, , JKU5> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 /etc/X11/XF86Config:
 Section "ServerLayout"
 	Identifier     "XFree86 Configured"
 	Screen      0  "Screen0" 0 0
 	InputDevice    "Mouse0" "CorePointer"
 	InputDevice    "Keyboard0" "CoreKeyboard"
 EndSection
 
 Section "Files"
 	RgbPath      "/usr/X11R6/lib/X11/rgb"
 	ModulePath   "/usr/X11R6/lib/modules"
 	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
 	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
 	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
 	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
 	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
 	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
 EndSection
 Section "Module"
 	Load  "extmod"
 	Load  "dbe"
 	Load  "glx"
 	Load  "record"
 	Load  "xtrap"
 	Load  "type1"
 	Load  "speedo"
 EndSection
 Section "InputDevice"
 	Identifier  "Keyboard0"
 	Driver      "kbd"
 	Option	    "Protocol" "wskbd"
 	Option	    "Device" "/dev/wskbd"
 EndSection
 
 Section "InputDevice"
 	Identifier  "Mouse0"
 	Driver      "mouse"
 	Option	    "Protocol" "wsmouse"
 	Option	    "Device" "/dev/wsmouse"
 EndSection
 
 Section "Monitor"
 	Identifier   "Monitor0"
 	VendorName   "Monitor Vendor"
 	ModelName    "Monitor Model"
 EndSection
 
 Section "Device"
 
         ### Available Driver options are:-
         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
         ### [arg]: arg optional
         #Option     "NoAccel"            	# [<bool>]
         #Option     "SWcursor"           	# [<bool>]
         #Option     "Dac6Bit"            	# [<bool>]
         #Option     "Dac8Bit"            	# [<bool>]
         #Option     "PanelOff"           	# [<bool>]
         #Option     "DDCMode"            	# [<bool>]
         #Option     "MonitorLayout"      	# [<str>]
         #Option     "IgnoreEDID"         	# [<bool>]
         #Option     "OverlayOnCRTC2"     	# [<bool>]
         #Option     "CloneMode"          	# [<str>]
         #Option     "CloneHSync"         	# [<str>]
         #Option     "CloneVRefresh"      	# [<str>]
         #Option     "UseFBDev"           	# [<bool>]
         #Option     "VideoKey"           	# <i>
         #Option     "DisplayPriority"    	# [<str>]
         #Option     "PanelSize"          	# [<str>]
         #Option     "ForceMinDotClock"   	# <freq>
 	Identifier  "Card0"
 	Driver      "ati"
 	VendorName  "ATI Technologies Inc"
 	BoardName   "RV350 [Mobility Radeon 9600 M10]"
 	BusID       "PCI:1:0:0"
 EndSection
 
 Section "Screen"
 	Identifier "Screen0"
 	Device     "Card0"
 	Monitor     "Monitor0"
 	DefaultDepth 24
 	SubSection "Display"
 		Viewport   0 0
 		Depth     1
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     4
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     8
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     15
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     16
 	EndSubSection
 	SubSection "Display"
 		Viewport   0 0
 		Depth     24
 		Modes	"1280x800"
 	EndSubSection
 EndSection