>Number:         32200
>Category:       kern
>Synopsis:       GENERIC.MPACPI => no PS/2 keyboad, Dell Precision 380
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Nov 30 17:14:00 +0000 2005
>Originator:     Scott Presnell
>Release:        NetBSD 3.0_RC4
>Organization:
Self
>Environment:

System: NetBSD low.tworoads.net 3.0_RC4 NetBSD 3.0_RC4 (ARAGON.MPACPI) #1: Tue Nov 29 18:55:10 PST 2005 root@low.tworoads.net:/usr/src/sys/arch/i386/compile/ARAGON.MPACPI i386
Architecture: i386
Machine: i386

>Description:

When building a GENERIC.MPACPI kernel, the ACPI based pckb (PS/2)
attachment does not yeild a functioning port. Both the keyboard and mouse
are unresponsive after boot.  Tried booting with keyboard unplugged (after
POST) attaching after boot, tried also repeated unplug and plugging in.

ehci is not configured for attachment in this kernel.

There is one BIOS control to turn off legacy PS/2 mouse support, but doing
that disabled the PS/2 mouse via isa attachment.

== dmesg ==

NetBSD 3.0_RC4 (ARAGON.MPACPI) #1: Tue Nov 29 18:55:10 PST 2005 root@low.tworoads.net:/usr/src/sys/arch/i386/compile/ARAGON.MPACPI i386

total memory = 2046 MB
avail memory = 1994 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel (686-class), 2992.71 MHz, id 0xf41
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 641d<SSE3,MONITOR,DS-CPL,CID,xTPR>
cpu0: features3 20100000<EM64T>
cpu0: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu0: I-cache 12K uOp cache 8-way
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 32 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel (686-class), 2992.51 MHz, id 0xf41
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 641d<SSE3,MONITOR,DS-CPL,CID,xTPR>
cpu1: features3 20100000<EM64T>
cpu1: "Intel(R) Pentium(R) 4 CPU 3.00GHz"
cpu1: I-cache 12K uOp cache 8-way
cpu1: L2 cache 1 MB 64B/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: using thermal monitor 1
ioapic0 at mainbus0 apid 8 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 8
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <DELL  , WS 380 ,00000006>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
fdc0 at acpi0 (PNP0700)
fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
lpt0 at acpi0 (PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77f irq 7
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x2774 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: Intel product 0x2775 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: Nvidia product 0x0165 (rev. 0xa1)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16 (irq 11)
azalia0: host: 82801GB/GR High Definition Audio Controller (rev. 1)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: Intel 82801GB/GR PCI Express Port #5 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 5: Intel 82801GB/GR PCI Express Port #6 (rev. 0x01)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci4 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 17 (irq 10)
bge0: ASIC BCM5750 A1 (0x4001), Ethernet address 00:12:3f:72:25:5d
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FD
X, auto
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01
)
uhci0: interrupting at ioapic0 pin 21 (irq 9)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01
)
uhci1: interrupting at ioapic0 pin 22 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01
)
uhci2: interrupting at ioapic0 pin 18 (irq 3)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01
)
uhci3: interrupting at ioapic0 pin 23 (irq 10)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
Intel 82801GB/GR USB EHCI Controller (USB serial bus, interface 0x20, revision 0
x01) at pci0 dev 29 function 7 not configured
ppb4 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xe1)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GB/GR LPC Interface Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2
piixide1: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 20 (irq 5) for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev
31 function 3 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
azalia0: codec: 0x8384/0x7690 (rev. 34.1)
azalia0: codec: High Definition Audio rev. 1.0
azalia0: playback: encodings=1<PCM>
azalia0: playback: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.
2kHz,48kHz,44.1kHz>
azalia0: playback: max channels=2
azalia0: recording: encodings=1<PCM>
azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88
.2kHz,48kHz,44.1kHz>
azalia0: recording: max channels=2
audio0 at azalia0: full duplex, independent
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <Memorex DVD16+/-DL4RWlD2, , JWS5> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd1 at atapibus0 drive 1: <TSSTcorpCD-RW   TS-H292B, , DE03> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd0 at atabus1 drive 0: <WDC WD800JD-75LSA0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus1 drive 1: <Maxtor 6L200S0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 189 GB, 395136 cyl, 16 head, 63 sec, 512 bytes/sect x 398297088 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
cpu1: CPU 1 running
bge0: block failed to stop: reg 0x1400, bit 0x00000002
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Dell Dell USB Keyboard, rev 1.10/2.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
pckbport: command timeout
pckbport: command timeout
pckbport: command timeout

>How-To-Repeat:

Build GENERIC.MPACPI kernel; boot; PS/2 keyboard and mouse do not work.

>Fix:

Use isa based pckb attachment.