Subject: Re: port-sparc64/30343
To: None <martin@netbsd.org, gnats-admin@netbsd.org,>
From: Matthias Scheler <tron@zhadum.de>
List: netbsd-bugs
Date: 12/06/2005 22:50:02
The following reply was made to PR port-sparc64/30343; it has been noted by GNATS.
From: Matthias Scheler <tron@zhadum.de>
To: NetBSD GNATS <gnats-bugs@netbsd.org>
Cc:
Subject: Re: port-sparc64/30343
Date: Tue, 6 Dec 2005 22:48:37 +0000
On Wed, Jun 15, 2005 at 02:21:56PM +0000, tron@netbsd.org wrote:
> Synopsis: NetBSD-sparc64 seems to have trouble initializing PCI interrupts
>
> State-Changed-From-To: feedback->open
> State-Changed-By: tron@netbsd.org
> State-Changed-When: Wed, 15 Jun 2005 14:21:56 +0000
> State-Changed-Why:
> The requested information was provided.
Here is another attempt to provide the correct OFW output which
Martin Husemann request:
{0} ok dev /pci@1f,2000/ethernet@1
{0} ok .properties
assigned-addresses 83800810 00000000 00100000 00000000 00010000
power-consumption 00000000 007270e0
reg 00800800 00000000 00000000 00000000 00000000
03800810 00000000 00000000 00000000 00010000
compatible 70 63 69 31 34 65 34 2c 31 36 34 35 2e 31 30 62
name ethernet
66mhz-capable
fast-back-to-back
devsel-speed 00000001
class-code 00020000
interrupts 00000001
max-latency 00000000
min-grant 00000040
subsystem-vendor-id 000010b7
subsystem-id 00001006
revision-id 00000015
device-id 00001645
vendor-id 000014e4
{0} ok dev ..
{0} ok .properties
available 82800000 00000000 00110000 00000000
7fef0000 81800000 00000000 00001000
00000000 0000f000 00006176 61696c61
bus-range 00000080
00000080
scsi-initiator-id 00000007
clock-frequency 03ef1480
version# 00 00 00 04
implementation# 00 00 00 00
address fffc6000
fffc4000
fffb6000
interrupt-map 00800800 00000000 00000000 00000001 f005fd74 00000000
00800800 00000000 00000000 00000002 f005fd74 00000001
00800800 00000000 00000000 00000003 f005fd74 00000002
00800800 00000000 00000000 00000004 f005fd74 00000003
interrupt-map-mask 00fff800 00000000 00000000 00000007
#interrupt-cells 00000001
slot-names 00 00 00 02 50 43 49 36 36 20 31 00
no-probe-list 0
upa-portid 0000001f
66mhz-capable
interrupts 000007f0
000007ee
000007ef
000007e5
000007e8
000007f2
ranges 00800000 00000000 00000000 000001fe 01000000 00000000 00800000
01000000 00000000 00000000 000001fe 02000000 00000000 00010000
02000000 00000000 00000000 000001ff 00000000 00000000 80000000
03000000 00000000 00000000 000001ff 00000000 00000000 80000000
reg 000001fe 00002000 00000000 00002000
000001fe 01800000 00000000 00000100
000001fe 00000000 00000000 0000d000
bus-parity-generated
#size-cells 00000002
#address-cells 00000003
device_type pci
name pci
model SUNW,psycho
compatible 70 63 69 31 30 38 65 2c 38 30 30 30 00 70 63 69
thermal-interrupt
{0} ok dev ..
{0} ok .properties
energystar-v2
idprom 01 80 08 00 20 a9 29 ed 00 00 00 00 a9 29 ed a9
reset-reason S-POR
interrupt-map 0000003c 00000000 00000000 f005fd74 80000033
0000003a 00000000 00000000 f005fd74 80000034
interrupt-map-mask 0000003e 00000000 00000000
#interrupt-cells 00000001
#address-cells 00000002
breakpoint-trap 0000007f
#size-cells 00000002
model SUNW,501-4450
name SUNW,Ultra-60
clock-frequency 06b4b157
banner-name Sun Ultra 60 UPA/PCI (2 X UltraSPARC-II 450MHz)
device_type upa
I hope it's fine this time.
Kind regards
--
Matthias Scheler http://scheler.de/~matthias/