The following reply was made to PR kern/32520; it has been noted by GNATS.

From: Reinoud Zandijk <reinoud@netbsd.org>
To: gnats-bugs@netbsd.org
Cc: 
Subject: Re: kern/32520: USB uhci->ohci transfer fails on startup
Date: Sat, 14 Jan 2006 15:37:07 +0100

 Forgot the dmesg :-S
 
 (sorry for the splitup/double dmesg)
 
  Play motherboard register resources] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 com0 at acpi0 (PNP0501-1)
 com0: io 0x3f8-0x3ff irq 4
 com0: ns16550a, working fifo
 pckbc0 at acpi0 (PNP0F03): aux port
 pckbc0: irq 12
 pckbc1 at acpi0 (PNP0303): kbd port
 pckbc1: io 0x60,0x64 irq 1
 PNP0C01 [System Board] at acpi0 not configured
 acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 pcppi1: attached to attimer1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: ATI Technologies RS300 Host Bridge (rev. 0x02)
 agp at pchb0 not configured
 ppb0 at pci0 dev 1 function 0: ATI Technologies RS300 AGP Interface (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 5 function 0: ATI Technologies Radeon 9100 IGP (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 ohci0 at pci0 dev 19 function 0: ATI Technologies SB200 USB Host Controller (rev. 0x01)
 ohci0: interrupting at ioapic0 pin 19 (irq 10)
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 3 ports with 3 removable, self powered
 ohci1 at pci0 dev 19 function 1: ATI Technologies SB200 USB Host Controller (rev. 0x01)
 ohci1: interrupting at ioapic0 pin 19 (irq 10)
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 uhub1 at usb1
 uhub1: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 ehci0 at pci0 dev 19 function 2: ATI Technologies SB200 USB2 Host Controller (rev. 0x01)
 ehci0: interrupting at ioapic0 pin 19 (irq 10)
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 3 ports each: ohci0 ohci1
 usb2 at ehci0: USB revision 2.0
 uhub2 at usb2
 uhub2: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 6 ports with 6 removable, self powered
 ATI Technologies SB200 SMBus Controller (SMBus serial bus, revision 0x18) at pci0 dev 20 function 0 not configured
 ixpide0 at pci0 dev 20 function 1
 ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
 ixpide0: bus-master DMA support present
 ixpide0: primary channel configured to compatibility mode
 ixpide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
 atabus0 at ixpide0 channel 0
 ixpide0: secondary channel configured to compatibility mode
 ixpide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 atabus1 at ixpide0 channel 1
 pcib0 at pci0 dev 20 function 3
 pcib0: ATI Technologies SB200 PCI-ISA Bridge (rev. 0x00)
 ppb1 at pci0 dev 20 function 4: ATI Technologies SB200 PCI-PCI Bridge (rev. 0x00)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 ex0 at pci2 dev 8 function 0: 3Com 3c920B-EMB-WNM Integrated Fast Ethernet (rev. 0x40)
 ex0: interrupting at ioapic0 pin 18 (irq 3)
 ex0: MAC address 00:11:2f:52:44:7c
 ukphy0 at ex0 phy 1: Generic IEEE 802.3u media interface
 ukphy0: RTL8201L 10/100 media interface (OUI 0x000004, model 0x0020), rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 fwohci0 at pci2 dev 10 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x80)
 fwohci0: interrupting at ioapic0 pin 18 (irq 3)
 fwohci0: OHCI version 1.10 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:e0:18:00:00:8c:83:d8
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 cbb0 at pci2 dev 12 function 0: ENE Technology CB710 CardBus Controller (rev. 0x02)
 cbb0: using ioapic for interrupt
 ENE Technology MCR510 PCI Memory Card Reader Controller (flash memory) at pci2 dev 12 function 1 not configured
 cbb0: interrupting at ioapic0 pin 16 (irq 255)
 cardslot0 at cbb0 slot 0 flags 0
 cardbus0 at cardslot0: bus 3
 pcmcia0 at cardslot0
 auixp0 at pci0 dev 20 function 5: ATI Technologies IXP AC'97 Audio Controller (rev. 0x00)
 auixp0: interrupting at ioapic0 pin 17 (irq 5)
 auixp0: soft resetting aclink
 isa0 at pcib0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 isapnp0: no ISA Plug 'n Play devices found
 ioapic0: enabling
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 ieee1394if0: bus manager 0 (me)
 auixp0: ac97: Analog Devices AD1888 codec; headphone, 20 bit DAC, no 3D stereo
 auixp0: ac97: ext id 3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
 audio0 at auixp0: full duplex, mmap, independent
 raidattach: Asked for 8 units
 Kernelized RAIDframe activated
 atapibus0 at atabus0: 2 targets
 cd0 at atapibus0 drive 0: <_NEC DVD_RW ND-3500AG, , 2.16> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 wd0 at atabus0 drive 1: <WDC WD1200JB-00EVA0>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 cd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 wd0(ixpide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 ehci0: handing over low speed device on port 1 to ohci0
 uhub2: port 1, device disappeared after reset
 Searching for RAID components...
 boot device: wd0
 root on wd0a dumps on wd0b
 mountroot: trying lfs...
 mountroot: trying ffs...
 root file system type: ffs
 cpu1: CPU 1 running
 init: copying out path `/sbin/init' 11
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 ntfs_mount(): MNT_UPDATE not supported
 ehci0: handing over low speed device on port 1 to ohci0
 uhub2: port 1, device disappeared after reset
 uhidev0 at uhub0 port 1 configuration 1 interface 0
 uhidev0: Tsunami product 0x1203, rev 2.00/2.30, addr 2, iclass 3/1
 ukbd0 at uhidev0: 8 modifier keys, 6 key codes
 wskbd1 at ukbd0 mux 1
 wskbd1: connecting to wsdisplay0
 uhidev1 at uhub0 port 1 configuration 1 interface 1
 uhidev1: Tsunami product 0x1203, rev 2.00/2.30, addr 2, iclass 3/0
 uhidev1: 2 report ids
 uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
 uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
 syncing disks... done
 unmounting file systems...
 unmounting /var/mail (rangerover.kasbah:/var/mail)...
 unmounting /home (rangerover.kasbah:/home)...
 unmounting /usr/pkg/emul/linux/proc (procfs)...
 unmounting /kern (kernfs)...
 unmounting /win2000 (/dev/wd0e)...
 unmounting / (/dev/wd0a)...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 3.99.15 (GENERIC.MPACPI) #1: Sat Jan 14 14:19:58 CET 2006
 	imago@heethoofdje.kasbah:/usr/sources/cvs.netbsd.org/src/sys/arch/i386/compile/GENERIC.MPACPI
 total memory = 478 MB
 avail memory = 461 MB
 BIOS32 rev. 0 found at 0xf0010
 mainbus0 (root)
 cpu0 at mainbus0: apid 0 (boot processor)
 cpu0: Intel (686-class), 3192.69 MHz, id 0xf33
 cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
 cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
 cpu0: features2 41d<SSE3,MONITOR,DS-CPL,CID>
 cpu0: "Intel(R) Pentium(R) 4 CPU 3.20GHz"
 cpu0: I-cache 12K uOp cache 8-way
 cpu0: L2 cache 1 MB 64B/line 8-way
 cpu0: ITLB 4K/4M: 64 entries
 cpu0: DTLB 4K/4M: 64 entries
 cpu0: using thermal monitor 1
 cpu0: calibrating local timer
 cpu0: apic clock running at 199 MHz
 cpu0: 32 page colors
 cpu1 at mainbus0: apid 1 (application processor)
 cpu1: starting
 cpu1: Intel (686-class), 3192.55 MHz, id 0xf33
 cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
 cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
 cpu1: features2 41d<SSE3,MONITOR,DS-CPL,CID>
 cpu1: "Intel(R) Pentium(R) 4 CPU 3.20GHz"
 cpu1: I-cache 12K uOp cache 8-way
 cpu1: L2 cache 1 MB 64B/line 8-way
 cpu1: ITLB 4K/4M: 64 entries
 cpu1: DTLB 4K/4M: 64 entries
 cpu1: using thermal monitor 1
 ioapic0 at mainbus0 apid 2 (I/O APIC)
 ioapic0: pa 0xfec00000, version 11, 24 pins
 ioapic0: misconfigured as apic 0
 ioapic0: remapped to apic 2
 acpi0 at mainbus0
 acpi0: using Intel ACPI CA subsystem version 20050408
 acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,10000422>, AslId <MSFT,00000097>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 PNP0A03 [PCI Bus] at acpi0 not configured
 PNP0000 [AT Interrupt Controller] at acpi0 not configured
 PNP0200 [AT DMA Controller] at acpi0 not configured
 attimer1 at acpi0 (PNP0100): AT Timer
 attimer1: io 0x40-0x43 irq 0
 PNP0B00 [AT Real-Time Clock] at acpi0 not configured
 pcppi1 at acpi0 (PNP0800)
 pcppi1: io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 npx0 at acpi0 (PNP0C04)
 npx0: io 0xf0-0xff irq 13
 npx0: using exception 16
 lpt0 at acpi0 (PNP0401)
 lpt0: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 com0 at acpi0 (PNP0501-1)
 com0: io 0x3f8-0x3ff irq 4
 com0: ns16550a, working fifo
 pckbc0 at acpi0 (PNP0F03): aux port
 pckbc0: irq 12
 pckbc1 at acpi0 (PNP0303): kbd port
 pckbc1: io 0x60,0x64 irq 1
 PNP0C01 [System Board] at acpi0 not configured
 acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 pcppi1: attached to attimer1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: ATI Technologies RS300 Host Bridge (rev. 0x02)
 agp at pchb0 not configured
 ppb0 at pci0 dev 1 function 0: ATI Technologies RS300 AGP Interface (rev. 0x00)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 5 function 0: ATI Technologies Radeon 9100 IGP (rev. 0x00)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 ohci0 at pci0 dev 19 function 0: ATI Technologies SB200 USB Host Controller (rev. 0x01)
 ohci0: interrupting at ioapic0 pin 19 (irq 10)
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 3 ports with 3 removable, self powered
 ohci1 at pci0 dev 19 function 1: ATI Technologies SB200 USB Host Controller (rev. 0x01)
 ohci1: interrupting at ioapic0 pin 19 (irq 10)
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 uhub1 at usb1
 uhub1: ATI Technologie OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 ehci0 at pci0 dev 19 function 2: ATI Technologies SB200 USB2 Host Controller (rev. 0x01)
 ehci0: interrupting at ioapic0 pin 19 (irq 10)
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 3 ports each: ohci0 ohci1
 usb2 at ehci0: USB revision 2.0
 uhub2 at usb2
 uhub2: ATI Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 6 ports with 6 removable, self powered
 ATI Technologies SB200 SMBus Controller (SMBus serial bus, revision 0x18) at pci0 dev 20 function 0 not configured
 ixpide0 at pci0 dev 20 function 1
 ixpide0: ATI Technologies IXP IDE Controller (rev. 0x00)
 ixpide0: bus-master DMA support present
 ixpide0: primary channel configured to compatibility mode
 ixpide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
 atabus0 at ixpide0 channel 0
 ixpide0: secondary channel configured to compatibility mode
 ixpide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
 atabus1 at ixpide0 channel 1
 pcib0 at pci0 dev 20 function 3
 pcib0: ATI Technologies SB200 PCI-ISA Bridge (rev. 0x00)
 ppb1 at pci0 dev 20 function 4: ATI Technologies SB200 PCI-PCI Bridge (rev. 0x00)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 ex0 at pci2 dev 8 function 0: 3Com 3c920B-EMB-WNM Integrated Fast Ethernet (rev. 0x40)
 ex0: interrupting at ioapic0 pin 18 (irq 3)
 ex0: MAC address 00:11:2f:52:44:7c
 ukphy0 at ex0 phy 1: Generic IEEE 802.3u media interface
 ukphy0: RTL8201L 10/100 media interface (OUI 0x000004, model 0x0020), rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 fwohci0 at pci2 dev 10 function 0: VIA Technologies VT6306 IEEE 1394 Host Controller (rev. 0x80)
 fwohci0: interrupting at ioapic0 pin 18 (irq 3)
 fwohci0: OHCI version 1.10 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:e0:18:00:00:8c:83:d8
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 cbb0 at pci2 dev 12 function 0: ENE Technology CB710 CardBus Controller (rev. 0x02)
 cbb0: using ioapic for interrupt
 ENE Technology MCR510 PCI Memory Card Reader Controller (flash memory) at pci2 dev 12 function 1 not configured
 cbb0: interrupting at ioapic0 pin 16 (irq 255)
 cardslot0 at cbb0 slot 0 flags 0
 cardbus0 at cardslot0: bus 3
 pcmcia0 at cardslot0
 auixp0 at pci0 dev 20 function 5: ATI Technologies IXP AC'97 Audio Controller (rev. 0x00)
 auixp0: interrupting at ioapic0 pin 17 (irq 5)
 auixp0: soft resetting aclink
 isa0 at pcib0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 isapnp0: no ISA Plug 'n Play devices found
 ioapic0: enabling
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 ieee1394if0: bus manager 0 (me)
 auixp0: ac97: Analog Devices AD1888 codec; headphone, 20 bit DAC, no 3D stereo
 auixp0: ac97: ext id 3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
 audio0 at auixp0: full duplex, mmap, independent
 raidattach: Asked for 8 units
 Kernelized RAIDframe activated
 atapibus0 at atabus0: 2 targets
 cd0 at atapibus0 drive 0: <_NEC DVD_RW ND-3500AG, , 2.16> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 wd0 at atabus0 drive 1: <WDC WD1200JB-00EVA0>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 cd0(ixpide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 wd0(ixpide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 ehci0: handing over low speed device on port 1 to ohci0
 uhub2: port 1, device disappeared after reset
 Searching for RAID components...
 boot device: wd0
 root on wd0a dumps on wd0b
 mountroot: trying lfs...
 mountroot: trying ffs...
 root file system type: ffs
 cpu1: CPU 1 running
 init: copying out path `/sbin/init' 11
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)