The following reply was made to PR kern/32690; it has been noted by GNATS.

From: Leonardo Amaral <leleobhz@rootshell.be>
To: Martin Husemann <martin@duskware.de>
Cc: gnats-bugs@NetBSD.org
Subject: Re: kern/32690: Cant make DWL-G510 work with ath driver
Date: Thu, 2 Feb 2006 00:35:56 +0100

 --ReaqsoxgOBHFXBhH
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline
 Content-Transfer-Encoding: quoted-printable
 
 * Martin Husemann (martin@duskware.de) wroten:
 > On Wed, Feb 01, 2006 at 02:45:00PM +0000, leleobhz@rootshell.be wrote:
 >=20
 > > but dmesg say it isnt configured
 >
 > Please quote this part of dmesg verbatim (with a few lines of context on
 > both sides, just to be sure).
 >=20
 > Martin
 
 Here is it:
 
 NetBSD  3.0 NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005  builds@w=
 orks.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/200512182024Z-obj/h=
 ome/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC i386
 
 
 NetBSD 3.0 (GENERIC) #0: Mon Dec 19 01:04:02 UTC 2005
 	builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/i386/2005121820=
 24Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/i386/compile/GENERIC
 total memory =3D 127 MB
 avail memory =3D 116 MB
 BIOS32 rev. 0 found at 0xfdaf0
 mainbus0 (root)
 cpu0 at mainbus0: (uniprocessor)
 cpu0: Intel Pentium/MMX (586-class), 166.28 MHz, id 0x543
 cpu0: features 8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
 cpu0: features 8001bf<MMX>
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Acer Labs M1531 Host-PCI Bridge (rev. 0xb3)
 pcib0 at pci0 dev 2 function 0
 pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0xb4)
 vga1 at pci0 dev 4 function 0: Cirrus Logic CL-GD5434-8 (rev. 0xf9)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 ex0 at pci0 dev 5 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
 ex0: interrupting at irq 9
 ex0: MAC address 00:60:08:c5:b8:d3
 nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 Atheros Communications product 0x001a (ethernet network, revision 0x01) at =
 pci0 dev 6 function 0 not configured
 aceride0 at pci0 dev 11 function 0
 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0x20)
 aceride0: bus-master DMA support present
 aceride0: primary channel configured to compatibility mode
 aceride0: primary channel interrupting at irq 14
 atabus0 at aceride0 channel 0
 aceride0: secondary channel configured to compatibility mode
 aceride0: secondary channel interrupting at irq 15
 atabus1 at aceride0 channel 1
 ohci0 at pci0 dev 15 function 0: Acer Labs M5237 USB 1.1 Host Controller (r=
 ev. 0x03)
 ohci0: interrupting at irq 11
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff: using exception 16
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 isapnp0: read port 0x203
 isapnp0: <SupraExpress 336i PnP Modem, SUP1311, SUP1310, > port 0x3e8/8 irq=
  4 not configured
 fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
 fd1 at fdc0 drive 1: 1.2MB, 80 cyl, 2 head, 15 sec
 Kernelized RAIDframe activated
 umass0 at uhub0 port 2 configuration 1 interface 0
 umass0: Generic USB Storage Device, rev 1.10/1.00, addr 2
 umass0: using SCSI over Bulk-Only
 scsibus0 at umass0: 2 targets, 4 luns per target
 sd0 at scsibus0 target 0 lun 0: <IC, USB Storage-CFC, 301b> disk removable
 sd0: fabricating a geometry
 sd0: 122 MB, 122 cyl, 64 head, 32 sec, 512 bytes/sect x 250368 sectors
 sd1 at scsibus0 target 0 lun 1: <IC, USB Storage-SMC, 301b> disk removable
 sd1: drive offline
 sd2 at scsibus0 target 0 lun 2: <IC, USB Storage-MMC, 301b> disk removable
 sd2: drive offline
 sd3 at scsibus0 target 0 lun 3: <IC, USB Storage-MSC, 301b> disk removable
 sd3: drive offline
 wd0 at atabus0 drive 0: <SAMSUNG SP8004H>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 76351 MB, 155127 cyl, 16 head, 63 sec, 512 bytes/sect x 156368016 sect=
 ors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <HITACHI CDR-7930, , 1022> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 3, DMA mode 1
 cd0(aceride0:1:0): using PIO mode 3, DMA mode 1 (using DMA)
 sd0: fabricating a geometry
 sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd0: fabricating a geometry
 sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd0: fabricating a geometry
 sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd0: fabricating a geometry
 sd1(umass0:0:0:1):  Check Condition on CDB: 0x00 20 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd2(umass0:0:0:2):  Check Condition on CDB: 0x00 40 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd3(umass0:0:0:3):  Check Condition on CDB: 0x00 60 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 sd0: fabricating a geometry
 
 
 --ReaqsoxgOBHFXBhH
 Content-Type: application/pgp-signature
 Content-Disposition: inline
 
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.2.1 (GNU/Linux)
 
 iD8DBQFD4UXa5Wqu+MetwJ4RAg4oAJ0dOfiTPPWStoHiQbILav8h/rnqMgCgwEyp
 FMg0xXicRiCWus25IpFfHVo=
 =ssvc
 -----END PGP SIGNATURE-----
 
 --ReaqsoxgOBHFXBhH--