netbsd-bugs: kern/33047: fxp NICs are not useable on IBM Netfinity 4000R (no link)

Subject: kern/33047: fxp NICs are not useable on IBM Netfinity 4000R (no link)
To: None <kern-bug-people@netbsd.org, gnats-admin@netbsd.org,>
From: None <timo.schoeler@riscworks.net>
List: netbsd-bugs
Date: 03/10/2006 08:45:00
>Number:         33047
>Category:       kern
>Synopsis:       fxp NICs are not useable on IBM Netfinity 4000R (no link)
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Fri Mar 10 08:45:00 +0000 2006
>Originator:     Timo Schoeler
>Release:        NetBSD 3.0-STABLE
>Organization:
RISCworks
>Environment:
NetBSD netbsd.riscworks.net 3.0_STABLE NetBSD 3.0_STABLE (GENERIC.MP) #0: Sun Jan 29 18:31:53 CET 2006  root@deneb.ts39-bln.riscworks.net:/usr/obj/sys/arch/i386/compile/GENERIC.MP i386
>Description:
unfortunately, i discovered that when trying fetch the install sets from ftp a device timeout for the ethernet interface occurs. even worse: the switch (managed Nortel 450; also tried with Cisco 1924) says 'no link', as does the LEDs on the machines back.

i gave Fedora Core 4 a shot, and it runs fine on that machine.

dmesg output for the NIC from Fedora Core 4:

e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth0: e100_probe: addr 0xfebff000, irq 9, MAC addr 00:06:29:DE:7C:29
e100: eth1: e100_probe: addr 0xfebfe000, irq 10, MAC addr 00:06:29:DE:7C:28

---

NetBSD specific information (gathered via serial console, no typos! :)

*** ifconfig -a output ***

netbsd# ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:06:29:de:87:39
        media: Ethernet autoselect (none flowcontrol,rxpause,txpause)
        status: no carrier
        inet6 fe80::206:29ff:fede:8739%fxp0 prefixlen 64 scopeid 0x1

-----

*** dmesg ***

NetBSD 3.0_STABLE (GENERIC.MP) #0: Sun Jan 29 18:31:53 CET 2006

Welcome to NetBSD!

Terminal type is vt100.                                                 
We recommend creating a non-root account and using su(1) for root
access.
netbsd# dmesg
NetBSD 3.0_STABLE (GENERIC.MP) #0: Sun Jan 29 18:31:53 CET 2006
        root@deneb.ts39-bln.riscworks.net:/usr/obj/sys/arch/i386/compile/GENERIC
.MP
total memory = 1023 MB
avail memory = 991 MB
BIOS32 rev. 0 found at 0xfd6b1
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (IBM ENSW Kiowa SMP   )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: Intel Pentium III (686-class), 745.03 MHz, id 0x681
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0681-0001-518D-B1BE-950F
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 745.00 MHz, id 0x681
cpu1: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu1: features 387fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu1: L2 cache 256 KB 32B/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: serial number 0000-0681-0001-D85E-E93F-4833
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type PCI   
mpbios: bus 3 is type ISA   
ioapic0 at mainbus0 apid 14 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443GX Host Bridge/Controller (rev. 0x00)
agp0 at pchb0: aperture at 0xf0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443GX AGP Interface (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Chips and Technologies 69000 (rev. 0x64)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixide0 at pci0 dev 7 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel ignored (disabled)
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus0 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB (PIIX4) USB Host
Controller (rev. 0x01)
pci_intr_map: no mapping for pin D (line=ff)
uhci0: couldn't map interrupt
Intel 82371AB (PIIX4) Power Management Controller (miscellaneous
bridge, revisio n 0x02) at pci0 dev 7 function 3 not configured
fxp0 at pci0 dev 17 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at ioapic0 pin 18 (irq 10)
fxp0: Ethernet address 00:06:29:de:87:39
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 18 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at ioapic0 pin 17 (irq 11)
fxp1: Ethernet address 00:06:29:de:87:38
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 20 function 0: Digital Equipment DC21152 PCI-PCI
Bridge (rev. 0 x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
pdcsata0 at pci2 dev 14 function 0
pdcsata0: Promise PDC40718 SATA300 controller (rev. 0x02)
pdcsata0: interrupting at ioapic0 pin 17 (irq 11)
pdcsata0: bus-master DMA support present
atabus1 at pdcsata0 channel 0
atabus2 at pdcsata0 channel 1
atabus3 at pdcsata0 channel 2
atabus4 at pdcsata0 channel 3
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CRN-8241B, 1999/09/04, 1.22> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
wd0 at atabus4 drive 0: <WDC WD3200SD-01KNB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448
sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5
(Ultra/100) wd0(pdcsata0:3:0): using PIO mode 4, Ultra-DMA mode 5
(Ultra/100) (using DMA) boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 0 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

-----

*** pcictl output ***

netbsd# pcictl /dev/pci0 dump -d 17
PCI configuration registers:
  Common header:
    0x00: 0x12298086 0x02900157 0x02000008 0x00006408

    Vendor Name: Intel (0x8086)
    Device Name: 82557 Fast Ethernet LAN Controller (0x1229)
    Command register: 0x0157
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: on
      Palette snooping: off
      Parity error checking: on
      Address/data stepping: off
      System error (SERR): on
      Fast back-to-back transactions: off
    Status register: 0x0290
      Capability List support: on
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: network (0x02)
    Subclass Name: ethernet (0x00)
    Interface: 0x00
    Revision ID: 0x08
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x64
    Cache Line Size: 0x08

  Type 0 ("normal" device) header:
    0x10: 0xfebff000 0x00003041 0xfea00000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x105c1014
    0x30: 0x00000000 0x000000dc 0x00000000 0x38080100

    Base address register at 0x10
      type: 32-bit nonprefetchable memory
      base: 0xfebff000, not sized
    Base address register at 0x14
      type: i/o
      base: 0x00003040, not sized
    Base address register at 0x18
      type: 32-bit nonprefetchable memory
      base: 0xfea00000, not sized
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x1014
    Subsystem ID: 0x105c
    Expansion ROM Base Address: 0x00000000
    Capability list pointer: 0xdc
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x38
    Minimum Grant: 0x08
    Interrupt pin: 0x01 (pin A)
    Interrupt line: 0x00

  Capability register at 0xdc
    type: 0x01 (Power Management, rev. 1.0)

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x7e220001
    0xe0: 0x3a004000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

--

netbsd# pcictl /dev/pci0 dump -d 18
PCI configuration registers:
  Common header:
    0x00: 0x12298086 0x02900157 0x02000008 0x00006408

    Vendor Name: Intel (0x8086)
    Device Name: 82557 Fast Ethernet LAN Controller (0x1229)
    Command register: 0x0157
      I/O space accesses: on
      Memory space accesses: on
      Bus mastering: on
      Special cycles: off
      MWI transactions: on
      Palette snooping: off
      Parity error checking: on
      Address/data stepping: off
      System error (SERR): on
      Fast back-to-back transactions: off

    Status register: 0x0290
      Capability List support: on
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: on
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: network (0x02)
    Subclass Name: ethernet (0x00)
    Interface: 0x00
    Revision ID: 0x08
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x64
    Cache Line Size: 0x08

  Type 0 ("normal" device) header:
    0x10: 0xfebfe000 0x00003081 0xfe900000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x105c1014
    0x30: 0x00000000 0x000000dc 0x00000000 0x3808010b

    Base address register at 0x10
      type: 32-bit nonprefetchable memory
      base: 0xfebfe000, not sized
    Base address register at 0x14
      type: i/o
      base: 0x00003080, not sized
    Base address register at 0x18
      type: 32-bit nonprefetchable memory
      base: 0xfe900000, not sized
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x1014
    Subsystem ID: 0x105c
    Expansion ROM Base Address: 0x00000000
    Capability list pointer: 0xdc
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x38
    Minimum Grant: 0x08
    Interrupt pin: 0x01 (pin A)
    Interrupt line: 0x0b

  Capability register at 0xdc
    type: 0x01 (Power Management, rev. 1.0)

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x7e220001
    0xe0: 0x3a004003 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
>How-To-Repeat:
try to access the network.
>Fix:
yes, please. :)