--bg08WKrSYDhXBjb5
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Martin Husemann <martin@duskware.de> wrote:
=20
>  On Tue, Mar 14, 2006 at 08:55:00PM +0000, jschauma@netmeister.org wrote:
>  > bge0: interrupting at ioapic2 pin 1 (irq 11)
> =20
>  Does this line change with a new kernel?

Nope.  Same thing.  Here's the dmesg of the -current kernel:


NetBSD 3.99.16 (NONNE64) #0: Tue Mar 14 14:15:24 EST 2006
jschauma@doppelbock.hpcf.cs.stevens-tech.edu:/share/src/sys/arch/amd64/comp=
ile/obj/NONNE64
total memory =3D 4095 MB
avail memory =3D 3947 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (MSI      RHAPSODY    )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 265, 1795.02 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Dual Core AMD Opteron(tm) Processor 265, 1794.89 MHz
cpu1: features:
f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu2 at mainbus0: apid 2 (application processor)
cpu2: starting
cpu2: Dual Core AMD Opteron(tm) Processor 265, 1794.89 MHz
cpu2: features:
f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu2: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu3 at mainbus0: apid 3 (application processor)
cpu3: starting
cpu3: Dual Core AMD Opteron(tm) Processor 265, 1794.89 MHz
cpu3: features:
f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu3: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type ISA
ioapic0 at mainbus0 apid 4 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 5 (I/O APIC)
ioapic1: pa 0xfebfe000, version 11, 4 pins
ioapic2 at mainbus0 apid 6 (I/O APIC)
ioapic2: pa 0xfebff000, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 6 function 0: Advanced Micro Devices AMD8111 I/O Hub
(rev. 0x07)
pci1 at ppb0 bus 3
pci1: i/o space, memory space enabled
Advanced Micro Devices AMD8111 USB Host Controller (USB serial bus,
interface 0x10, revision 0x0b) at pci1 dev 0 function 0 not configured
Advanced Micro Devices AMD8111 USB Host Controller (USB serial bus,
interface 0x10, revision 0x0b) at pci1 dev 0 function 1 not configured
ATI Technologies Rage XL (VGA display, revision 0x27) at pci1 dev 4
function 0 not configured
pcib0 at pci0 dev 7 function 0
pcib0: Advanced Micro Devices AMD8111 LPC Controller (rev. 0x05)
Advanced Micro Devices AMD8111 SMBus Controller (SMBus serial bus,
revision 0x02) at pci0 dev 7 function 2 not configured
Advanced Micro Devices AMD8111 ACPI Controller (miscellaneous bridge,
revision 0x05) at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 10 function 0: Advanced Micro Devices AMD8131 PCI-X
Tunnel (rev. 0x12)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Adaptec (2nd PCI Vendor ID) product 0x801d (SCSI mass storage,
revision 0x10) at pci2 dev 3 function 0 not configured
Adaptec (2nd PCI Vendor ID) product 0x801d (SCSI mass storage,
revision 0x10) at pci2 dev 3 function 1 not configured
Advanced Micro Devices AMD8131 IO Apic (interrupt system, interface
0x10, revision 0x01) at pci0 dev 10 function 1 not configured
ppb2 at pci0 dev 11 function 0: Advanced Micro Devices AMD8131 PCI-X
Tunnel (rev. 0x12)
pci3 at ppb2 bus 1
pci3: memory space enabled
bge0 at pci3 dev 5 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
bge0: interrupting at ioapic2 pin 1 (irq 11)
bge0: ASIC unknown BCM5704 (0x2100), Ethernet address
00:30:48:75:d2:94
brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy0: using BCM5704 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1 at pci3 dev 5 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
bge1: interrupting at ioapic2 pin 2 (irq 15)
bge1: ASIC unknown BCM5704 (0x2100), Ethernet address
00:30:48:75:d2:95
brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy1: using BCM5704 DSP patch
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
Advanced Micro Devices AMD8131 IO Apic (interrupt system, interface
0x10, revision 0x01) at pci0 dev 11 function 1 not configured
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev.
0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev.
0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev.
0x00)
pchb4 at pci0 dev 25 function 0
pchb4: Advanced Micro Devices AMD64 HyperTransport configuration (rev.
0x00)
pchb5 at pci0 dev 25 function 1
pchb5: Advanced Micro Devices AMD64 Address Map configuration (rev.
0x00)
pchb6 at pci0 dev 25 function 2
pchb6: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb7 at pci0 dev 25 function 3
pchb7: Advanced Micro Devices AMD64 Miscellaneous configuration (rev.
0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
boot device: bge0
root on bge0
nfs_boot: trying DHCP/BOOTP
bge0: link state changed to DOWN
bge0: link state changed to UP
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: timeout...
nfs_boot: trying RARP (and RPC/bootparam)
bge0: link state changed to DOWN
bge0: link state changed to UP
revarp failed, error=3D51
no file system for bge0
cannot mount root, error =3D 79
root device (default bge0):

--=20
Ancient Principle of WYGIWYGAINGW:
What You Get Is What You're Given, And It's No Good Whining.
--Terry Pratchett et al. (The Science of Discworld)

--bg08WKrSYDhXBjb5
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (NetBSD)

iD8DBQFEF0K3fFtkr68iakwRAr29AJwMeZ4n3gxzVkh9pqrOG4zHP2mhGgCdHPqW
EP+tk5bASwZZdSeXPCOXBqg=
=Vtv9
-----END PGP SIGNATURE-----

--bg08WKrSYDhXBjb5--