Subject: Re: kern/33271: Can't boot with Ricoh 5C476 PCI-CardBus bridge activated
To: None <kern-bug-people@netbsd.org, gnats-admin@netbsd.org,>
From: Marco Castronovo <marco.castronovo@gmail.com>
List: netbsd-bugs
Date: 04/17/2006 08:55:02
The following reply was made to PR kern/33271; it has been noted by GNATS.

From: "Marco Castronovo" <marco.castronovo@gmail.com>
To: gnats-bugs@netbsd.org
Cc: 
Subject: Re: kern/33271: Can't boot with Ricoh 5C476 PCI-CardBus bridge activated
Date: Mon, 17 Apr 2006 10:51:48 +0200

 The system boots without problems with a current GENERIC kernel
 snapshot (3.99.18)
 This is the dmesg now:
 
 NetBSD 3.99.18 (GENERIC) #0: Sun Apr 16 06:32:20 UTC 2006
 =09builds@b3.netbsd.org:/home/builds/ab/HEAD/i386/200604160000Z-obj/home/bu=
 ilds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
 total memory =3D 502 MB
 avail memory =3D 485 MB
 mainbus0 (root)
 cpu0 at mainbus0: (uniprocessor)
 cpu0: Intel Pentium M (Dothan) (686-class), 1600.14 MHz, id 0x6d6
 cpu0: features afe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features afe9fbbf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
 cpu0: features afe9fbbf<FXSR,SSE,SSE2,SS,TM,SBF>
 cpu0: features2 180<EST,TM2>
 cpu0: "Intel(R) Pentium(R) M processor 1.60GHz"
 cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
 cpu0: L2 cache 2 MB 64B/line 8-way
 cpu0: using thermal monitor 2
 cpu0: Enhanced SpeedStep (1340 mV) 1600 MHz
 cpu0: Enhanced SpeedStep frequencies available (MHz): 1600 1400 1200
 1000 800 600
 cpu0: 64 page colors
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Intel 82855GM Host-Hub Controller (rev. 0x02)
 agp0 at pchb0: detected 8060k stolen memory
 agp0: aperture at 0xf0000000, size 0x8000000
 Intel 82855GM GMCH Memory Controller (miscellaneous system, revision
 0x02) at pci0 dev 0 function 1 not configured
 Intel 82855GM GMCH Configuration Process (miscellaneous system,
 revision 0x02) at pci0 dev 0 function 3 not configured
 vga1 at pci0 dev 2 function 0: Intel 82855GM GMCH Integrated Graphics
 Device (rev. 0x02)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 Intel 82855GM GMCH Integrated Graphics Device (miscellaneous display,
 revision 0x02) at pci0 dev 2 function 1 not configured
 uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x=
 03)
 uhci0: interrupting at irq 5
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x=
 03)
 uhci1: interrupting at irq 5
 usb1 at uhci1: USB revision 1.0
 uhub1 at usb1
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x=
 03)
 uhci2: interrupting at irq 5
 usb2 at uhci2: USB revision 1.0
 uhub2 at usb2
 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x=
 03)
 ehci0: interrupting at irq 4
 ehci0: BIOS refuses to give up ownership, using force
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
 usb3 at ehci0: USB revision 2.0
 uhub3 at usb3
 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub3: 6 ports with 6 removable, self powered
 ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x83)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 cbb0 at pci1 dev 3 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa9)
 cbb0: NOT USED because of unconfigured interrupt
 cbb1 at pci1 dev 3 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa9)
 cbb1: NOT USED because of unconfigured interrupt
 fwohci0 at pci1 dev 3 function 2: Ricoh 5C552 PCI-CardBus
 bridge/Firewire (rev. 0x01)
 fwohci0: interrupting at irq 5
 fwohci0: OHCI version 1.0 (ROM=3D1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:e0:18:00:03:23:07:79
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 rtk0 at pci1 dev 4 function 0: Realtek 8139 10/100BaseTX
 rtk0: interrupting at irq 5
 rtk0: Ethernet address 00:11:2f:db:2b:21
 rlphy0 at rtk0 phy 7: Realtek internal PHY
 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 iwi0 at pci1 dev 5 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI
 Adapter (rev. 0x05)
 iwi0: interrupting at irq 5
 iwi0: 802.11 address 00:0e:35:2b:d1:a0
 iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
 24Mbps 36Mbps 48Mbps 54Mbps
 pcib0 at pci0 dev 31 function 0
 pcib0: Intel 82801DB ISA Bridge (rev. 0x03)
 piixide0 at pci0 dev 31 function 1
 piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x03)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at irq 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel interrupting at irq 15
 atabus1 at piixide0 channel 1
 auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
 pci_intr_map: no mapping for pin B (line=3D00)
 auich0: can't map interrupt
 Intel 82801DB AC97 Modem Controller (modem communications, revision
 0x03) at pci0 dev 31 function 6 not configured
 isa0 at pcib0
 lpt0 at isa0 port 0x378-0x37b irq 7
 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 attimer0 at isa0 port 0x40-0x43: AT Timer
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff
 npx0: using exception 16
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 pcic0 at isa0 port 0x3e0-0x3e1 iomem 0xd0000-0xdffff irq
 pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
 pcmcia0 at pcic0 controller 0 socket 0
 pcmcia1 at pcic0 controller 0 socket 1
 pcppi0: attached to attimer0
 isapnp0: no ISA Plug 'n Play devices found
 fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
 ieee1394if0: bus manager 0 (me)
 pcic0: controller 0 detecting irqs with mask 0xdeb8:..9..10..11
 pcic0: using irq 9 for socket events
 Kernelized RAIDframe activated
 an0 at pcmcia0 function 0: <Cisco Systems, 350 Series Wireless LAN Adapter>
 pcic0: port 0x400-0x43f
 pcmcia0: card irq 10
 an0: Cisco Systems 350 Series (firmware 4.25.30)
 an0: 802.11 address: 00:07:0e:b9:a3:63, channel: 1-13
 an0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 umass0 at uhub3 port 2 configuration 1 interface 0
 umass0: SanDisk Corporation Cruzer Mini, rev 2.00/0.10, addr 2
 umass0: using SCSI over Bulk-Only
 scsibus0 at umass0: 2 targets, 1 lun per target
 sd0 at scsibus0 target 0 lun 0: <SanDisk, Cruzer Mini, 0.1> disk removable
 sd0: 122 MB, 979 cyl, 8 head, 32 sec, 512 bytes/sect x 250879 sectors
 wd0 at atabus0 drive 0: <IC25N060ATMR04-0>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sect=
 ors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DM=
 A)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <TOSHIBA ODD-DVD SD-R6372, X4G6207820, 1730>
 cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA=
 )
 sd0(umass0:0:0:0): no door lock
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 rtk0: link state changed to DOWN
 rtk0: link state changed to UP
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)