Subject: Re: port-amd64/33927: -current/amd64 kernel reboots early in boot process
To: Matthias Drochner <M.Drochner@fz-juelich.de>
From: None <khym@azeotrope.org>
List: netbsd-bugs
Date: 07/13/2006 00:12:38
On Thu, Jul 13, 2006 at 12:42:00AM +0200, Matthias Drochner wrote:
> Didn't follow the thread from the beginning, but there was a change
> by me which unfortunately affects multiprocessor systems: I changed
> the kernel memory allocator to respect the execute permission bit.
> (This used to work all the time for alpha.)
> I don't understand all the details yet, but MP systems need some
> pieces of memory mapped with execute permission; see the appended
> patch.
> sorry for any breakage
> Matthias
Well, it's getting much further than it did :) Still not quite working
yet, however...
A kernel built from this config file:
include "arch/amd64/conf/GENERIC_ACPI"
options MULTIPROCESSOR
booting hd0a:/netbsd-genericacpimp (howto 0x2)
7408024+866632+389536 [520680+332613]=0xa145d8
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 3.99.21 (GENERIC_ACPI.MP) #0: Thu Jul 13 00:02:07 CDT 2006
root@cheetah.azeotrope.org:/usr/obj.amd64/sys/arch/amd64/compile/GENERIC_ACPI.MP
total memory = 2046 MB
avail memory = 1962 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 246, 2009.35 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: AMD Opteron(tm) Processor 246, 2009.26 MHz
cpu1: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xd8000000, version 11, 4 pins
ioapic2 at mainbus0 apid 4 (I/O APIC)
ioapic2: pa 0xd8001000, version 11, 4 pins
ioapic3 at mainbus0 apid 5 (I/O APIC)
ioapic3: pa 0xd8400000, version 11, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
timecounter: selected timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0C [ACPI power button device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0A05 [Generic Container Device] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA nForce4 Memory Controller (miscellaneous memory, revision 0xa3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA nForce4 PCI-ISA bridge (rev. 0xa3)
NVIDIA nForce4 SMBus (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: NVIDIA nForce4 USB Host Controller (rev. 0xa2)
ohci0: interrupting at ioapic0 pin 20 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1: NVIDIA nForce4 USB2 Host Controller (rev. 0xa3)
ehci0: interrupting at ioapic0 pin 21 (irq 7)
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0: nForce4 AC-97 Audio
auich0: interrupting at ioapic0 pin 22 (irq 12)
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
viaide1: using ioapic0 pin 23 (irq 11) for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
viaide2: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: NVIDIA nForce4 PCI Host Bridge (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fwohci0 at pci1 dev 5 function 0: Texas Instruments TSB43AA22/A IEEE 1394 Host Controller (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 16 (irq 12)
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:23:50:e6
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
nfe0 at pci0 dev 10 function 0: ioapic0 pin 21 (irq 11), address 00:e0:81:54:85:86
makphy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 14 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: NVIDIA product 0x0140 (rev. 0xa2)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
pchb4 at pci0 dev 25 function 0
pchb4: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb5 at pci0 dev 25 function 1
pchb5: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb6 at pci0 dev 25 function 2
pchb6: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb7 at pci0 dev 25 function 3
pchb7: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
pcppi0: attached to attimer0
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
ioapic3: enabling
timecounter: Timecounter "TSC" frequency 2009350730 Hz quality 800
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
ieee1394if0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
ieee1394if0: bus manager 1 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47619 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON DVDRW SOHW-1673S, , JS0B> cdrom removable
ieee1394if0: New S400 device ID:000483020200eb50
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
sbp0 at ieee1394if0: SBP-2/SCSI over IEEE1394
scsibus0 at sbp0: 1 target, 0 luns per target
sd0 at scsibus0 target 0 lun 0: <DAT Opti, Speedzter3., 0037> simplified direct fixed
sd0: 186 GB, 190734 cyl, 64 head, 32 sec, 512 bytes/sect x 390625000 sectors
uhub2 at uhub0 port 4
uhub2: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub2: 4 ports with 4 removable, self powered
wd0 at atabus4 drive 0: <WDC WD2500SD-01KCB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide2:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus5 drive 0: <HDT722525DLA380>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide2:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 3, iclass 3/1
ums0 at uhidev0: 6 buttons and Z dir.
wsmouse0 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
fatal double fault in supervisor mode
[ other stuff that I didn't quite catch ]
[ reboot ]