The following reply was made to PR kern/25462; it has been noted by GNATS.

From: Kvedulv / Michael Moll <kvedulv@kvedulv.de>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: kern/25462
Date: Wed, 30 Aug 2006 20:04:01 +0200

 the problem is still there, any ideas on this?
 
 
 
 Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
 OpenBoot 4.0, 512 MB memory installed, Serial #51364831.
 Ethernet address 0:3:ba:f:c3:df, Host ID: 830fc3df.
 
 
 ok boot net netbsd
 Boot device: /pci@1f,0/pci@1,1/network@c,1  File and args: netbsd
 >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.9
 >> (builds@b4.netbsd.org, Thu Aug 24 08:40:33 UTC 2006)
 net_open: client addr: 192.168.200.4
 net_open: subnet mask: 255.255.255.0
 net_open: net gateway: 192.168.200.8
 net_open: server addr: 192.168.200.11
 net_open: server path: /tmp/sparc
 Using BOOTP protocol: ip address: 192.168.200.4, hostname: ray, netmask: 255.255.255.0, gateway: 192.168.200.8
 root addr=192.168.200.11 path=/tmp/sparc
 =0xd55cf0
 Loading netbsd: 5378456+5594288+302184=0xd9fdd8
 sparc64_init(0xf0061954, 0xfffc5e28, 0x20, 0xf0061954, 0xf0061954)
 sparc64_init: bmagic=44444230, bi=0x1d9fde0
 console is /pci@1f,0/pci@1,1/isa@7/serial@0,3f8
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.0_BETA (INSTALL) #0: Mon Aug 28 22:48:36 UTC 2006
         builds@b1.netbsd.org:/home/builds/ab/netbsd-4/sparc64/200608280000Z-obj/home/builds/ab/netbsd-4/src/sys/arch/sparc64/compile/INSTALL
 total memory = 512 MB
 avail memory = 484 MB
 timecounter: Timecounters tick every 10.000 msec
 bootpath: /pci@1f,0/pci@1,1/network@c,1
 mainbus0 (root): SUNW,UltraAX-i2: hostid 830fc3df
 cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, version 0 FPU
 cpu0: 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
 cpu0: upa id 0
 psycho0 at mainbus0
 SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
 psycho_alloc_extent: prom_getprop failed
 psycho_alloc_extent: prom_getprop failed
 DVMA map: c0000000 to e0000000
 IOTSB: 844000 to 8c4000
 pci0 at psycho0
 pci0: i/o space, memory space enabled
 ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 ebus0 at pci1 dev 12 function 0
 ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
 flashprom at ebus0 addr 0-fffff not configured
 clock0 at ebus0 addr 0-1fff: mk48t59
 ebus_attach: idprom: incomplete
 SUNW,lomh at ebus0 addr 200000-200003 ipl 42 not configured
 Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci1 dev 3 function 0 not configured
 ebus1 at pci1 dev 7 function 0
 ebus1: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
 power at ebus1 addr 800-82f ipl 37 not configured
 com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
 com0: console
 com1 at ebus1 addr 2e8-2ef ipl 43: ns16550a, working fifo
 gem0 at pci1 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
 gem0: interrupting at ivec 3006
 gem0: Ethernet address 00:03:ba:0f:c3:df, 2KB RX fifo, 2KB TX fifo
 ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
 ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 ohci0 at pci1 dev 12 function 3: Sun Microsystems USB controller (rev. 0x01)
 ohci0: interrupting at ivec 24
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 4 ports with 4 removable, self powered
 aceride0 at pci1 dev 13 function 0
 aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
 aceride0: bus-master DMA support present
 aceride0: primary channel configured to native-PCI mode
 aceride0: using ivec 180c for native-PCI interrupt
 atabus0 at aceride0 channel 0
 aceride0: secondary channel configured to native-PCI mode
 atabus1 at aceride0 channel 1
 gem1 at pci1 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
 gem1: interrupting at ivec 301c
 gem1: Ethernet address 00:03:ba:0f:c3:df, 2KB RX fifo, 2KB TX fifo
 ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface
 ukphy1: OUI 0x0008bb, model 0x0002, rev. 1
 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 ohci1 at pci1 dev 5 function 3: Sun Microsystems USB controller (rev. 0x01)
 ohci1: interrupting at ivec 26
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 uhub1 at usb1
 uhub1: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 4 ports with 4 removable, self powered
 ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 esiop0 at pci2 dev 8 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
 esiop0: using on-board RAM
 esiop0: interrupting at ivec 1820
 scsibus0 at esiop0: 16 targets, 8 luns per target
 esiop1 at pci2 dev 8 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
 esiop1: using on-board RAM
 esiop1: interrupting at ivec 1820
 scsibus1 at esiop1: 16 targets, 8 luns per target
 pcons at mainbus0 not configured
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: selected timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "tick-counter" frequency 500000000 Hz quality 100
 timecounter: selected timecounter "tick-counter" frequency 500000000 Hz quality 100
 No counter-timer -- using %tick at 500MHz as system clock.
 Kernelized RAIDframe activated
 md0: internal 5120 KB image area
 scsibus0: waiting 2 seconds for devices to settle...
 scsibus1: waiting 2 seconds for devices to settle...
 probe(esiop0:0:0:0): command timeout, CDB: 0x12 00 00 00 24 00
 
 
 regards
 -- 
 Kvedulv / Michael Moll
 e-mail : kvedulv@kvedulv.de
   WWW  : http://www.kvedulv.de/
   GSM  : +49 175 606 7861