>Number:         35128
>Category:       kern
>Synopsis:       USB host controller resume fails on ThinkPad X32
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Nov 26 16:00:00 +0000 2006
>Originator:     Kouichirou Hiratsuka
>Release:        NetBSD 4.99.4
>Organization:
>Environment:
System: NetBSD firefly.localdomain 4.99.4 NetBSD 4.99.4 (X32) #155: Sun Nov 26 23:58:01 JST 2006 root@firefly.localdomain:/obj/usr/src/sys/arch/i386/compile/X32 i386
Architecture: i386
Machine: i386
>Description:
	After resuming from acpi sleep, USB host controller can't be
	used on ThinkPad X32.

	dmesg:

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.4 (X32) #155: Sun Nov 26 23:58:01 JST 2006
	root@firefly.localdomain:/obj/usr/src/sys/arch/i386/compile/X32
total memory = 1534 MB
avail memory = 1502 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd750
PCI BIOS rev. 2.1 found at 0xfd8d6
pcibios: config mechanism [1][x], special cycles [x][x], last bus 8
PCI IRQ Routing Table rev. 1.0 found at 0xfdea0, size 272 bytes (15 entries)
PCI Interrupt Router at 000:31:0 (Intel 82371FB (PIIX) PCI-ISA Bridge compatible)
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x0000580c
pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x60000000
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium M (Dothan) (686-class), 1798.58 MHz, id 0x6d6
cpu0: features afe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR>
cpu0: features afe9f9bf<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu0: features afe9f9bf<FXSR,SSE,SSE2,SS,TM,SBF>
cpu0: features2 180<EST,TM2>
cpu0: "Intel(R) Pentium(R) M processor 1.80GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 2 MB 64B/line 8-way
cpu0: using thermal monitor 2
cpu0: Enhanced SpeedStep (1340 mV) 1800 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1800 1600 1400 1200 1000 800 600
cpu0: 64 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <IBM   ,TP-1Q   ,00003020>, AslId < LTP,00000000>
acpi0: found ECDT, GPE 28
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 11
LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11
LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11
LNKC: ACPI: Found matching pin for 2.0.INTC at func 2: 11
LNKA: ACPI: Found matching pin for 2.1.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 2.2.INTA at func 0: 11
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C01 at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0200 at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0 irq 13
npx0: reported by CPUID; using exception 16
PNP0B00 at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (IBM3780): aux port
pckbc1: irq 12
acpiec0 at acpi0 (PNP0C09-0): ACPI Embedded Controller
acpiec0: io 0x62,0x66
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
IBM0068 at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 91.0C passive 64.0C
apm0 at acpi0: Power Management spec V1.2
acpibat0: battery info: SANYO, LION, IBM-92P1094,  1251
acpiacad0: AC adapter online.
pcppi0: attached to attimer0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M6 LY (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
cbb0 at pci2 dev 0 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xaa)
cbb1 at pci2 dev 0 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xaa)
Ricoh 5C552 PCI-CardBus bridge/Firewire (Firewire serial bus, interface 0x10, revision 0x02) at pci2 dev 0 function 2 not configured
wm0 at pci2 dev 1 function 0: Intel i82540EP 1000BASE-T Ethernet, rev. 3
wm0: interrupting at irq 11
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:10:c6:dc:7d:b5
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
iwi0 at pci2 dev 2 function 0: Intel PRO/Wireless LAN 2915ABG Mini-PCI Adapter (rev. 0x05)
iwi0: interrupting at irq 11
iwi0: 802.11 address 00:15:00:0e:c7:9f
iwi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: Intel 82801DB ISA Bridge (rev. 0x01)
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801DB SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
WARNING: Callback scheduled before sysmon task queue thread present.
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
wd0 at atabus0 drive 0: <HTE721010G9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

	Output of resume:

acpi0: good morning!
pckbd0: resuming...
uhci0: cannot start
uhci1: cannot start
uhci2: cannot start
ehci0: config timeout
ehci0: BIOS has given up ownership
atabus0: resuming...
atabus1: resuming...
uhci2: host controller halted
uhci1: host controller halted
uhci0: host controller halted
acpi0: resuming
ehci0: port reset timeout
uhub3: port 3 reset failed

>How-To-Repeat:
	[enable acpi]
	# sysctl -w machdep.sleep_state=3
	[resume]

>Fix:
	Sorry, I don't know.