Subject: port-i386/35300: AMD Geode GX3 peripherals not supported
To: None <port-i386-maintainer@netbsd.org, gnats-admin@netbsd.org,>
From: None <aaron@frye.com>
List: netbsd-bugs
Date: 12/20/2006 21:25:01
>Number: 35300
>Category: port-i386
>Synopsis: AMD Geode GX3 peripherals not supported
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: port-i386-maintainer
>State: open
>Class: change-request
>Submitter-Id: net
>Arrival-Date: Wed Dec 20 21:25:00 +0000 2006
>Originator: aaron@frye.com
>Release: NetBSD 4.99.6
>Organization:
Aaron J. Grier | Frye Electronics, Tigard, OR | aaron@frye.com
>Environment:
System: NetBSD 4.99.6 (INSTALL) #0: Wed Dec 13 17:23:40 PST 2006
Architecture: i386
Machine: i386
>Description:
* the highlights:
- vendor 0x1022 product 0x2082 (entertainment crypto) at pci0 dev 1 function 2 not configured
crypto on AMD GX3 geode
- vendor 0x1283 product 0x8888 (miscellaneous bridge, revision 0x03) at pci0 dev 13 function 0 not configured
PCI to ISA bridge from ITE
http://www.iteusa.com/product_info/PC/Brief-IT8888_2.asp
- pciide0 at pci0 dev 15 function 2
- pciide0: vendor 0x1022 product 0x209a (rev. 0x01)
- pciide0: bus-master DMA support present, but unused (no driver support)
- pciide0: primary channel wired to compatibility mode
- pciide0: primary channel ignored (other hardware responding at addresses)
- pciide0: secondary channel wired to compatibility mode
- pciide0: secondary channel ignored (not responding; disabled or no drives?)
PATA controller on AMD GX3 geode
- vendor 0x1022 product 0x2093 (audio multimedia, revision 0x01) at pci0 dev 15 function 3 not configured
AC97 on AMD GX3 geode
- vendor 0x10b9 product 0x5281 (miscellaneous mass storage, interface 0x85, revision 0xa4) at pci0 dev 17 function 0 not configured
ALI M5283 SATA/RAID Controller
* full dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.6 (INSTALL) #0: Wed Dec 13 17:23:40 PST 2006
aaron@orthanc.unix.fryenet:/var/obj/usr/projects/NetBSD/current/src/sys/arch/i386/compile/INSTALL
total memory = 247 MB
avail memory = 233 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfa900
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD K5 or K6 (586-class), 498.07 MHz, id 0x5a2
cpu0: features 88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP>
cpu0: features 88a93d<PGE,CMOV,MPC,MMX>
cpu0: "Geode(TM) Integrated Processor by AMD PCS"
cpu0: I-cache 64 KB 32B/line 16-way, D-cache 64 KB 32B/line 16-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: ITLB 16 4 KB entries fully associative
cpu0: DTLB 16 4 KB entries fully associative
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 1 function 0
pchb0: vendor 0x1022 product 0x2080 (rev. 0x30)
vga1 at pci0 dev 1 function 1: vendor 0x1022 product 0x2081 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
vendor 0x1022 product 0x2082 (entertainment crypto) at pci0 dev 1 function 2 not configured
rtk0 at pci0 dev 11 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 5
rtk0: Ethernet address 00:08:9b:69:c4:16
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x1283 product 0x8888 (miscellaneous bridge, revision 0x03) at pci0 dev 13 function 0 not configured
pcib0 at pci0 dev 15 function 0
pcib0: vendor 0x1022 product 0x2090 (rev. 0x02)
pciide0 at pci0 dev 15 function 2
pciide0: vendor 0x1022 product 0x209a (rev. 0x01)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel ignored (other hardware responding at addresses)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (not responding; disabled or no drives?)
vendor 0x1022 product 0x2093 (audio multimedia, revision 0x01) at pci0 dev 15 function 3 not configured
ohci0 at pci0 dev 15 function 4: vendor 0x1022 product 0x2094 (rev. 0x02)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 15 function 5: vendor 0x1022 product 0x2095 (rev. 0x02)
ehci0: interrupting at irq 3
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: vendor 0x1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
rtk1 at pci0 dev 16 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk1: interrupting at irq 10
rtk1: Ethernet address 00:08:9b:69:c4:15
rlphy1 at rtk1 phy 7: Realtek internal PHY
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x10b9 product 0x5281 (miscellaneous mass storage, interface 0x85, revision 0xa4) at pci0 dev 17 function 0 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
intr_establish: pic pic0 pin 3: can't share type 3 with 2
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atabus0 at wdc0 channel 0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "TSC" frequency 498072450 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 5000 KB image area
wd0 at atabus0 drive 1: <SAMSUNG CF/ATA>
wd0: drive supports 4-sector PIO transfers, LBA addressing
wd0: 63488 KB, 248 cyl, 16 head, 32 sec, 512 bytes/sect x 126976 sectors
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock gained 6 days
WARNING: CHECK AND RESET THE DATE!
warning: no /dev/console
>How-To-Repeat:
boot 4.99.6 on an AMD GX3 geode-based single-board computer, such as the
iEi WAFER-LX-800;
http://www.ieiworld.com/en/product_IPC.asp?model=WAFER-LX
>Fix:
>Unformatted: