Subject: kern/36389: azalia(4) (ALC260) output not working
To: None <kern-bug-people@netbsd.org, gnats-admin@netbsd.org,>
From: None <essen@dev-extend.eu>
List: netbsd-bugs
Date: 05/27/2007 17:10:00
>Number: 36389
>Category: kern
>Synopsis: azalia(4) (ALC260) output not working
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Sun May 27 17:10:00 +0000 2007
>Originator: Loic Hoguin
>Release: NetBSD 4.0_BETA2
>Organization:
Dev:Extend
>Environment:
System: NetBSD blackrose.dev-extend.eu 4.0_BETA2 NetBSD 4.0_BETA2 (BLACKROSE_GENERIC) #2: Sun May 27 14:35:54 CEST 2007 root@blackrose.dev-extend.eu:/usr/obj/sys/arch/i386/compile/BLACKROSE_GENERIC i386
Architecture: i386
Machine: i386
>Description:
azalia(4) isn't outputting any sound.
It is however capable of recording (tested with audacity).
I noticed the following things:
- dmesg with DEBUG shows various outamp: mute=1 size=0 steps=0 offset=0
for output widgets
- xmms always start with sound off (it is probably taking the sound volume
from the kernel)
- changing volume/options with mixerctl does not change anything for output
(it does however works well for input)
- audacity says this when I start it (maybe not related): "Cannot get
priority range for scheduling policy 0"
Here's the computer from which it is running:
http://www.keynux.com/default_zone/fr/html/Prod_Notebook_YmaxDC_Spec.php
Here's the mixerctl -av:
outputs.master=123,123 delta=3
outputs.master.mute=off [ off on ]
outputs.headphones.mute=off [ off on ]
outputs.headphones.boost=off [ off on ]
outputs.mono.mute=off [ off on ]
outputs.mic1.mute=off [ off on ]
outputs.mic1=input [ input output ]
outputs.mic2.mute=off [ off on ]
outputs.mic2=input [ input output ]
outputs.line1.mute=off [ off on ]
outputs.line1=input [ input output ]
outputs.line2.mute=off [ off on ]
outputs.line2=input [ input output ]
inputs.dac.mute=off [ off on ]
inputs.mic1.mute=off [ off on ]
inputs.mic1=125,125 delta=3
inputs.mic2.mute=off [ off on ]
inputs.mic2=125,125 delta=3
inputs.line1.mute=off [ off on ]
inputs.line1=125,125 delta=3
inputs.line2.mute=off [ off on ]
inputs.line2=125,125 delta=3
inputs.cd.mute=off [ off on ]
inputs.cd=125,125 delta=3
inputs.speaker.mute=off [ off on ]
inputs.speaker=125 delta=3
record.adc04.source=mic1 [ mic1 mic2 line1 line2 cd ]
record.adc04.mute=off [ off on ]
record.adc04=123,123 delta=7
record.adc05.source=line1 [ mic1 mic2 line1 line2 cd mixerout ]
record.adc05.mute=off [ off on ]
record.adc05=123,123 delta=7
playback.mode=analog [ analog spdif ]
record.mode=adc04 [ adc04 adc05 spdif ]
Here's the dmesg with AZALIA_DEBUG:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.0_BETA2 (BLACKROSE_GENERIC) #0: Sun May 27 00:08:56 CEST 2007
root@blackrose.dev-extend.eu:/usr/obj/sys/arch/i386/compile/BLACKROSE_GENERIC
total memory = 2039 MB
rbus: rbus_min_start set to 0x80000000
avail memory = 1995 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf0010
PCI BIOS rev. 3.0 found at 0xf0031
pcibios: config mechanism [1][x], special cycles [x][x], last bus 6
PCI IRQ Routing Table rev. 1.0 found at 0xf5260, size 192 bytes (10 entries)
PCI Interrupt Router at 000:31:0 (Intel 82801GBM LPC Interface Bridge compatible)
------------------------------------------
device vendor product pin PIRQ IRQ stage
------------------------------------------
000:02:0 0x8086 0x27a2 A 0x00 3 0 already assigned
000:27:0 0x8086 0x27d8 A 0x03 7 0 already assigned
000:28:0 0x8086 0x27d0 A 0x00 3 0 already assigned
000:28:1 0x8086 0x27d2 B 0x01 4 0 already assigned
000:28:2 0x8086 0x27d4 C 0x02 5 0 already assigned
000:29:0 0x8086 0x27c8 A 0x07 11 0 already assigned
000:29:1 0x8086 0x27c9 B 0x03 7 0 already assigned
000:29:2 0x8086 0x27ca C 0x02 5 0 already assigned
000:29:3 0x8086 0x27cb D 0x00 3 0 already assigned
000:29:7 0x8086 0x27cc A 0x07 11 0 already assigned
000:31:2 0x8086 0x27c4 B 0x03 7 0 fixed up
001:00:0 0x11ab 0x4352 A 0x00 3 0 already assigned
002:00:0 0x8086 0x4222 A 0x01 4 0 already assigned
006:07:0 0x1180 0x0832 A 0x02 5 0 already assigned
006:07:1 0x1180 0x0822 B 0x01 4 0 already assigned
006:07:2 0x1180 0x0843 B 0x01 4 0 already assigned
006:07:3 0x1180 0x0592 B 0x01 4 0 already assigned
------------------------------------------
mainbus0 (root)
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005800
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005808
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x00005810
pci_addr_fixup: 000:31:2 0x8086 0x27c4 new address 0x0000580c
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Core 2 (Merom) (686-class), 1995.09 MHz, id 0x6f6
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: "Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1308 mV) 2000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1000
cpu0: 64 page colors
cpu at mainbus0: not configured
ioapic at mainbus0: not configured
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,11000623>, AslId <MSFT,00000097>
ACPI Warning (utinit-0165): Invalid FADT value PM2_CNT_LEN=0 at offset 5A FADT=0xc2da7500 [20060217]
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
LNKD: ACPI: Found matching pin for 0.31.INTB at func 2: 7
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 3
LNKH: ACPI: Found matching pin for 0.29.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 7
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 5
LNKA: ACPI: Found matching pin for 0.29.INTD at func 3: 3
LNKD: ACPI: Found matching pin for 0.27.INTA at func 0: 7
LNKA: ACPI: Found matching pin for 0.28.INTA at func 0: 3
LNKB: ACPI: Found matching pin for 0.28.INTB at func 1: 4
LNKC: ACPI: Found matching pin for 0.28.INTC at func 2: 5
LNKC: ACPI: Found matching pin for 4.7.INTA at func 0: 5
LNKB: ACPI: Found matching pin for 4.7.INTB at func 1: 4
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 3
LNKB: ACPI: Found matching pin for 2.0.INTA at func 0: 4
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A08 at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0303 at acpi0 not configured
SYN0B04 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0C02 at acpi0 not configured
INT0800 at acpi0 not configured
PNP0C02 at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
PNP0C02 at acpi0 not configured
PNP0C02 at acpi0 not configured
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
PNP0C01 at acpi0 not configured
acpibut1 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 100.0C passive 61.0C
apm0 at acpi0: Power Management spec V1.2
acpiacad0: AC adapter online.
acpibat0: battery info: Arima, LIon, W81266LD, 111006600
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: Intel 82945GM/PM/GMS Integrated Graphics Device (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at irq 7
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
azalia0: host: 4 output, 4 input, and 0 bidi streams
azalia_attach: resetting
azalia_attach: reset counter = 5000
azalia_attach: reset counter = 4989
azalia0: found a codec at #0
azalia0: found a codec at #1
ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
Marvell Yukon 88E8038 (ethernet network, revision 0x14) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci2 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02)
wpi0: interrupting at irq 4
wpi0: 802.11 address 00:19:d2:61:99:45
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at irq 7
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at irq 5
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at irq 3
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: interrupting at irq 11
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
Ricoh product 0x0832 (Firewire serial bus, interface 0x10) at pci4 dev 7 function 0 not configured
Ricoh product 0x0822 (SD Host Controller system, revision 0x19) at pci4 dev 7 function 1 not configured
Ricoh product 0x0843 (miscellaneous system, revision 0x01) at pci4 dev 7 function 2 not configured
Ricoh product 0x0592 (miscellaneous system, revision 0x0a) at pci4 dev 7 function 3 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Palm detect, Multi-finger
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia_init_corb: CORB allocation succeeded.
azalia_init_corb: CORBWP=0; size=256
azalia_init_rirb: RIRB allocation succeeded.
azalia_init_rirb: RIRBRP=0, size=256
azalia0: information of codec[0] follows:
azalia_codec_init_vtbl: vid=10ec0260 subid=2057161f
azalia0: codec[0]: Realtek ALC260 (rev. 4.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia_codec_init: nidstart=1 #functions=1
azalia_codec_init: FTYPE result = 0x00000101
azalia_codec_init: There are 26 widgets in the audio function.
azalia0: encodings=1<PCM>
azalia0: PCM formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: inamp: mute=0 size=0 steps=0 offset=0
azalia0: outamp: mute=0 size=0 steps=0 offset=0
azalia0: dac02 wcap=11<FORMATOV,STEREO>
azalia0: encodings=1<PCM>
azalia0: PCM formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: dac03 wcap=211<DIGITAL,FORMATOV,STEREO>
azalia0: encodings=1<PCM>
azalia0: PCM formats=1e0560<32bit,24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: adc04 wcap=10011b<CONNLIST,FORMATOV,AMPOV,INAMP,STEREO>
azalia0: encodings=1<PCM>
azalia0: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
azalia0: connections=0x12,0x13,0x14,0x15,0x16,0xf,0x10; selected=0x12
azalia0: inamp: mute=1 size=3 steps=35 offset=0
azalia0: adc05 wcap=10011b<CONNLIST,FORMATOV,AMPOV,INAMP,STEREO>
azalia0: encodings=1<PCM>
azalia0: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
azalia0: connections=0x12,0x13,0x14,0x15,0x16,0x7,0xf,0x10; selected=0x14
azalia0: inamp: mute=1 size=3 steps=35 offset=0
azalia0: adc06 wcap=100391<DIGITAL,CONNLIST,UNSOL,FORMATOV,STEREO>
azalia0: encodings=1<PCM>
azalia0: PCM formats=1e0160<32bit,24bit,20bit,16bit,96kHz,48kHz,44.1kHz>
azalia0: connections=0x19; selected=0x19
azalia0: mix07 wcap=20010b<CONNLIST,AMPOV,INAMP,STEREO>
azalia0: connections=0x12,0x13,0x14,0x15,0x16,0x17,0xf,0x10; selected=0x12
azalia0: inamp: mute=1 size=3 steps=65 offset=35
azalia0: mix08 wcap=20010f<CONNLIST,AMPOV,OUTAMP,INAMP,STEREO>
azalia0: connections=0x2,0x7; selected=0x2
azalia0: inamp: mute=1 size=0 steps=0 offset=0
azalia0: outamp: mute=0 size=3 steps=64 offset=64
azalia0: mix09 wcap=20010f<CONNLIST,AMPOV,OUTAMP,INAMP,STEREO>
azalia0: connections=0x2,0x7; selected=0x2
azalia0: inamp: mute=1 size=0 steps=0 offset=0
azalia0: outamp: mute=0 size=3 steps=64 offset=64
azalia0: mix0a wcap=20010e<CONNLIST,AMPOV,OUTAMP,INAMP>
azalia0: connections=0x2,0x7; selected=0x2
azalia0: inamp: mute=1 size=0 steps=0 offset=0
azalia0: outamp: mute=0 size=3 steps=65 offset=35
azalia0: sel0b wcap=300101<CONNLIST,STEREO>
azalia0: connections=0x8,0x9; selected=0x8
azalia0: sel0c wcap=300101<CONNLIST,STEREO>
azalia0: connections=0x8,0x9; selected=0x8
azalia0: sel0d wcap=300101<CONNLIST,STEREO>
azalia0: connections=0x8,0x9; selected=0x8
azalia0: sel0e wcap=300101<CONNLIST,STEREO>
azalia0: connections=0x8,0x9; selected=0x8
azalia0: black0f wcap=40018d<CONNLIST,UNSOL,AMPOV,OUTAMP,STEREO>
azalia0: pin config; device=line-out color=black assoc=1 seq=0 cap=1003f<EAPD,INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0: connections=0x8; selected=0x8
azalia0: outamp: mute=1 size=0 steps=0 offset=0
azalia0: black10 wcap=40018d<CONNLIST,UNSOL,AMPOV,OUTAMP,STEREO>
azalia0: pin config; device=speaker color=black assoc=15 seq=0 cap=1003f<EAPD,INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0: connections=0x9; selected=0x9
azalia0: outamp: mute=1 size=0 steps=0 offset=0
azalia0: black11 wcap=40010c<CONNLIST,AMPOV,OUTAMP>
azalia0: pin config; device=speaker color=black assoc=15 seq=0 cap=10<OUTPUT>
azalia0: connections=0xa; selected=0xa
azalia0: outamp: mute=1 size=0 steps=0 offset=0
azalia0: black12 wcap=40018d<CONNLIST,UNSOL,AMPOV,OUTAMP,STEREO>
azalia0: pin config; device=mic color=black assoc=3 seq=0 cap=133f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0: connections=0xb; selected=0xb
azalia0: outamp: mute=1 size=0 steps=0 offset=0
azalia0: unknown13 wcap=40018d<CONNLIST,UNSOL,AMPOV,OUTAMP,STEREO>
azalia0: pin config; device=mic color=unknown assoc=3 seq=1 cap=133f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0: connections=0xc; selected=0xc
azalia0: outamp: mute=1 size=0 steps=0 offset=0
azalia0: black14 wcap=40018d<CONNLIST,UNSOL,AMPOV,OUTAMP,STEREO>
azalia0: pin config; device=line-in color=black assoc=3 seq=14 cap=133f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0: connections=0xd; selected=0xd
azalia0: outamp: mute=1 size=0 steps=0 offset=0
azalia0: black15 wcap=40018d<CONNLIST,UNSOL,AMPOV,OUTAMP,STEREO>
azalia0: pin config; device=speaker color=black assoc=15 seq=0 cap=133f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0: connections=0xe; selected=0xe
azalia0: outamp: mute=1 size=0 steps=0 offset=0
azalia0: black16 wcap=400001<STEREO>
azalia0: pin config; device=speaker color=black assoc=15 seq=0 cap=20<INPUT>
azalia0: black17 wcap=400000
azalia0: pin config; device=speaker color=black assoc=15 seq=0 cap=20<INPUT>
azalia0: black18 wcap=400380<DIGITAL,CONNLIST,UNSOL>
azalia0: pin config; device=SPDIF-out color=black assoc=2 seq=0 cap=14<OUTPUT,PRESENCE>
azalia0: connections=0x3; selected=0x3
azalia0: black19 wcap=400280<DIGITAL,UNSOL>
azalia0: pin config; device=speaker color=black assoc=15 seq=0 cap=24<INPUT,PRESENCE>
azalia0: widget1a wcap=f00040<PROC>
azalia0: volume1b wcap=600080<UNSOL>
azalia0: delta=0 steps=64
azalia_codec_init: dacgroup[0]: 02
azalia_codec_init: dacgroup[1]: 03
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM formats=e0560<24bit,20bit,16bit,192kHz,96kHz,48kHz,44.1kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM formats=60160<20bit,16bit,96kHz,48kHz,44.1kHz>
generic_mixer_default: unmute
generic_mixer_default: process bidirectional pins
generic_mixer_default: set volume
azalia0: information of codec[1] follows:
azalia_codec_init_vtbl: vid=11c11040 subid=2057161f
azalia0: codec[1]: 0x11c1/0x1040 (rev. 2.0)
azalia0: codec[1]: High Definition Audio rev. 1.0
azalia_codec_init: nidstart=1 #functions=1
azalia_codec_init: FTYPE result = 0x00000102
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
azalia0: using the #0 codec
audio0 at azalia0: full duplex, independent
azalia_round_blocksize: resultant block size = 9600
azalia_round_blocksize: resultant block size = 9600
Kernelized RAIDframe activated
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: IBM Optical, rev 2.00/5.80, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <ST910021AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <TSSTcorpCD/DVDW SN-S082D, , SS03> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
acpiacad0: AC adapter online.
acpiacad0: AC adapter online.
>How-To-Repeat:
Get a similar computer and try outputing sound.
I will test the patches ASAP.
>Fix:
>Unformatted: