This is an OpenPGP/MIME signed message (RFC 2440 and 3156)
--Apple-Mail-6-995722026
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed

I just noticed that my last msg was not appended to the bug report,  
don't know why.


On Jul 20, 2007, at 17:53 , Andreas Wrede wrote:

> [repost: previous post got truncated at first line containing a  
> single period]
>
> A recent pull-up to the 4.0 branch "improved" the situation  
> somewhat (for some random value of "improved"):
>
>  bge0 at pci5 dev 9 function 0: Broadcom BCM5704C Dual Gigabit  
> Ethernet
>  bge0: interrupting at ioapic2 pin 0 (irq 11)
> -bge0: firmware handshake timed out, val = 4b657654
> -bge0: RX CPU self-diagnostics failed!
> -bge0: chip initialization failed
> +bge0: ASIC BCM5704 A3 (0x2003), Ethernet address 00:e0:81:30:d6:7c
> +brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0
> +brgphy0: using BCM5704 DSP patch
> +brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,  
> 1000baseT, 1000baseT-FDX, auto
>  bge1 at pci5 dev 9 function 1: Broadcom BCM5704C Dual Gigabit  
> Ethernet
>  bge1: interrupting at ioapic2 pin 1 (irq 10)
> -bge1: firmware handshake timed out, val = 4b657654
> -bge1: RX CPU self-diagnostics failed!
> -bge1: chip initialization failed
> +bge1: ASIC BCM5704 A3 (0x2003), Ethernet address 00:e0:81:30:d6:7d
> +brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0
> +brgphy1: using BCM5704 DSP patch
> +brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,  
> 1000baseT, 1000baseT-FDX, auto
>
>
> Trying to use the device results in:
>
> # ifconfig bge0 up
> # ifconfig bge1 up
> [ after a short while...]
> bge0: PHY read timed out
> bge0: PHY read timed out
> bge0: PHY read timed out
> bge0: PHY read timed out
> bge0: PHY read timed out
> bge1: PHY read timed out
> bge0: PHY read timed out
> bge0: PHY read timed out
> bge1: PHY read timed out
> bge1: PHY read timed out
> [scrolling quickly....]
> ..
> ..
> # ifconfig bge0 down
> bge0: PHY read timed out
> bge0: block failed to stop: reg 0x468, bit 0x00000002
> bge0: block failed to stop: reg 0x2c00, bit 0x00000002
> bge0: block failed to stop: reg 0x2000, bit 0x00000002
> bge0: block failed to stop: reg 0x3400, bit 0x00000002
> bge0: block failed to stop: reg 0x2400, bit 0x00000002
> bge0: block failed to stop: reg 0x2800, bit 0x00000002
> bge0: block failed to stop: reg 0x3000, bit 0x00000002
> bge0: block failed to stop: reg 0x1400, bit 0x00000002
> bge0: block failed to stop: reg 0x1800, bit 0x00000002
> bge0: block failed to stop: reg 0xc00, bit 0x00000002
> bge0: block failed to stop: reg 0x4800, bit 0x00000002
> bge0: block failed to stop: reg 0x1000, bit 0x00000002
> bge0: block failed to stop: reg 0x6400, bit 0x00000002
> bge0: block failed to stop: reg 0x1c00, bit 0x00000002
> bge0: block failed to stop: reg 0x3c00, bit 0x00000002
> bge0: block failed to stop: reg 0x4c00, bit 0x00000002
> bge0: block failed to stop: reg 0x3800, bit 0x00000002
> bge0: block failed to stop: reg 0x4400, bit 0x00000002
> bge0: block failed to stop: reg 0x4000, bit 0x00000002
> bge1: PHY read timed out
> bge1: PHY read timed out
> [now only bge1 messages scolling quickly....]
> ..
> ..
> # ifconfig bge1 down
> bge1: PHY read timed out
> bge1: block failed to stop: reg 0x468, bit 0x00000002
> bge1: block failed to stop: reg 0x2c00, bit 0x00000002
> bge1: block failed to stop: reg 0x2000, bit 0x00000002
> bge1: block failed to stop: reg 0x3400, bit 0x00000002
> bge1: block failed to stop: reg 0x2400, bit 0x00000002
> bge1: block failed to stop: reg 0x2800, bit 0x00000002
> bge1: block failed to stop: reg 0x3000, bit 0x00000002
> bge1: block failed to stop: reg 0x1400, bit 0x00000002
> bge1: block failed to stop: reg 0x1800, bit 0x00000002
> bge1: block failed to stop: reg 0xc00, bit 0x00000002
> bge1: block failed to stop: reg 0x4800, bit 0x00000002
> bge1: block failed to stop: reg 0x1000, bit 0x00000002
> bge1: block failed to stop: reg 0x6400, bit 0x00000002
> bge1: block failed to stop: reg 0x1c00, bit 0x00000002
>
> [ all is quiet ]
>
> # ifconfig bge0
> bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>          
> capabilities=3f00<IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CS 
> UM_Rx,UDP4CSUM_Tx>
>          
> enabled=3f00<IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM_Rx 
> ,UDP4CSUM_Tx>
>         address: 00:e0:81:30:d6:7c
>         media: Ethernet autoselect
>         status: no carrier
>         inet6 fe80::2e0:81ff:fe30:d67c%bge0 prefixlen 64 scopeid 0x3
> # ifconfig bge1
> bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>          
> capabilities=3f00<IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CS 
> UM_Rx,UDP4CSUM_Tx>
>          
> enabled=3f00<IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UDP4CSUM_Rx 
> ,UDP4CSUM_Tx>
>         address: 00:e0:81:30:d6:7d
>         media: Ethernet autoselect
>         status: no carrier
>         inet6 fe80::2e0:81ff:fe30:d67d%bge1 prefixlen 64 scopeid 0x4
>
>
>

-- 
     aew


--Apple-Mail-6-995722026
content-type: application/pgp-signature; x-mac-type=70674453;
	name=PGP.sig
content-description: This is a digitally signed message part
content-disposition: inline; filename=PGP.sig
content-transfer-encoding: 7bit

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (Darwin)

iD8DBQFGqLRoEh/h9J/TQyERAhaqAKCk3UPgrRrkfiXolNclDl8fc+HD3QCeOivm
9FpkJY3zeAJ4zZksMdNSzD0=
=Onyy
-----END PGP SIGNATURE-----

--Apple-Mail-6-995722026--