Subject: kern/36727: lkms that work with Single processor kernel do not work with muli-processor kernel
To: None <kern-bug-people@netbsd.org, gnats-admin@netbsd.org,>
From: None <ianm@cat.co.za>
List: netbsd-bugs
Date: 08/03/2007 09:45:01
>Number: 36727
>Category: kern
>Synopsis: lkms that work with Single processor kernel do not work with muli-processor kernel
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Fri Aug 03 09:45:00 +0000 2007
>Originator: Ian McIntosh
>Release: netBSD 3.1_STABLE
>Organization:
Cathexis
>Environment:
NetBSD core2core2 3.1_STABLE (GENERIC.MPACPI) #0: Thu Jul 26 23:04:22 SAST 2007 /usr/src/sys/arch/i386/compile/GENERIC.MPACPI i386
>Description:
LKM's used for our PCI cards function correctly with a single processor kernel but do not function with a multiprocessor kernel. The lkms are compiled with -DMULTIPROCESSOR and without any options that change the size of the structures.
The LKM appears to load correctly in that it passes all the PCI setup and also gets assigned an interrupt pin.
The problem is that once the lkm loads it doesn't get any interrupts. A look at dmesg indicates that the driver has been assigned ioapic0 pin 11 as its interrupt pin but vmstat indicates there are no interrupts being generated for this pin.
However the interrupt counts for ioapic0 pin 17 seem to be going wild. A top on the system indicates that CPU0 is 72% idle when it was 100% idle before the lkm loaded. Looking at /var/log/messages ioapic0 pin 17 is assigned to uhci1 (USB controller I think). Below is the vmstat before and after the lkm load and the relevant dmesg.
Before running lkm driver
-----------------------------------
interrupt total rate
cpu0 softclock 5836 112
cpu0 softnet 45 0
cpu0 softserial 0 0
cpu0 timer 6039 116
cpu0 halt IPI 0 0
cpu0 timeset IPI 0 0
cpu0 FPU flush IPI 0 0
cpu0 FPU synch IPI 0 0
cpu0 TLB shootdown IPI 100 1
cpu0 MTRR update IPI 0 0
cpu0 GDT update IPI 0 0
cpu1 softclock 0 0
cpu1 softnet 0 0
cpu1 softserial 0 0
cpu1 timer 5119 98
cpu1 halt IPI 0 0
cpu1 timeset IPI 53 1
cpu1 FPU flush IPI 0 0
cpu1 FPU synch IPI 1 0
cpu1 TLB shootdown IPI 845 16
cpu1 MTRR update IPI 0 0
cpu1 GDT update IPI 0 0
ioapic0 pin 9 0 0
ioapic0 pin 6 1 0
ioapic0 pin 7 0 0
ioapic0 pin 4 0 0
ioapic0 pin 1 245 4
ioapic0 pin 12 0 0
ioapic0 pin 19 10 0
ioapic0 pin 20 0 0
ioapic0 pin 17 0 0
ioapic0 pin 18 0 0
ioapic0 pin 21 55 1
ioapic0 pin 14 0 0
ioapic0 pin 15 0 0
ioapic0 pin 23 1892 36
Total 20241 389
After loading LKM driver
-----------------------------------
interrupt total rate
cpu0 softclock 40713 101
cpu0 softnet 443 1
cpu0 softserial 0 0
cpu0 timer 40916 102
cpu0 halt IPI 0 0
cpu0 timeset IPI 0 0
cpu0 FPU flush IPI 0 0
cpu0 FPU synch IPI 1 0
cpu0 TLB shootdown IPI 182 0
cpu0 MTRR update IPI 0 0
cpu0 GDT update IPI 0 0
cpu1 softclock 0 0
cpu1 softnet 0 0
cpu1 softserial 0 0
cpu1 timer 39996 99
cpu1 halt IPI 0 0
cpu1 timeset IPI 402 1
cpu1 FPU flush IPI 0 0
cpu1 FPU synch IPI 1 0
cpu1 TLB shootdown IPI 1426 3
cpu1 MTRR update IPI 0 0
cpu1 GDT update IPI 0 0
ioapic0 pin 9 0 0
ioapic0 pin 6 1 0
ioapic0 pin 7 0 0
ioapic0 pin 4 0 0
ioapic0 pin 1 628 1
ioapic0 pin 12 0 0
ioapic0 pin 19 10 0
ioapic0 pin 20 0 0
ioapic0 pin 17 88155626 219839
ioapic0 pin 18 0 0
ioapic0 pin 21 517 1
ioapic0 pin 14 0 0
ioapic0 pin 15 0 0
ioapic0 pin 23 2231 5
ioapic0 pin 11 0 0
Total 88283093 220157
Jul 27 01:57:27 core2core2 /netbsd: NetBSD 3.1_STABLE (GENERIC.MPACPI) #0: Thu Jul 26 23:04:22 SAST 2007
Jul 27 01:57:27 core2core2 /netbsd: root@core2core2:/usr/src/sys/arch/i386/compile/GENERIC.MPACPI
Jul 27 01:57:27 core2core2 /netbsd: total memory = 503 MB
Jul 27 01:57:27 core2core2 /netbsd: avail memory = 483 MB
Jul 27 01:57:27 core2core2 /netbsd: BIOS32 rev. 0 found at 0xf0010
Jul 27 01:57:27 core2core2 /netbsd: mainbus0 (root)
Jul 27 01:57:27 core2core2 /netbsd: cpu0 at mainbus0: apid 0 (boot processor)
Jul 27 01:57:27 core2core2 /netbsd: cpu0: Intel Pentium Pro, II or III (686-class), 1866.68 MHz, id 0x6f2
Jul 27 01:57:27 core2core2 /netbsd: cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
Jul 27 01:57:27 core2core2 /netbsd: cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
Jul 27 01:57:27 core2core2 /netbsd: cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
Jul 27 01:57:27 core2core2 /netbsd: cpu0: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
Jul 27 01:57:27 core2core2 /netbsd: cpu0: "Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz"
Jul 27 01:57:27 core2core2 /netbsd: cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
Jul 27 01:57:27 core2core2 /netbsd: cpu0: L2 cache 2 MB 64B/line 8-way
Jul 27 01:57:27 core2core2 /netbsd: cpu0: using thermal monitor 1
Jul 27 01:57:27 core2core2 /netbsd: cpu0: Enhanced SpeedStep (1340 mV) - unknown CPU or operating point.
Jul 27 01:57:27 core2core2 /netbsd: cpu0: calibrating local timer
Jul 27 01:57:27 core2core2 /netbsd: cpu0: apic clock running at 266 MHz
Jul 27 01:57:27 core2core2 /netbsd: cpu0: 64 page colors
Jul 27 01:57:27 core2core2 /netbsd: cpu1 at mainbus0: apid 1 (application processor)
Jul 27 01:57:27 core2core2 /netbsd: cpu1: starting
Jul 27 01:57:27 core2core2 /netbsd: cpu1: Intel Pentium Pro, II or III (686-class), 1866.61 MHz, id 0x6f2
Jul 27 01:57:27 core2core2 /netbsd: cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
Jul 27 01:57:27 core2core2 /netbsd: cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
Jul 27 01:57:27 core2core2 /netbsd: cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
Jul 27 01:57:27 core2core2 /netbsd: cpu1: features2 e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
Jul 27 01:57:27 core2core2 /netbsd: cpu1: "Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz"
Jul 27 01:57:27 core2core2 /netbsd: cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
Jul 27 01:57:27 core2core2 /netbsd: cpu1: L2 cache 2 MB 64B/line 8-way
Jul 27 01:57:27 core2core2 /netbsd: cpu1: using thermal monitor 1
Jul 27 01:57:27 core2core2 /netbsd: cpu1: Enhanced SpeedStep (1340 mV) - unknown CPU or operating point.
Jul 27 01:57:27 core2core2 /netbsd: ioapic0 at mainbus0 apid 2 (I/O APIC)
Jul 27 01:57:27 core2core2 /netbsd: ioapic0: pa 0xfec00000, version 20, 24 pins
Jul 27 01:57:27 core2core2 /netbsd: acpi0 at mainbus0
Jul 27 01:57:27 core2core2 /netbsd: acpi0: using Intel ACPI CA subsystem version 20040211
Jul 27 01:57:27 core2core2 /netbsd: acpi0: X/RSDT: OemId <A_M_I_,OEMXSDT ,12000607>, AslId <MSFT,00000097>
Jul 27 01:57:27 core2core2 /netbsd: acpi0: SCI interrupting at int 9
Jul 27 01:57:27 core2core2 /netbsd: acpi0: fixed-feature power button present
Jul 27 01:57:27 core2core2 /netbsd: ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
Jul 27 01:57:27 core2core2 last message repeated 3 times
Jul 27 01:57:27 core2core2 /netbsd: PNP0A08 at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0C01 [System Board] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0000 [AT Interrupt Controller] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0200 [AT DMA Controller] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0100 [AT Timer] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0B00 [AT Real-Time Clock] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0800 [AT-style speaker sound] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: npx0 at acpi0 (PNP0C04)
Jul 27 01:57:27 core2core2 /netbsd: npx0: io 0xf0-0xff irq 13
Jul 27 01:57:27 core2core2 /netbsd: npx0: reported by CPUID; using exception 16
Jul 27 01:57:27 core2core2 /netbsd: fdc0 at acpi0 (PNP0700)
Jul 27 01:57:27 core2core2 /netbsd: fdc0: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
Jul 27 01:57:27 core2core2 /netbsd: fdc0: expected BUFFER, got 4
Jul 27 01:57:27 core2core2 /netbsd: lpt0 at acpi0 (PNP0401)
Jul 27 01:57:27 core2core2 /netbsd: lpt0: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
Jul 27 01:57:27 core2core2 /netbsd: PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: ATK0110 at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0103 at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: pckbc0 at acpi0 (PNP0303): kbd port
Jul 27 01:57:27 core2core2 /netbsd: pckbc0: io 0x60,0x64 irq 1
Jul 27 01:57:27 core2core2 /netbsd: pckbc1 at acpi0 (PNP0F03): aux port
Jul 27 01:57:27 core2core2 /netbsd: pckbc1: irq 12
Jul 27 01:57:27 core2core2 /netbsd: PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: com0 at acpi0 (PNP0501-1)
Jul 27 01:57:27 core2core2 /netbsd: com0: io 0x3f8-0x3ff irq 4
Jul 27 01:57:27 core2core2 /netbsd: com0: ns16550a, working fifo
Jul 27 01:57:27 core2core2 /netbsd: INT0800 at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: PNP0C01 [System Board] at acpi0 not configured
Jul 27 01:57:27 core2core2 /netbsd: acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
Jul 27 01:57:27 core2core2 /netbsd: PNP0C0F [PCI interrupt link device] at acpi0 not configured
Jul 27 01:57:27 core2core2 last message repeated 6 times
Jul 27 01:57:27 core2core2 /netbsd: pckbd0 at pckbc0 (kbd slot)
Jul 27 01:57:27 core2core2 /netbsd: pckbc0: using irq 1 for kbd slot
Jul 27 01:57:27 core2core2 /netbsd: wskbd0 at pckbd0: console keyboard
Jul 27 01:57:27 core2core2 /netbsd: pms0 at pckbc0 (aux slot)
Jul 27 01:57:27 core2core2 /netbsd: pckbc0: using irq 12 for aux slot
Jul 27 01:57:27 core2core2 /netbsd: wsmouse0 at pms0 mux 0
Jul 27 01:57:27 core2core2 /netbsd: pci0 at mainbus0 bus 0: configuration mode 1
Jul 27 01:57:27 core2core2 /netbsd: pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
Jul 27 01:57:27 core2core2 /netbsd: pchb0 at pci0 dev 0 function 0
Jul 27 01:57:27 core2core2 /netbsd: pchb0: Intel 82945G/P Memory Controller Hub (rev. 0x02)
Jul 27 01:57:27 core2core2 /netbsd: vga0 at pci0 dev 2 function 0: Intel product 0x2772 (rev. 0x02)
Jul 27 01:57:27 core2core2 /netbsd: wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
Jul 27 01:57:27 core2core2 /netbsd: wsmux1: connecting to wsdisplay0
Jul 27 01:57:27 core2core2 /netbsd: azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
Jul 27 01:57:27 core2core2 /netbsd: azalia0: interrupting at ioapic0 pin 19 (irq 5)
Jul 27 01:57:27 core2core2 /netbsd: azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 1)
Jul 27 01:57:27 core2core2 /netbsd: azalia0: host: High Definition Audio rev. 1.0
Jul 27 01:57:27 core2core2 /netbsd: ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: pci1 at ppb0 bus 3
Jul 27 01:57:27 core2core2 /netbsd: pci1: i/o space, memory space enabled, rd/line, wr/inv ok
Jul 27 01:57:27 core2core2 /netbsd: ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: pci2 at ppb1 bus 2
Jul 27 01:57:27 core2core2 /netbsd: pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Jul 27 01:57:27 core2core2 /netbsd: unknown vendor 0x1969 product 0x1048 (ethernet network, revision 0xb0) at pci2 dev 0 function 0 not configured
Jul 27 01:57:27 core2core2 /netbsd: uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: uhci0: interrupting at ioapic0 pin 20 (irq 3)
Jul 27 01:57:27 core2core2 /netbsd: usb0 at uhci0: USB revision 1.0
Jul 27 01:57:27 core2core2 /netbsd: uhub0 at usb0
Jul 27 01:57:27 core2core2 /netbsd: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 27 01:57:27 core2core2 /netbsd: uhub0: 2 ports with 2 removable, self powered
Jul 27 01:57:27 core2core2 /netbsd: uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: uhci1: interrupting at ioapic0 pin 17 (irq 10)
Jul 27 01:57:27 core2core2 /netbsd: usb1 at uhci1: USB revision 1.0
Jul 27 01:57:27 core2core2 /netbsd: uhub1 at usb1
Jul 27 01:57:27 core2core2 /netbsd: uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 27 01:57:27 core2core2 /netbsd: uhub1: 2 ports with 2 removable, self powered
Jul 27 01:57:27 core2core2 /netbsd: uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: uhci2: interrupting at ioapic0 pin 18 (irq 10)
Jul 27 01:57:27 core2core2 /netbsd: usb2 at uhci2: USB revision 1.0
Jul 27 01:57:27 core2core2 /netbsd: uhub2 at usb2
Jul 27 01:57:27 core2core2 /netbsd: uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 27 01:57:27 core2core2 /netbsd: uhub2: 2 ports with 2 removable, self powered
Jul 27 01:57:27 core2core2 /netbsd: uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: uhci3: interrupting at ioapic0 pin 19 (irq 5)
Jul 27 01:57:27 core2core2 /netbsd: usb3 at uhci3: USB revision 1.0
Jul 27 01:57:27 core2core2 /netbsd: uhub3 at usb3
Jul 27 01:57:27 core2core2 /netbsd: uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 27 01:57:27 core2core2 /netbsd: uhub3: 2 ports with 2 removable, self powered
Jul 27 01:57:27 core2core2 /netbsd: ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: ehci0: interrupting at ioapic0 pin 20 (irq 3)
Jul 27 01:57:27 core2core2 /netbsd: ehci0: BIOS has given up ownership
Jul 27 01:57:27 core2core2 /netbsd: ehci0: EHCI version 1.0
Jul 27 01:57:27 core2core2 /netbsd: ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
Jul 27 01:57:27 core2core2 /netbsd: usb4 at ehci0: USB revision 2.0
Jul 27 01:57:27 core2core2 /netbsd: uhub4 at usb4
Jul 27 01:57:27 core2core2 /netbsd: uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
Jul 27 01:57:27 core2core2 /netbsd: uhub4: single transaction translator
Jul 27 01:57:27 core2core2 /netbsd: uhub4: 8 ports with 8 removable, self powered
Jul 27 01:57:27 core2core2 /netbsd: ppb2 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xe1)
Jul 27 01:57:27 core2core2 /netbsd: pci3 at ppb2 bus 1
Jul 27 01:57:27 core2core2 /netbsd: pci3: i/o space, memory space enabled
Jul 27 01:57:27 core2core2 /netbsd: Altera product 0x0003 (undefined subclass 0x00, revision 0x01) at pci3 dev 0 function 0 not configured
Jul 27 01:57:27 core2core2 /netbsd: fxp0 at pci3 dev 1 function 0: i82559 Ethernet, rev 8
Jul 27 01:57:27 core2core2 /netbsd: fxp0: interrupting at ioapic0 pin 21 (irq 5)
Jul 27 01:57:27 core2core2 /netbsd: fxp0: Ethernet address 00:0e:0c:6c:9f:51
Jul 27 01:57:27 core2core2 /netbsd: inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
Jul 27 01:57:27 core2core2 /netbsd: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Jul 27 01:57:27 core2core2 /netbsd: pcib0 at pci0 dev 31 function 0
Jul 27 01:57:27 core2core2 /netbsd: pcib0: Intel 82801GB/GR LPC Interface Bridge (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: piixide0 at pci0 dev 31 function 1
Jul 27 01:57:27 core2core2 /netbsd: piixide0: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: piixide0: bus-master DMA support present
Jul 27 01:57:27 core2core2 /netbsd: piixide0: primary channel configured to compatibility mode
Jul 27 01:57:27 core2core2 /netbsd: piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
Jul 27 01:57:27 core2core2 /netbsd: atabus0 at piixide0 channel 0
Jul 27 01:57:27 core2core2 /netbsd: piixide0: secondary channel configured to compatibility mode
Jul 27 01:57:27 core2core2 /netbsd: piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
Jul 27 01:57:27 core2core2 /netbsd: atabus1 at piixide0 channel 1
Jul 27 01:57:27 core2core2 /netbsd: piixide1 at pci0 dev 31 function 2
Jul 27 01:57:27 core2core2 /netbsd: piixide1: Intel 82801GB/GR Serial ATA/Raid Controller (ICH7) (rev. 0x01)
Jul 27 01:57:27 core2core2 /netbsd: piixide1: bus-master DMA support present
Jul 27 01:57:27 core2core2 /netbsd: piixide1: primary channel configured to native-PCI mode
Jul 27 01:57:27 core2core2 /netbsd: piixide1: using ioapic0 pin 23 (irq 5) for native-PCI interrupt
Jul 27 01:57:27 core2core2 /netbsd: atabus2 at piixide1 channel 0
Jul 27 01:57:27 core2core2 /netbsd: piixide1: secondary channel configured to native-PCI mode
Jul 27 01:57:27 core2core2 /netbsd: atabus3 at piixide1 channel 1
Jul 27 01:57:27 core2core2 /netbsd: Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
Jul 27 01:57:27 core2core2 /netbsd: isa0 at pcib0
Jul 27 01:57:27 core2core2 /netbsd: pcppi0 at isa0 port 0x61
Jul 27 01:57:27 core2core2 /netbsd: midi0 at pcppi0: PC speaker
Jul 27 01:57:27 core2core2 /netbsd: sysbeep0 at pcppi0
Jul 27 01:57:27 core2core2 /netbsd: isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
Jul 27 01:57:27 core2core2 /netbsd: isapnp0: no ISA Plug 'n Play devices found
Jul 27 01:57:27 core2core2 /netbsd: ioapic0: enabling
Jul 27 01:57:27 core2core2 /netbsd: azalia0: codec[0]: 0x11d4/0x1986 (rev. 5.0)
Jul 27 01:57:27 core2core2 /netbsd: azalia0: codec[0]: High Definition Audio rev. 1.0
Jul 27 01:57:27 core2core2 /netbsd: azalia0: playback: max channels=6, encodings=1<PCM>
Jul 27 01:57:27 core2core2 /netbsd: azalia0: playback: PCM formats=e007f<24bit,20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
Jul 27 01:57:27 core2core2 /netbsd: azalia0: recording: max channels=2, encodings=1<PCM>
Jul 27 01:57:27 core2core2 /netbsd: azalia0: recording: PCM formats=6007f<20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
Jul 27 01:57:27 core2core2 /netbsd: audio0 at azalia0: full duplex, independent
Jul 27 01:57:27 core2core2 /netbsd: Kernelized RAIDframe activated
Jul 27 01:57:27 core2core2 /netbsd: wd0 at atabus2 drive 0: <WDC WD2000JS-00MHB0>
Jul 27 01:57:27 core2core2 /netbsd: wd0: drive supports 16-sector PIO transfers, LBA48 addressing
Jul 27 01:57:27 core2core2 /netbsd: wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
Jul 27 01:57:27 core2core2 /netbsd: wd0: 32-bit data port
Jul 27 01:57:27 core2core2 /netbsd: wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
Jul 27 01:57:27 core2core2 /netbsd: wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Jul 27 01:57:27 core2core2 /netbsd: boot device: wd0
Jul 27 01:57:27 core2core2 /netbsd: root on wd0a dumps on wd0b
Jul 27 01:57:27 core2core2 /netbsd: root file system type: ffs
Jul 27 01:57:27 core2core2 /netbsd: cpu1: CPU 1 running
Jul 27 01:57:27 core2core2 /netbsd: wsdisplay0: screen 1 added (80x25, vt100 emulation)
Jul 27 01:57:27 core2core2 /netbsd: wsdisplay0: screen 2 added (80x25, vt100 emulation)
Jul 27 01:57:27 core2core2 /netbsd: wsdisplay0: screen 3 added (80x25, vt100 emulation)
Jul 27 01:57:27 core2core2 /netbsd: wsdisplay0: screen 4 added (80x25, vt100 emulation)
Jul 27 01:57:27 core2core2 savecore: no core dump
Jul 27 01:57:29 core2core2 root: /etc/rc: WARNING: sendmail client queue /var/spool/clientmqueue has wrong owner/mode
Jul 27 01:58:44 core2core2 /netbsd:
Jul 27 01:58:44 core2core2 /netbsd: __NetBSD_Version__ = 301000001
Jul 27 01:58:44 core2core2 /netbsd: driver: pci
Jul 27 01:58:44 core2core2 /netbsd: mov0 at pci3
Jul 27 01:58:44 core2core2 /netbsd: : intrstr ioapic0 pin 11 (irq 11) dv_xname mov0
Jul 27 01:58:44 core2core2 /netbsd: Found and attached to a MovMod Device
>How-To-Repeat:
The problem happens as soon as the lkm is loaded for the device. I would assume the problem would occur with all PCI device lkms, however I only have the lkm for my companies PCI card.
>Fix: