Re: kern/38858: intterupt problem

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost,martin%duskware.de@localhost
Subject: Re: kern/38858: intterupt problem
From: Martin Husemann <martin%duskware.de@localhost>
Date: Wed, 4 Jun 2008 19:40:02 +0000 (UTC)
The following reply was made to PR kern/38858; it has been noted by GNATS.

From: Martin Husemann <martin%duskware.de@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: 
Subject: Re: kern/38858: intterupt problem
Date: Wed, 4 Jun 2008 21:37:41 +0200

 Below the dmesg with mp_verbose. Probably I just did not test good enough
 when I claimed PR kern/33922 was fixed.
 
 Martin
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.99.64 (NIGHT-OWL) #4: Wed Jun  4 21:09:58 CEST 2008
        
martin%night-owl.duskware.de@localhost:/usr/src/sys/arch/i386/compile/NIGHT-OWL
 total memory = 1023 MB
 avail memory = 1000 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 Dell Computer Corporation Inspiron 8600                   
 mainbus0 (root)
 mainbus0: scanning 0x9f000 to 0x9f3f0 for MP signature
 mainbus0: scanning 0x9ec00 to 0x9eff0 for MP signature
 mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
 pci_addr_fixup: 000:31:1 0x8086 0x24ca new address 0x40000000
 pci_addr_fixup: 002:01:0 0x104c 0xac44 new address 0x40001000
 cpu0 at mainbus0: Intel 686-class, 1398MHz, id 0x695
 cpu0: Enhanced SpeedStep (1484 mV) 1400 MHz
 cpu0: Enhanced SpeedStep frequencies available (MHz): 1400 1200 1000 800 600
 cpu0: idle lwp at 0xcabe7be0, idle sp at 0xcb33cd28
 acpi0 at mainbus0: Intel ACPICA 20080321
 acpi0: X/RSDT: OemId <DELL  , CPi R  ,27d5061e>, AslId <ASL ,00000061>
 mpacpi: found root PCI bus 0 at level 1
 mpacpi: found subordinate bus 1 at level 2
 mpacpi: found subordinate bus 2 at level 2
 mpacpi: 3 PCI busses
 mpacpi: configuring PCI bus 0 int routing
 LNKA: ACPI: Found matching pin for 0.31.INTA at func 1: 0
 LNKB: ACPI: Found matching pin for 0.31.INTB at func 5: 11
 LNKB: BIOS IRQ 11 for 0.31.INTB is invalid
 LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
 LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
 LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
 LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
 mpacpi: configuring PCI bus 1 int routing
 LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
 mpacpi: configuring PCI bus 2 int routing
 LNKD: ACPI: Found matching pin for 2.1.INTA at func 0: 11
 LNKB: ACPI: Found matching pin for 2.3.INTA at func 0: 11
 LNKB: BIOS IRQ 11 for 2.3.INTA is invalid
 LNKC: ACPI: Found matching pin for 2.0.INTA at func 0: 11
 pic0: pin 0 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
 pic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
 linkdev LNKA attached to pci0 device 31 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
 linkdev LNKB attached to pci0 device 31 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
 linkdev LNKC attached to pci0 device 31 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
 linkdev LNKD attached to pci0 device 31 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
 linkdev LNKA attached to pci0 device 29 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
 linkdev LNKD attached to pci0 device 29 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
 linkdev LNKC attached to pci0 device 29 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
 linkdev LNKH attached to pci0 device 29 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
 linkdev LNKA attached to pci0 device 1 INT_A (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKB attached to pci0 device 1 INT_B (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKA attached to pci1 device 0 INT_A (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKD attached to pci2 device 1 INT_A (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKD attached to pci2 device 1 INT_B (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKB attached to pci2 device 3 INT_A (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKD attached to pci2 device 3 INT_B (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKC attached to pci2 device 0 INT_A (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKB attached to pci2 device 8 INT_A (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 linkdev LNKB attached to pci2 device 8 INT_B (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
 allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
 acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
 acpibat0: battery info: Sanyo, LION, DELL 0002P6 320
 acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
 acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
 acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
 acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
 pckbc0 at acpi0 (PS2M, PNP0F13): aux port
 pckbc0: irq 12
 pckbc1 at acpi0 (KBC, PNP0303): kbd port
 pckbc1: io 0x60,0x64 irq 1
 attimer0 at acpi0 (TMR, PNP0100): AT Timer
 attimer0: io 0x40-0x43,0x50-0x53 irq 0
 SPKR (PNP0800) at acpi0 not configured
 npx0 at acpi0 (COPR, PNP0C04)
 npx0: io 0xf0-0xff irq 13
 npx0: reported by CPUID; using exception 16
 com0 at acpi0 (UAR1, PNP0501)
 com0: io 0x3f8-0x3ff irq 4
 com0: ns16550a, working fifo
 allocated pic pic0 type edge pin 4 level 8 to cpu0 slot 4 idt entry 36
 lpt0 at acpi0 (ECP, PNP0401)
 lpt0: io 0x378-0x37f,0x778-0x77b irq 7 drq 1
 allocated pic pic0 type edge pin 7 level 6 to cpu0 slot 7 idt entry 39
 acpitz0 at acpi0 (THM): critical 90.0C, passive cooling
 pckbd0 at pckbc1 (kbd slot)
 allocated pic pic0 type edge pin 1 level 6 to cpu0 slot 1 idt entry 33
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 allocated pic pic0 type edge pin 12 level 6 to cpu0 slot 12 idt entry 44
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1mainbus0: added to list as bus 0
 
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x8086 product 0x3340 (rev. 0x03)
 agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3341 (rev. 0x03)
 pci1 at ppb0 bus 1ppb0: added to list as bus 1
 
 pci1: i/o space, memory space enabled
 vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0324 (rev. 0xa1)
 wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x01)
 linkdev LNKA returned ACPI global irq 11, line 11
 allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
 uhci0: interrupting at irq 11
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x01)
 linkdev LNKD returned ACPI global irq 11, line 11
 allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
 uhci1: interrupting at irq 11
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x01)
 linkdev LNKC returned ACPI global irq 11, line 11
 allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
 uhci2: interrupting at irq 11
 usb2 at uhci2: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x01)
 linkdev LNKH returned ACPI global irq 11, line 11
 allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
 ehci0: interrupting at irq 11
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
 usb3 at ehci0: USB revision 2.0
 ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x81)
 pci2 at ppb1 bus 2ppb1: added to list as bus 2
 
 pci2: i/o space, memory space enabled
 bce0 at pci2 dev 0 function 0: Broadcom BCM4401 10/100 Ethernet
 linkdev LNKC returned ACPI global irq 11, line 11
 allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
 bce0: interrupting at irq 11
 bmtphy0 at bce0 phy 1: BCM4401 10/100 media interface, rev. 0
 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 bce0: Ethernet address 00:0d:56:af:11:d2
 cbb0 at pci2 dev 1 function 0: vendor 0x104c product 0xac44 (rev. 0x02)
 vendor 0x104c product 0x8029 (Firewire serial bus, interface 0x10) at pci2 dev 
1 function 1 not configured
 ath0 at pci2 dev 3 function 0LNKB: Picked IRQ 9 with weight 0
 linkdev LNKB returned ACPI global irq 9, line 9
 allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41
 
 ath0: interrupting at irq 9
 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
 ath0: mac 5.6 phy 4.1 radio 4.6
 cpu0: remove slot 9 (pic pic0 pin 9 vec 41)
 cbb0: cacheline 0x8 lattimer 0x20
 cbb0: bhlc 0x822008
 linkdev LNKD returned ACPI global irq 11, line 11
 allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
 cbb0: interrupting at irq 11
 cardslot0 at cbb0 slot 0 flags 0
 cardbus0 at cardslot0: bus 3
 pcmcia0 at cardslot0
 pcib0 at pci0 dev 31 function 0
 pcib0: vendor 0x8086 product 0x24cc (rev. 0x01)
 piixide0 at pci0 dev 31 function 1
 piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 allocated pic pic0 type edge pin 14 level 6 to cpu0 slot 14 idt entry 46
 piixide0: primary channel interrupting at irq 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 allocated pic pic0 type edge pin 15 level 6 to cpu0 slot 15 idt entry 47
 piixide0: secondary channel interrupting at irq 15
 atabus1 at piixide0 channel 1
 auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
 linkdev LNKB returned ACPI global irq 9, line 9
 allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41
 auich0: interrupting at irq 9
 auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, 
SigmaTel 3D
 auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
 isa0 at pcib0
 Link Device LNKA:
 Index  IRQ  Rtd  Ref  IRQs
     0   11   Y     4  9 10 11 polarity 1 trigger 0
 
 Link Device LNKB:
 Index  IRQ  Rtd  Ref  IRQs
     0    9   Y     5  5 7 polarity 1 trigger 0
 
 Link Device LNKC:
 Index  IRQ  Rtd  Ref  IRQs
     0   11   Y     3  9 10 11 polarity 1 trigger 0
 
 Link Device LNKD:
 Index  IRQ  Rtd  Ref  IRQs
     0   11   Y     5  5 7 9 10 11 polarity 1 trigger 0
 
 Link Device LNKH:
 Index  IRQ  Rtd  Ref  IRQs
     0   11   Y     1  3 4 5 6 7 9 10 11 12 14 15 polarity 1 trigger 0
 
 cpu0: interrupt masks:
 IPL 0 mask 1ff256d unmask fe00da92
 IPL 1 mask 3ff256d unmask fc00da92
 IPL 2 mask 7ff256d unmask f800da92
 IPL 3 mask fff256d unmask f000da92
 IPL 4 mask 1fff256d unmask e000da92
 IPL 5 mask 3fff256d unmask c000da92
 IPL 6 mask 3fffffef unmask c0000010
 IPL 7 mask 7fffffef unmask 80000010
 IPL 8 mask ffffffff unmask 0
 cpu0 source 1 is pin 1 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
 cpu0 source 4 is pin 4 from pic pic0 maxlevel 8
        handler 0xc015ae20 level 8
 cpu0 source 7 is pin 7 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
 cpu0 source 9 is pin 9 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
 cpu0 source 11 is pin 11 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
        handler 0xc02bc2f4 level 6
 cpu0 source 12 is pin 12 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
 cpu0 source 14 is pin 14 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
 cpu0 source 15 is pin 15 from pic pic0 maxlevel 6
        handler 0xc02bc2f4 level 6
 cpu0 source 25 is pin 0 from pic softintr_fakepic maxlevel 1
        handler 0x0 level 1
 cpu0 source 26 is pin 0 from pic softintr_fakepic maxlevel 2
        handler 0x0 level 2
 cpu0 source 27 is pin 0 from pic softintr_fakepic maxlevel 3
        handler 0x0 level 3
 cpu0 source 28 is pin 0 from pic softintr_fakepic maxlevel 4
        handler 0x0 level 4
 cpu0 source 29 is pin 0 from pic softintr_fakepic maxlevel 5
        handler 0x0 level 5
 cpu0 source 30 is pin 0 from pic lapic maxlevel 7
        handler 0x0 level 7
 cpu0 source 31 is pin 0 from pic lapic maxlevel 8
        handler 0x0 level 8
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 allocated pic pic0 type level pin 0 level 7 to cpu0 slot 0 idt entry 32
 acpiacad0: AC adapter online.
 auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz
 audio0 at auich0: full duplex, mmap, independent
 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub3: 6 ports with 6 removable, self powered
 wd0 at atabus0 drive 0: <SAMSUNG HM120IC>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <SAMSUNG CDRW/DVD SN-324F, , U203> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 boot device: wd0
 root on wd0a dumps on wd0b
 dump_misc_init: max_paddr = 0x3ffae000
 mountroot: trying ffs...
 root file system type: ffs
 init: copying out path `/sbin/init' 11
 allocated pic pic0 type level pin 9 level 6 to cpu0 slot 9 idt entry 41
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
Prev by Date: kern/38858: interrupt problem on dell inspiron 8600
Next by Date: Re: kern/38858 (interrupt problem on dell inspiron 8600)
Previous by Thread: kern/38858: interrupt problem on dell inspiron 8600
Next by Thread: Re: kern/38858 (interrupt problem on dell inspiron 8600)
Indexes:
Home | Main Index | Thread Index | Old Index