Re: port-i386/38548 (AHCISATA does not support WD2500 SATA disk)

[Cem Kayali <cemkayali%eticaret.com.tr@localhost>]

The following reply was made to PR port-i386/38548; it has been noted by GNATS.

From: Cem Kayali <cemkayali%eticaret.com.tr@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: bouyer%NetBSD.org@localhost, gnats-admin%netbsd.org@localhost, 
netbsd-bugs%netbsd.org@localhost
Subject: Re: port-i386/38548 (AHCISATA does not support WD2500 SATA disk)
Date: Thu, 26 Jun 2008 01:54:46 +0300

 Hello!
 
 I have rebooted the notebook several times (at least 20 times) and 
 havent experienced any problem during boot and after boot.
 
 
 Regards,
 
 
 
 Cem Kayali wrote:
 > The following reply was made to PR port-i386/38548; it has been noted by 
 > GNATS.
 >
 > From: Cem Kayali <cemkayali%eticaret.com.tr@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc: 
 > Subject: Re: port-i386/38548 (AHCISATA does not support WD2500 SATA disk)
 > Date: Tue, 24 Jun 2008 15:47:44 +0300
 >
 >  Hello!
 >  
 >  I have just reset the BIOS settings and rebooted NetBSD 4.99.64/i386 AND 
 >  NetBSD 4.99.66/amd64 and didn't encounter with timeout message.
 >  
 >  i386 dmesg is as:
 >  
 >  ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829
 >  ahcisata0: interrupting at ioapic0 pin 19
 >  ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe720e0c0
 >  atabus2 at ahcisata0 channel 0
 >  atabus3 at ahcisata0 channel 1
 >  ahcisata0 port 0: device present, speed: 1.5Gb/s
 >  wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 
 > (Ultra/133) (using DMA)
 >  ahcisata0 port 1: PHY offline
 >  
 >  
 >  
 >  Let me reboot the notebook several times in 2-3 days, and i will let you 
 > know whether there is timeout message.
 >  
 >  
 >  Regards,
 >  Cem
 >  
 >  
 >
 >