NetBSD-Bugs archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]

port-xen/40356 & kern/38011

To: netbsd-bugs%netbsd.org@localhost
Subject: port-xen/40356 & kern/38011
From: Sevan / Venture37 <venture37%gmail.com@localhost>
Date: Sat, 17 Jan 2009 23:47:44 +0000

I have successfully used the patch included in kern/38011 succesfully ona PowerEdge T105 with the DOM0 kernel on NetBSD 5-Beta





updated version of the diff to work with the NetBSD 5 source:

--- sys/dev/pci/viaide.c.orig   2009-01-06 11:34:01.000000000 +0000
+++ sys/dev/pci/viaide.c        2009-01-06 11:37:19.000000000 +0000
@@ -848,6 +848,21 @@
        pciide_mapreg_dma(sc, pa);
        aprint_verbose("\n");

+       /*
+       * enable memory-space access. sometimes memory space is
+       * _not_ enabled so "just do it" to get things going!
+       */
+       {
+       pcireg_t csr;
+       if (pa->pa_memt) {
+               pa->pa_flags |= PCI_FLAGS_MEM_ENABLED;
+               sc->sc_ba5_st = pa->pa_memt;
+       }
+       csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
+       pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
+               csr | PCI_COMMAND_MEM_ENABLE);
+       }
+
        if (sc->sc_dma_ok) {
                sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_UDMA | ATAC_CAP_DMA;
                sc->sc_wdcdev.irqack = pciide_irqack;




Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_BETA (GENERIC) #0: Tue Jan  6 18:54:01 GMT 2009
        venture37@xenhost:/usr/obj/sys/arch/amd64/compile/GENERIC
total memory = 5118 MB
avail memory = 4947 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.5 @ 0xf0b70 (48 entries)
Dell Inc. PowerEdge T105  ((none))
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 2009MHz, id 0x40f33
cpu1 at mainbus0 apid 1: AMD 686-class, 2009MHz, id 0x40f33
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  ,PE_SC3  ,06040000>, AslId <DELL,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
hpet0 at acpi0 (MMTM, PNP0103-0)
hpet0: mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 25000000 Hz quality 2000
attimer1 at acpi0 (PIT0, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPK0, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
COM1 (PNP0501) at acpi0 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok

vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa4) atpci0 dev 0 function 0 not configured

pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x10de product 0x0051 (rev. 0xf1)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0052 (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
LUS0: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x005b (rev. 0xa4)
LUS2: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 7 function 0
viaide0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
LTID: Picked IRQ 22 with weight 0
viaide0: using ioapic0 pin 22 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 8 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSI1: Picked IRQ 23 with weight 0
viaide1: using ioapic0 pin 23 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xf2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 8 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x005d (rev. 0xf3)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 12 function 0: vendor 0x10de product 0x005d (rev. 0xf3)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (rev. 0xf3)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci5 dev 0 function 0: vendor 0x111d product 0x8018 (rev. 0x04)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci6 dev 0 function 0: vendor 0x111d product 0x8018 (rev. 0x04)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci7 dev 0 function 0: Intel PRO/1000 QT (82571EB), rev. 6
LNK3: Picked IRQ 16 with weight 0
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:15:17:
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0

igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,1000baseT-FDX, auto

wm1 at pci7 dev 0 function 1: Intel PRO/1000 QT (82571EB), rev. 6
LNK4: Picked IRQ 17 with weight 0
wm1: interrupting at ioapic0 pin 17
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:15:17:
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0

igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,1000baseT-FDX, auto

ppb7 at pci6 dev 1 function 0: vendor 0x111d product 0x8018 (rev. 0x04)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci8 dev 0 function 0: Intel PRO/1000 QT (82571EB), rev. 6
wm2: interrupting at ioapic0 pin 17
wm2: PCI-Express bus
wm2: 65536 word (16 address bits) SPI EEPROM
wm2: Ethernet address 00:15:17:
igphy2 at wm2 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0

igphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,1000baseT-FDX, auto

wm3 at pci8 dev 0 function 1: Intel PRO/1000 QT (82571EB), rev. 6
LNK1: Picked IRQ 18 with weight 0
wm3: interrupting at ioapic0 pin 18
wm3: PCI-Express bus
wm3: 65536 word (16 address bits) SPI EEPROM
wm3: Ethernet address 00:15:17:
igphy3 at wm3 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0

igphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,1000baseT-FDX, auto

pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1102 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (K8: core rev JH-F3, socket AM2)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
viaide0 port 0: device present, speed: 3.0Gb/s
viaide0 port 1: device present, speed: 3.0Gb/s
viaide1 port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <WDC WD800JD-75MSA3>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing

wd0: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000sectors

wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0: <WDC WD800JD-75MSA3>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing

wd1: 76293 MB, 155009 cyl, 16 head, 63 sec, 512 bytes/sect x 156250000sectors

wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus2: 2 targets

cd0 at atapibus0 drive 0: <TSSTcorp CD-RW/DVD-ROM TS-H493B, , D200>cdrom removable

cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs

uhub2 at uhub0 port 3: Alps Electric Hub in Apple USB Keyboard, class9/0, rev 1.10/2.10, addr 2

uhub2: 3 ports with 2 removable, bus powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Alps Electric Apple USB Keyboard, rev 1.10/1.03, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)






Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_BETA (XEN3_DOM0) #0: Tue Jan  6 19:07:26 GMT 2009
        venture37@xenhost:/usr/obj/sys/arch/amd64/compile/XEN3_DOM0
total memory = 65536 KB
avail memory = 49828 KB
timecounter: Timecounters tick every 10.000 msec
SMBIOS rev. 2.5 @ 0xf0b70 (48 entries)
mainbus0 (root)
mainbus0: scanning 0x9dc00 to 0x9dff0 for MP signature
mainbus0: scanning 0x9d800 to 0x9dbf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf7a70
mainbus0: MP config table at 0x9e171, 292 bytes long
cpu0 at mainbus0 apid 0: (boot processor)
cpu1 at mainbus0 apid 1: (application processor)

ioapic0 at mainbus0 apid 2: pa 0xfec00000, virtual wire mode, version11, 24 pins

hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: AMD 686-class, 2009MHz, id 0x40f33
debug virtual interrupt using event channel 1
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
acpi0 at hypervisor0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  ,PE_SC3  ,06040000>, AslId <DELL,00000000>
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 5 at level 2
mpacpi: found subordinate bus 4 at level 2
mpacpi: found subordinate bus 3 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: 6 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (1/1)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus 4 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 2 int routing

ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=ActHi,trig=1=Edge>)

ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags 0<pol=0,trig=0>)

ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags0<pol=0,trig=0>)ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags0<pol=0,trig=0>)ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags0<pol=0,trig=0>)ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags0<pol=0,trig=0>)ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags0<pol=0,trig=0>)ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags0<pol=0,trig=0>)

local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)

linkdev LSMB attached to pci0 device 1 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LSMB attached to pci0 device 1 INT_B (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LUS0 attached to pci0 device 2 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LUS2 attached to pci0 device 2 INT_B (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LACI attached to pci0 device 4 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LMCI attached to pci0 device 4 INT_B (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LPID attached to pci0 device 6 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LTID attached to pci0 device 7 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LSI1 attached to pci0 device 8 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK4 attached to pci1 device 7 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK1 attached to pci1 device 7 INT_B (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK2 attached to pci1 device 7 INT_C (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK3 attached to pci1 device 7 INT_D (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK1 attached to pci1 device 8 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK3 attached to pci5 device 0 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK4 attached to pci5 device 0 INT_B (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK1 attached to pci5 device 0 INT_C (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK2 attached to pci5 device 0 INT_D (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK4 attached to pci4 device 0 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK1 attached to pci4 device 0 INT_B (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK2 attached to pci4 device 0 INT_C (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK3 attached to pci4 device 0 INT_D (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK1 attached to pci3 device 0 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK2 attached to pci3 device 0 INT_B (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK3 attached to pci3 device 0 INT_C (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK4 attached to pci3 device 0 INT_D (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK2 attached to pci2 device 0 INT_A (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK3 attached to pci2 device 0 INT_B (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK4 attached to pci2 device 0 INT_C (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)linkdev LNK1 attached to pci2 device 0 INT_D (type 0<type=0> flagsf<pol=3=Act Lo,trig=3=Level>)ioapic0: int91a9a0<vector=a0,delmode=1,logical,actlo,level,masked,dest=0>3000000<target=3>

acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MMTM (PNP0103) [HPET Timer] at acpi0 not configured
PIT0 (PNP0100) [AT Timer] at acpi0 not configured
pcppi0 at acpi0 (SPK0, PNP0800)
pcppi0: io 0x61
COM1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled

vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa4) atpci0 dev 0 function 0 not configured

pcib0 at pci0 dev 1 function 0
pcib0: vendor 0x10de product 0x0051 (rev. 0xf1)

vendor 0x10de product 0x0052 (SMBus serial bus, revision 0xa2) at pci0dev 1 function 1 not configured

ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
LUS0: Picked IRQ 20 with weight 0
linkdev LUS0 returned ACPI global irq 20, line 20

ioapic0: int201a9a8<vector=a8,delmode=1,logical,actlo,level,masked,dest=0>3000000<target=3>

ohci0: interrupting at ioapic0 pin 20, event channel 3
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x005b (rev. 0xa4)
LUS2: Picked IRQ 21 with weight 0
linkdev LUS2 returned ACPI global irq 21, line 21

ioapic0: int211a9b0<vector=b0,delmode=1,logical,actlo,level,masked,dest=0>3000000<target=3>

ehci0: interrupting at ioapic0 pin 21, event channel 4
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
viaide0 at pci0 dev 7 function 0
viaide0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
LTID: Picked IRQ 22 with weight 0
linkdev LTID returned ACPI global irq 22, line 22

ioapic0: int221a9b8<vector=b8,delmode=1,logical,actlo,level,masked,dest=0>3000000<target=3>

viaide0: using ioapic0 pin 22, event channel 5 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 8 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
LSI1: Picked IRQ 23 with weight 0
linkdev LSI1 returned ACPI global irq 23, line 23

ioapic0: int231a9c0<vector=c0,delmode=1,logical,actlo,level,masked,dest=0>3000000<target=3>

viaide1: using ioapic0 pin 23, event channel 6 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xf2)
pci1 at ppb0 bus 1
ppb0: added to list as bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 8 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x005d (rev. 0xf3)
pci2 at ppb1 bus 2
ppb1: added to list as bus 2
pci2: i/o space, memory space enabled
ppb2 at pci0 dev 12 function 0: vendor 0x10de product 0x005d (rev. 0xf3)
pci3 at ppb2 bus 3
ppb2: added to list as bus 3
pci3: i/o space, memory space enabled
ppb3 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (rev. 0xf3)
pci4 at ppb3 bus 4
ppb3: added to list as bus 4
pci4: i/o space, memory space enabled
ppb4 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
pci5 at ppb4 bus 5
ppb4: added to list as bus 5
pci5: i/o space, memory space enabled
ppb5 at pci5 dev 0 function 0: vendor 0x111d product 0x8018 (rev. 0x04)
pci6 at ppb5 bus 6
ppb5: added to list as bus 6
pci6: i/o space, memory space enabled
ppb6 at pci6 dev 0 function 0: vendor 0x111d product 0x8018 (rev. 0x04)
pci7 at ppb6 bus 7
ppb6: added to list as bus 7
pci7: i/o space, memory space enabled
wm0 at pci7 dev 0 function 0: Intel PRO/1000 QT (82571EB), rev. 6
LNK3: Picked IRQ 16 with weight 0
linkdev LNK3 returned ACPI global irq 16, line 16

ioapic0: int161a9c8<vector=c8,delmode=1,logical,actlo,level,masked,dest=0>3000000<target=3>

wm0: interrupting at ioapic0 pin 16, event channel 7
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:15:17:
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0

igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,1000baseT-FDX, auto

wm1 at pci7 dev 0 function 1: Intel PRO/1000 QT (82571EB), rev. 6
LNK4: Picked IRQ 17 with weight 0
linkdev LNK4 returned ACPI global irq 17, line 17

ioapic0: int171a9d0<vector=d0,delmode=1,logical,actlo,level,masked,dest=0>3000000<target=3>

wm1: interrupting at ioapic0 pin 17, event channel 8
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:15:17:
igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0