kern/40488: Unable to reboot Dell PE 2970

[mbowie%buzmo.com@localhost]

>Number:         40488
>Category:       kern
>Synopsis:       Unable to reboot Dell PE 2970
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Jan 26 22:45:00 +0000 2009
>Originator:     Mike Bowie
>Release:        4.0.1 and 5.0_BETA (20090125)
>Organization:
Buzmo Solutions, LLC
>Environment:
NetBSD  5.0_BETA NetBSD 5.0_BETA (GENERIC) #0: Sun Jan 25 09:25:11 PST 2009  
builds@wb29:/home/builds/ab/netbsd-5/amd64/200901250002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/amd64/compile/GENERIC
 amd64

>Description:
Running a fresh install of either 4.0.1 or 5.0_BETA (from 20090125) on a Dell 
PowerEdge 2970 (BIOS 3.0.3).  Issuing a reboot or "shutdown -r now" results in 
the machine hanging indefinitely after unmounting the local filesystems.  A 
test installation of FreeBSD on the same system reboots successfully.  Testing 
with both ACPI and ACPI / SMP disabled yields the same results.  There are no 
ACPI tunables in the BIOS.

# dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_BETA (GENERIC) #0: Sun Jan 25 09:25:11 PST 2009
        
builds@wb29:/home/builds/ab/netbsd-5/amd64/200901250002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/amd64/compile/GENERIC
total memory = 4090 MB
avail memory = 3950 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.4 @ 0xd7bbc000 (55 entries)
Dell Inc. PowerEdge 2970
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD 686-class, 1695MHz, id 0x100f23
cpu1 at mainbus0 apid 4: AMD 686-class, 1695MHz, id 0x100f23
cpu2 at mainbus0 apid 1: AMD 686-class, 1695MHz, id 0x100f23
cpu3 at mainbus0 apid 5: AMD 686-class, 1695MHz, id 0x100f23
cpu4 at mainbus0 apid 2: AMD 686-class, 1695MHz, id 0x100f23
cpu5 at mainbus0 apid 6: AMD 686-class, 1695MHz, id 0x100f23
cpu6 at mainbus0 apid 3: AMD 686-class, 1695MHz, id 0x100f23
cpu7 at mainbus0 apid 7: AMD 686-class, 1695MHz, id 0x100f23
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 9: pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 10: pa 0xfec02000, version 11, 16 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  ,PE_SC3  ,00000001>, AslId <DELL,00000001>
LK01: ACPI: Found matching pin for 0.3.INTA at func 0: 11
LK07: ACPI: Found matching pin for 10.14.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 32-bit timer
pcppi1 at acpi0 (SPK, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x5f irq 0
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
attimer1: attached to pcppi1
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 1 function 0: vendor 0x1166 product 0x0036 (rev. 0x00)
pci1 at ppb0 bus 10
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 13 function 0: vendor 0x1166 product 0x0104 (rev. 0xc0)
pci2 at ppb1 bus 11
pci2: i/o space, memory space enabled
svwsata0 at pci1 dev 14 function 0
svwsata0: ServerWorks HT-1000 SATA Controller (rev. 0x00)
svwsata0: bus-master DMA support present
svwsata0: using ioapic0 pin 11 for native-PCI interrupt
svwsata0: primary channel wired to native-PCI mode
atabus0 at svwsata0 channel 0
svwsata0: secondary channel wired to native-PCI mode
atabus1 at svwsata0 channel 1
svwsata0: secondary channel wired to compatibility mode
atabus2 at svwsata0 channel 2
svwsata0: secondary channel configured to compatibility mode
atabus3 at svwsata0 channel 3
piixpm0 at pci0 dev 2 function 0
piixpm0: vendor 0x1166 product 0x0205 (rev. 0x00)
piixpm0: polling
iic0 at piixpm0: I2C bus
pcib0 at pci0 dev 2 function 2
pcib0: vendor 0x1166 product 0x0234 (rev. 0x00)
ohci0 at pci0 dev 3 function 0: vendor 0x1166 product 0x0223 (rev. 0x01)
ohci0: interrupting at ioapic0 pin 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 3 function 1: vendor 0x1166 product 0x0223 (rev. 0x01)
ohci1: interrupting at ioapic0 pin 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 3 function 2: vendor 0x1166 product 0x0223 (rev. 0x01)
ehci0: interrupting at ioapic0 pin 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
vga0 at pci0 dev 4 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb2 at pci0 dev 7 function 0: vendor 0x1166 product 0x0140 (rev. 0xa2)
pci3 at ppb2 bus 12
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 8 function 0: vendor 0x1166 product 0x0142 (rev. 0xa2)
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 9 function 0: vendor 0x1166 product 0x0144 (rev. 0xa2)
pci5 at ppb4 bus 1
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci5 dev 0 function 0: vendor 0x10b5 product 0x8518 (rev. 0xac)
pci6 at ppb5 bus 2
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci6 dev 1 function 0: vendor 0x10b5 product 0x8518 (rev. 0xac)
pci7 at ppb6 bus 3
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci7 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
ppb7: disabling notification events
pci8 at ppb7 bus 4
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
bnx0 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx0: Ethernet address 00:22:19:53:d8:a3
brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb8 at pci6 dev 2 function 0: vendor 0x10b5 product 0x8518 (rev. 0xac)
pci9 at ppb8 bus 5
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci9 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
ppb9: disabling notification events
pci10 at ppb9 bus 6
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
bnx1 at pci10 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx1: Ethernet address 00:22:19:53:d8:a5
brgphy1 at bnx1 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb10 at pci6 dev 3 function 0: vendor 0x10b5 product 0x8518 (rev. 0xac)
pci11 at ppb10 bus 7
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
ppb11 at pci11 dev 0 function 0: vendor 0x8086 product 0x0370 (rev. 0x00)
ppb11: disabling notification events
pci12 at ppb11 bus 8
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
mfi0 at pci12 dev 14 function 0: Dell PERC 5/i integrated
mfi0: interrupting at ioapic1 pin 5
mfi0: logical drives 1, version 5.2.2-0072, 256MB RAM
scsibus0 at mfi0: 64 targets, 8 luns per target
ppb12 at pci11 dev 0 function 2: vendor 0x8086 product 0x0372 (rev. 0x00)
ppb12: disabling notification events
pci13 at ppb12 bus 9
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
ppb13 at pci0 dev 10 function 0: vendor 0x1166 product 0x0142 (rev. 0xa2)
pci14 at ppb13 bus 14
pci14: i/o space, memory space enabled, rd/line, wr/inv ok
ppb14 at pci0 dev 11 function 0: vendor 0x1166 product 0x0144 (rev. 0xa2)
pci15 at ppb14 bus 15
pci15: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 24 function 0
pchb0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb3 at pci0 dev 24 function 4
pchb3: vendor 0x1022 product 0x1204 (rev. 0x00)
pchb4 at pci0 dev 25 function 0
pchb4: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb5 at pci0 dev 25 function 1
pchb5: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb6 at pci0 dev 25 function 2
pchb6: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp1 at pci0 dev 25 function 3
amdtemp1: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb7 at pci0 dev 25 function 4
pchb7: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com1: console
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1695893410 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb1: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1166 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
svwsata0 port 1: device present, speed: 1.5Gb/s
svwsata0 port 3: PHY offline
svwsata0 port 2: PHY offline
svwsata0 port 0: PHY offline
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TEAC DVD-ROM DV28SV, 08092215145441, D.0J> cdrom 
removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(svwsata0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub3 at uhub2 port 1: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, 
addr 2
uhub3: multiple transaction translators
sd0 at scsibus0 target 0 lun 0: <DELL, PERC 5/i, 1.03> disk fixed
uhub3: 2 ports with 2 removable, self powered
sd0: fabricating a geometry
sd0: 929 GB, 951808 cyl, 64 head, 32 sec, 512 bytes/sect x 1949302784 sectors
sd0: fabricating a geometry
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub4 at uhub2 port 4: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, 
addr 4
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
uhub5 at uhub4 port 1: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, 
addr 5
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
ipmi0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
mfi0: normal state on 'mfi0:0' (online)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
# uname -a
NetBSD  5.0_BETA NetBSD 5.0_BETA (GENERIC) #0: Sun Jan 25 09:25:11 PST 2009  
builds@wb29:/home/builds/ab/netbsd-5/amd64/200901250002Z-obj/home/builds/ab/netbsd-5/src/sys/arch/amd64/compile/GENERIC
 amd64
# shutdown -r now
Shutdown NOW!
shutdown: [pid 264]
# wall: You have write permission turned off; no reply possible
                                                                               
*** FINAL System shutdown message from root@ ***                             
System going down IMMEDIATELY                                                  
                                                                               
                                                                               
Jan 26 16:34:23  shutdown: reboot by root: 

System shutdown time has arrived

About to run shutdown hooks...
Stopping cron.
Stopping inetd.
Waiting for PIDS: 250.
Removing block-type swap devices
swapctl: removing /dev/sd0b as swap device
Mon Jan 26 16:34:27 UTC 2009

Done running shutdown hooks.
Jan 26 16:34:32  syslogd: Exiting on signal 15
syncing disks... done
unmounting file systems... done
                               rebooting...

>How-To-Repeat:
Issue a reboot or "shutdown -r now" on a Dell PE 2970.
>Fix: