Mouse is not running in X when wsmoused=YES in /etc/rc.conf

[TomÃÅ BodÅÃr <tomas.bodzar%gmail.com@localhost>]

Hi all,

when I set wsmoused=YES in /etc/rc.conf then I have support for mouse
in console but my pointer isn't running in X. wscons.conf is unchanged
after installation.

000:00:0: Intel 82GM45 Host Bridge (host bridge, revision 0x07)
000:02:0: Intel 82GM45 Integrated Graphics Device (VGA display, revision 0x07)
000:02:1: Intel 82GM45 Integrated Graphics Device (miscellaneous
display, revision 0x07)
000:25:0: Intel 82801I Mobile (AMT) LAN Controller (ethernet network,
revision 0x03)
000:26:0: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:26:1: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:26:2: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:26:7: Intel 82801I USB EHCI Controller (USB serial bus, interface
0x20, revision 0x03)
000:27:0: Intel 82801I High Definition Audio Controller (multimedia
subclass 0x03, revision 0x03)
000:28:0: Intel 82801I PCI Express Port #1 (PCI bridge, revision 0x03)
000:28:1: Intel 82801I PCI Express Port #2 (PCI bridge, revision 0x03)
000:28:2: Intel 82801I PCI Express Port #3 (PCI bridge, revision 0x03)
000:29:0: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:29:1: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:29:2: Intel 82801I USB UHCI Controller (USB serial bus, revision 0x03)
000:29:7: Intel 82801I USB EHCI Controller (USB serial bus, interface
0x20, revision 0x03)
000:30:0: Intel 82801BAM Hub-PCI Bridge (PCI bridge, interface 0x01,
revision 0x93)
000:31:0: Intel 82801IEM LPC Interface Bridge (ISA bridge, revision 0x03)
000:31:2: Intel 82801I Mobile AHCI SATA Controller with 2 ports (IDE
mass storage, interface 0x8f, revision 0x03)
000:31:3: Intel 82801I SMBus Controller (SMBus serial bus, revision 0x03)
000:31:5: Intel product 0x292d (IDE mass storage, interface 0x85, revision 0x03)


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (GENERIC) #0: Sun Oct 11 05:22:33 UTC 2009
        
builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5/i386/200910110000Z-obj/home/builds/ab/netbsd-5/src/sys/arch/i386/compile/GENERIC
total memory = 3535 MB
avail memory = 3462 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. Latitude E6400
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2394MHz, id 0x10676
cpu0: Enhanced SpeedStep (1212 mV) 900 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 7300 7000 6600
6200 5800 5400 5000 4600 4200 3800 3400 3000 2600 2200 1800 1500 1100
700
cpu1 at mainbus0 apid 1: Intel 686-class, 2394MHz, id 0x10676
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  , M09    ,27d9020d>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
DIGC (PNP0501) at acpi0 not configured
acpiec0 at acpi0 (ECDV, PNP0C09-0): io 0x930,0x934
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
acpibat0: battery info: Samsung SDI, LION, DELL MP4948B 36706
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
AMW0 (pnp0c14) at acpi0 not configured
acpitz0 at acpi0 (THM): critical 107.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a40 (rev. 0x07)
agp0 at pchb0: detected 32764k stolen memory
agp0: aperture at 0xe0000000, size 0x10000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at
pci0 dev 2 function 1 not configured
wm0 at pci0 dev 25 function 0: 82801I mobile (AMT) LAN Controller, rev. 3
wm0: interrupting at ioapic0 pin 22
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address myMAC
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 26 function 2: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 22
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 21
azalia0: host: 0x8086/0x293e (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
ppb0: disabling notification events
pci1 at ppb0 bus 11
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x03)
ppb1: disabling notification events
pci2 at ppb1 bus 12
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x4232 (miscellaneous network) at pci2 dev 0
function 0 not configured
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2944 (rev. 0x03)
ppb2: disabling notification events
pci3 at ppb2 bus 13
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci3 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 22
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci4 at ppb3 bus 3
pci4: i/o space, memory space enabled
cbb0 at pci4 dev 1 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
fwohci0 at pci4 dev 1 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 MAC
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x1180 product 0x0822 (SD Host Controller system, interface
0x01, revision 0x21) at pci4 dev 1 function 2 not configured
vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x11) at
pci4 dev 1 function 3 not configured
cbb0: bad Vcc request. sock_ctrl 0xfffeff88, sock_status 0xffbfffff
cbb0: disabling socket
new status 0xffbfffff
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: interrupting at ioapic0 pin 19
cardslot0 at cbb0
cardbus0 at cardslot0: bus 4
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2917 (rev. 0x03)
pciide0 at pci0 dev 31 function 2
pciide0: vendor 0x8086 product 0x2928 (rev. 0x03)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 19 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus1 at pciide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
pciide1 at pci0 dev 31 function 5
pciide1: vendor 0x8086 product 0x292d (rev. 0x03)
pciide1: bus-master DMA support present, but unused (no driver support)
pciide1: primary channel wired to native-PCI mode
pciide1: using ioapic0 pin 19 for native-PCI interrupt
atabus2 at pciide1 channel 0
pciide1: secondary channel wired to native-PCI mode
atabus3 at pciide1 channel 1
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, Not found IRM capable node
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
azalia0: codec[0]: 0x111d/0x76b2 (rev. 3.2), HDA rev. 1.0
azalia0: codec[2]: 0x8086/0x2802 (rev. 0.0), HDA rev. 1.0
audio0 at azalia0: full duplex, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 6 ports with 6 removable, self powered
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: vendor 0x0461 DELL Laser Mouse, rev 2.00/7.17, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhub8 at uhub0 port 1: Broadcom BCM2046B1, class 9/0, rev 2.00/1.00, addr 2
uhub8: 3 ports with 0 removable, self powered
wd0 at atabus0 drive 0uvideo0 at uhub3 port 6 configuration 1
interface 0: <Hitachi HTS723280L9A362>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
: CN0TX5937248792101KJ Laptop_Integrated_Webcam_0.3M, rev 2.00/88.06, addr 2
video0 at uvideo0: CN0TX5937248792101KJ Laptop_Integrated_Webcam_0.3M,
rev 2.00/88.06, addr 2
ugen0 at uhub2 port 1
ugen0: Broadcom Corp 5880, rev 1.10/1.01, addr 2
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
uhidev1 at uhub8 port 1 configuration 1 interface 0
uhidev1: vendor 0x413c product 0x8157, rev 2.00/1.00, addr 3, iclass 3/1
uhidev1: 1 report ids
ukbd0 at uhidev1 reportid 1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub8 port 2 configuration 1 interface 0
uhidev2: vendor 0x413c product 0x8158, rev 2.00/1.00, addr 4, iclass 3/1
uhidev2: 125 report ids
ums1 at uhidev2 reportid 2: 3 buttons
wsmouse2 at ums1 mux 0
uhid0 at uhidev2 reportid 125: input=2, output=0, feature=0
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp DVD+/-RW TS-U633A, , D200> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)