Re: kern/42205: kernel panic at activated userquota

[6bone%6bone.informatik.uni-leipzig.de@localhost]

The following reply was made to PR kern/42205; it has been noted by GNATS.

From: 6bone%6bone.informatik.uni-leipzig.de@localhost
To: gnats-bugs%NetBSD.org@localhost
Cc: kern-bug-people%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, 
netbsd-bugs%netbsd.org@localhost
Subject: Re: kern/42205: kernel panic  at activated userquota
Date: Sat, 21 Nov 2009 19:13:37 +0100 (CET)

 On Sat, 21 Nov 2009, Manuel Bouyer wrote:
 > Hum, can you send the dmesg and 'cpuctl identify cpu0' for this machine ?
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
      2006, 2007, 2008, 2009
      The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
 NetBSD 5.0_STABLE (MYCONF) #0: Thu Nov 12 13:17:15 CET 2009
        
root%6bone.informatik.uni-leipzig.de@localhost:/usr/obj/sys/arch/amd64/compile/MYCONF
 total memory = 16378 MB
 avail memory = 15865 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 SMBIOS rev. 2.5 @ 0xbfb9c000 (66 entries)
 Dell Inc. PowerEdge 1950
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel 686-class, 1995MHz, id 0x6f6
 cpu1 at mainbus0 apid 6: Intel 686-class, 1995MHz, id 0x6f6
 cpu2 at mainbus0 apid 1: Intel 686-class, 1995MHz, id 0x6f6
 cpu3 at mainbus0 apid 7: Intel 686-class, 1995MHz, id 0x6f6
 ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
 ioapic1 at mainbus0 apid 9: pa 0xfec81000, version 20, 24 pins
 acpi0 at mainbus0: Intel ACPICA 20080321
 acpi0: X/RSDT: OemId <DELL  ,PE_SC3  ,00000001>, AslId <DELL,00000001>
 acpi0: SCI interrupting at int 9
 acpi0: fixed-feature power button present
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
 COMA (PNP0501) at acpi0 not configured
 COMB (PNP0501) at acpi0 not configured
 hpet0 at acpi0 (HPET, PNP0103-0): mem 0xfed00000-0xfed003ff
 timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
 ipmi0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: vendor 0x8086 product 0x25c0 (rev. 0x12)
 ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25e2 (rev. 0x12)
 pci1 at ppb0 bus 6
 pci1: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
 pci2 at ppb1 bus 7
 pci2: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
 pci3 at ppb2 bus 8
 pci3: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb3 at pci2 dev 1 function 0: vendor 0x8086 product 0x3514 (rev. 0x01)
 pci4 at ppb3 bus 10
 pci4: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb4 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
 ppb4: disabling notification events
 pci5 at ppb4 bus 11
 pci5: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb5 at pci0 dev 3 function 0: vendor 0x8086 product 0x25e3 (rev. 0x12)
 pci6 at ppb5 bus 1
 pci6: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb6 at pci6 dev 0 function 0: vendor 0x8086 product 0x0370 (rev. 0x00)
 ppb6: disabling notification events
 pci7 at ppb6 bus 2
 pci7: i/o space, memory space enabled, rd/line, wr/inv ok
 mfi0 at pci7 dev 14 function 0: Dell PERC 5/i integrated
 mfi0: interrupting at ioapic1 pin 14
 mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM
 scsibus0 at mfi0: 64 targets, 8 luns per target
 ppb7 at pci6 dev 0 function 2: vendor 0x8086 product 0x0372 (rev. 0x00)
 ppb7: disabling notification events
 pci8 at ppb7 bus 3
 pci8: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb8 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0x12)
 pci9 at ppb8 bus 12
 pci9: i/o space, memory space enabled, rd/line, wr/inv ok
 wm0 at pci9 dev 0 function 0: Intel PRO/1000 PT (82571EB), rev. 6
 wm0: interrupting at ioapic0 pin 16
 wm0: PCI-Express bus
 wm0: 65536 word (16 address bits) SPI EEPROM
 wm0: Ethernet address 00:15:17:0e:98:5e
 igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
 igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 wm1 at pci9 dev 0 function 1: Intel PRO/1000 PT (82571EB), rev. 6
 wm1: interrupting at ioapic0 pin 17
 wm1: PCI-Express bus
 wm1: 65536 word (16 address bits) SPI EEPROM
 wm1: Ethernet address 00:15:17:0e:98:5f
 igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
 igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ppb9 at pci0 dev 5 function 0: vendor 0x8086 product 0x25e5 (rev. 0x12)
 pci10 at ppb9 bus 13
 pci10: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb10 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0x12)
 pci11 at ppb10 bus 14
 pci11: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb11 at pci11 dev 0 function 0: vendor 0x8086 product 0x0330 (rev. 0x07)
 ppb11: disabling notification events
 pci12 at ppb11 bus 15
 pci12: i/o space, memory space enabled, rd/line, wr/inv ok
 amr0 at pci12 dev 14 function 0: AMI RAID <PERC 4e/DC>
 amr0: interrupting at ioapic0 pin 18
 amr0: firmware 522A, BIOS H430, 128MB RAM
 ld0 at amr0 unit 0: RAID 0, optimal
 ld0: 1629 GB, 212749 cyl, 255 head, 63 sec, 512 bytes/sect x 3417825280 sectors
 ld1 at amr0 unit 1: RAID 0, optimal
 ld1: 1630 GB, 212847 cyl, 255 head, 63 sec, 512 bytes/sect x 3419402240 sectors
 ld2 at amr0 unit 2: RAID 0, optimal
 ld2: 1396 GB, 182350 cyl, 255 head, 63 sec, 512 bytes/sect x 2929459200 sectors
 ld3 at amr0 unit 3: RAID 0, optimal
 ld3: 1862 GB, 243149 cyl, 255 head, 63 sec, 512 bytes/sect x 3906191360 sectors
 ld4 at amr0 unit 4: RAID 0, optimal
 ld4: 1396 GB, 182350 cyl, 255 head, 63 sec, 512 bytes/sect x 2929459200 sectors
 ppb12 at pci11 dev 0 function 2: vendor 0x8086 product 0x0332 (rev. 0x07)
 ppb12: disabling notification events
 pci13 at ppb12 bus 16
 pci13: i/o space, memory space enabled, rd/line, wr/inv ok
 ppb13 at pci0 dev 7 function 0: vendor 0x8086 product 0x25e7 (rev. 0x12)
 pci14 at ppb13 bus 17
 pci14: i/o space, memory space enabled, rd/line, wr/inv ok
 pchb1 at pci0 dev 16 function 0
 pchb1: vendor 0x8086 product 0x25f0 (rev. 0x12)
 pchb2 at pci0 dev 16 function 1
 pchb2: vendor 0x8086 product 0x25f0 (rev. 0x12)
 pchb3 at pci0 dev 16 function 2
 pchb3: vendor 0x8086 product 0x25f0 (rev. 0x12)
 pchb4 at pci0 dev 17 function 0
 pchb4: vendor 0x8086 product 0x25f1 (rev. 0x12)
 pchb5 at pci0 dev 19 function 0
 pchb5: vendor 0x8086 product 0x25f3 (rev. 0x12)
 pchb6 at pci0 dev 21 function 0
 pchb6: vendor 0x8086 product 0x25f5 (rev. 0x12)
 pchb7 at pci0 dev 22 function 0
 pchb7: vendor 0x8086 product 0x25f6 (rev. 0x12)
 ppb14 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
 pci15 at ppb14 bus 4
 pci15: i/o space, memory space enabled, rd/line, wr/inv ok
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
 uhci0: interrupting at ioapic0 pin 21
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
 uhci1: interrupting at ioapic0 pin 20
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
 uhci2: interrupting at ioapic0 pin 21
 usb2 at uhci2: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
 ehci0: interrupting at ioapic0 pin 21
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
 usb3 at ehci0: USB revision 2.0
 ppb15 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
 pci16 at ppb15 bus 18
 pci16: i/o space, memory space enabled
 vga0 at pci16 dev 13 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
 wsdisplay0 at vga0 kbdmux 1
 wsmux1: connecting to wsdisplay0
 drm at vga0 not configured
 ichlpcib0 at pci0 dev 31 function 0
 ichlpcib0: vendor 0x8086 product 0x2670 (rev. 0x09)
 timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
 ichlpcib0: 24-bit timer
 ichlpcib0: TCO (watchdog) timer configured.
 piixide0 at pci0 dev 31 function 1
 piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel ignored (disabled)
 isa0 at ichlpcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com0: console
 com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi0
 attimer1: attached to pcppi0
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 timecounter: Timecounter "TSC" frequency 1995111120 Hz quality 3000
 scsibus0: waiting 2 seconds for devices to settle...
 atapibus0 at atabus0: 2 targets
 uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD-ROM GCC-4244N, , B101> cdrom 
removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
 uhub2 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 6 ports with 6 removable, self powered
 uhub3 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3: 2 ports with 2 removable, self powered
 uhub4 at uhub2 port 1: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, 
addr 2
 uhub4: multiple transaction translators
 sd0 at scsibus0 target 0 lun 0: <DELL, PERC 5/i, 1.03> disk fixed
 uhub4: 2 ports with 2 removable, self powered
 sd0: fabricating a geometry
 sd0: 136 GB, 139300 cyl, 64 head, 32 sec, 512 bytes/sect x 285286400 sectors
 sd0: fabricating a geometry
 uhidev0 at uhub4 port 1 configuration 1 interface 0
 uhidev0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
 ukbd0 at uhidev0
 wskbd0 at ukbd0 mux 1
 wskbd0: connecting to wsdisplay0
 uhidev1 at uhub4 port 1 configuration 1 interface 1
 uhidev1: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
 ums0 at uhidev1
 ums0: X report 0x0002 not supported
 umass0 at uhub4 port 2 configuration 1 interface 0
 umass0: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4
 umass0: using SCSI over Bulk-Only
 scsibus1 at umass0: 2 targets, 1 lun per target
 umass1 at uhub4 port 2 configuration 1 interface 1cd1 at scsibus1 target 0 lun 
0: <Dell, Virtual  CDROM, 123> cdrom removable
 
 umass1: DELL  INC. DRAC5 VIRTUAL  MEDIA, rev 2.00/0.00, addr 4
 umass1: using SCSI over Bulk-Only
 scsibus2 at umass1: 2 targets, 1 lun per target
 sd1 at scsibus2 target 0 lun 0: <Dell, Virtual  Floppy, 123> disk removable
 sd1: drive offline
 sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
      SENSE KEY:  Not Ready
       ASC/ASCQ:  Medium Not Present
 
 sd1: unable to open device, error = 19
 uhub5 at uhub2 port 5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, 
addr 5
 uhub5: multiple transaction translators
 uhub5: 4 ports with 4 removable, self powered
 uhidev2 at uhub1 port 1 configuration 1 interface 0
 uhidev2: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
 ukbd1 at uhidev2
 wskbd1 at ukbd1 mux 1
 wskbd1: connecting to wsdisplay0
 uhidev3 at uhub1 port 1 configuration 1 interface 1
 uhidev3: CHESEN PS2 to USB Converter, rev 1.10/0.10, addr 2, iclass 3/1
 uhidev3: 3 report ids
 ums1 at uhidev3 reportid 1: 5 buttons and Z dir.
 wsmouse0 at ums1 mux 0
 uhid0 at uhidev3 reportid 2: input=1, output=0, feature=0
 uhid1 at uhidev3 reportid 3: input=3, output=0, feature=0
 ipmi0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
 Kernelized RAIDframe activated
 pad0: outputs: 44100Hz, 16-bit, stereo
 audio0 at pad0: half duplex, playback, capture
 sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
      SENSE KEY:  Not Ready
       ASC/ASCQ:  Medium Not Present
 
 sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
      SENSE KEY:  Not Ready
       ASC/ASCQ:  Medium Not Present
 
 sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
      SENSE KEY:  Not Ready
       ASC/ASCQ:  Medium Not Present
 
 sd1(umass1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
      SENSE KEY:  Not Ready
       ASC/ASCQ:  Medium Not Present
 
 boot device: sd0
 root on sd0a dumps on sd0b
 root file system type: ffs
 mfi0: normal state on 'mfi0:0' (online)
 raid0: Component /dev/ld2a being configured at col: 0
           Column: 0 Num Columns: 3
           Version: 2 Serial Number: 1223334444 Mod Counter: 350
           Clean: No Status: 0
 /dev/ld2a is not clean!
 raid0: Component /dev/ld3a being configured at col: 1
           Column: 1 Num Columns: 3
           Version: 2 Serial Number: 1223334444 Mod Counter: 350
           Clean: No Status: 0
 /dev/ld3a is not clean!
 raid0: Component /dev/ld4a being configured at col: 2
           Column: 2 Num Columns: 3
           Version: 2 Serial Number: 1223334444 Mod Counter: 350
           Clean: No Status: 0
 /dev/ld4a is not clean!
 raid0: RAID Level 0
 raid0: Components: /dev/ld2a /dev/ld3a /dev/ld4a
 raid0: Total Sectors: 8788377216 (4291199 MB)
 raid0: GPT GUID: 1e0b51e4-bbfa-11de-9484-0015170e985e
 dk0 at raid0: 1e0b51ee-bbfa-11de-9484-0015170e985e
 dk0: 134217728 blocks at 34, type: swap
 dk1 at raid0: 1e0b51ee-bbfa-11de-9485-0015170e985e
 dk1: 8654159421 blocks at 134217762, type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 
 #################################################################
 
 cpuctl list
 
 Num  HwId Unbound LWPs Interrupts     Last change
 ---- ---- ------------ -------------- ----------------------------
 0    0    online       intr           Thu Nov 19 08:07:34 2009
 1    1    online       intr           Thu Nov 19 08:07:34 2009
 2    2    online       intr           Thu Nov 19 08:07:34 2009
 3    3    online       intr           Thu Nov 19 08:07:34 2009
 
 #################################################################
 
 cpuctl identify 0
 
 cpu0: Intel Core 2 (Merom) (686-class), 1995.11 MHz, id 0x6f6
 cpu0: features 0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features 0xbfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
 cpu0: features 0xbfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
 cpu0: features2 
0x4e33d<SSE3,DTES64,MONITOR,DS-CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
 cpu0: features3 0x20100800<SYSCALL/SYSRET,XD,EM64T>
 cpu0: "Intel(R) Xeon(R) CPU            5130  @ 2.00GHz"
 cpu0: I-cache 32KB 64B/line 8-way, D-cache 32KB 64B/line 8-way
 cpu0: L2 cache 4MB 64B/line 16-way
 cpu0: ITLB 128 4KB entries 4-way
 cpu0: DTLB 256 4KB entries 4-way, 16 4MB entries 4-way
 cpu0: Initial APIC ID 0
 cpu0: Cluster/Package ID 0
 cpu0: Core ID 0
 cpu0: family 06 model 0f extfamily 00 extmodel 00