kern/44534: Belkin F5D7050B USB 802.11g adaptor yields "rum0: could not open Tx pipe: IN_USE".

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: kern/44534: Belkin F5D7050B USB 802.11g adaptor yields "rum0: could not open Tx pipe: IN_USE".
From: aball%students.prairiestate.edu@localhost
Date: Tue, 8 Feb 2011 16:40:00 +0000 (UTC)
>Number:         44534
>Category:       kern
>Synopsis:       Belkin F5D7050B USB 802.11g adaptor yields "rum0: could not 
>open Tx pipe: IN_USE".
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Tue Feb 08 16:40:00 +0000 2011
>Originator:     Andrew Ball
>Release:        NetBSD/i386 5.1
>Organization:
>Environment:
NetBSD katmai 5.1 NetBSD 5.1 (GENERIC) #0: Sun Nov  7 14:39:56 UTC 2010  
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/i386/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/i386/compile/GENERIC
 i386
>Description:
In rc.conf, the following enables wpa_supplicant to start and
apparently associate with my new wireless LAN...

wpa_supplicant=YES
wpa_supplicant_flags="-B -irum0 -c/etc/wpa_supplicant.conf"


"ifconfig rum0" yields the following...

rum0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ssid 5tup1d nwkey 65536:"",{deleted},"",""
        powersave off
        bssid 00:26:82:dc:f3:e7 chan 9
        address: 00:1c:df:1d:0e:8d
        media: IEEE802.11 autoselect (OFDM24 mode 11g)
        status: active
        inet6 fe80::21c:dfff:fe1d:e8d%rum0 prefixlen 64 scopeid 0x2
 

Any attempt I have made to assign an IP address, either using
dhclient, dhcpcd or manually assigning one with ifconfig produces
the error "rum0: could not open Tx pipe: IN_USE".

>How-To-Repeat:
-----------------------------< rc.conf >------------------------------
#       $NetBSD: rc.conf,v 1.96 2000/10/14 17:01:29 wiz Exp $
#
# see rc.conf(5) for more information.
#
# Use program=YES to enable program, NO to disable it. program_flags are
# passed to the program on the command line.
#

# Load the defaults in from /etc/defaults/rc.conf (if it's readable).
# These can be overridden below.
#
if [ -r /etc/defaults/rc.conf ]; then
        . /etc/defaults/rc.conf
fi

# If this is not set to YES, the system will drop into single-user mode.
#
rc_configured=YES

# Add local overrides below
#
wscons=YES
hostname=katmai
critical_filesystems_local=/usr
wpa_supplicant=YES
wpa_supplicant_flags="-B -irum0 -c/etc/wpa_supplicant.conf"
#dhcpcd=YES
#dhcpcd_flags="-b -t 0"


-----------------------< wpa_supplicant.conf >------------------------
ctrl_interface=/var/run/wpa_supplicant
eapol_version=2
network={
        ssid="5tup1d"
        scan_ssid=1
        key_mgmt=WPA-PSK
        psk={deleted}
}


--------------------------< ifconfig.rum0 >---------------------------
up


---------------------------< dmesg output >---------------------------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.1 (GENERIC) #0: Sun Nov  7 14:39:56 UTC 2010
        
builds%b6.netbsd.org@localhost:/home/builds/ab/netbsd-5-1-RELEASE/i386/201011061943Z-obj/home/builds/ab/netbsd-5-1-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 510 MB
avail memory = 489 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 4<invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Compaq Deskpro SFF Series    
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 498MHz, id 0x673
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <COMPAQ,CPQB13A ,19991013>, AslId <    ,00000000>
LNKB: ACPI: Found matching pin for 0.31.INTB at func 5: 11
LNKD: ACPI: Found matching pin for 0.31.INTD at func 2: 11
LNKA: ACPI: Found matching pin for 0.1.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 1.2.INTA at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (NCP, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
FHUB (INT0800) at acpi0 not configured
ECP0 (PNP0401) at acpi0 not configured
COM1 (PNP0501) at acpi0 not configured
COM2 (PNP0501) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7124 (rev. 0x03)
pchb0: random number generator enabled
agp0 at pchb0: aperture at 0x44000000, size 0x4000000
vga1 at pci0 dev 1 function 0: vendor 0x8086 product 0x7125 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x2418 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 2 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:50:8b:77:4c:9a
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2410 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801AA IDE Controller (ICH) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2412 (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
auich0 at pci0 dev 31 function 5: i82801AA (ICH) AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Analog Devices AD1881 codec; headphone, Analog Devices Phat Stereo
auich0: ac97: ext id 1<VRA>
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47325 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at uhub0 port 1: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.61, 
addr 2
uhub1: 4 ports with 4 removable, self powered
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: vendor 0x0930 USB Flash Memory, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <, USB Flash Memory, 1.00> disk removable
sd0: fabricating a geometry
sd0: 962 MB, 962 cyl, 64 head, 32 sec, 512 bytes/sect x 1971200 sectors
sd0: fabricating a geometry
wd0 at atabus0 drive 0: <Maxtor 91024U3>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9541 MB, 19386 cyl, 16 head, 63 sec, 512 bytes/sect x 19541088 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <Compaq  CRN-8241B, 1999/05/07, 2.15> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

----------------------------------------------------------------------

>Fix:
None known.
Prev by Date: PR/40455 CVS commit: src/tests/net
Next by Date: Re: kern/44534
Previous by Thread: PR/40455 CVS commit: src/tests/net
Next by Thread: Re: kern/44534
Indexes:
Home | Main Index | Thread Index | Old Index