NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: port-amd64/42895 (Weird ACPI messages every 30 seconds on the console)
The following reply was made to PR port-amd64/42895; it has been noted by GNATS.
From: Rhialto <rhialto%falu.nl@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc: port-amd64-maintainer%NetBSD.org@localhost,
gnats-admin%NetBSD.org@localhost,
netbsd-bugs%NetBSD.org@localhost, rhialto%falu.nl@localhost
Subject: Re: port-amd64/42895 (Weird ACPI messages every 30 seconds on the
console)
Date: Tue, 7 Jun 2011 21:10:03 +0200
On Mon 06 Jun 2011 at 05:50:04 +0000, Jukka Ruohonen wrote:
> Can you try with vanilla sources and normal GENERIC? This because the
> options ENHANCED_SPEEDSTEP no longer does anything. Post the dmesg.
I cvs updated after receiving your email and built new GENERIC and
VARGAZ kernels. dmesg for GENERIC included below.
I tested them for a while yesterday and all was well: no repeated acpi
error messages (just during autoconfig: grep for "ACPI Error:"). No freeze.
But: I just turned the laptop on a few moments ago, and it froze mere
seconds after booting into single user (GENERIC). No X yet, so it was
clear that there were no messages. The next boot worked a bit longer
but froze while sitting idle for several minutes at the xdm login screen.
> > However, twice now the kernel with this option has frozen completely on
> > me, within minutes after boot and login.
>
> Just a freeze? No panic, no traces, nothing?
Nothing :-(
> > I also noticed that estd (for dynamic frequency scaling) didn't like to
> > work any more. It claimed not to recognize the cpu.
>
> No errors were printed or anything?
This may have been pilot error; upon re-testing I managed to boot
"netbsd" (being the 5.1 kernel) even while I was pretty sure I typed
"boot netbsd.bak2". Whatever it was, the error message, when I got it,
was "estd: Cannot guess CPU-scaling technology. (maybe you are missing
some kernel-option?". Hence my adding the option.
GENERIC dmesg, followed by VARGAZ dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.52 (GENERIC) #1: Mon Jun 6 21:08:54 CEST 2011
rhialto%vargaz.falu.nl@localhost:/home/rhialto/tmp/obj.amd64/sys/arch/amd64/compile/GENERIC
total memory = 3998 MB
avail memory = 3860 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard Compaq Presario CQ71 Notebook PC (Rev 1)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, id
0x1067a
cpu1 at mainbus0 apid 1: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, id
0x1067a
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110211
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId < ,01000013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
MCFG (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Hewlett-Packard LION rechargeable battery
acpibat0: model number Primary, serial number
acpibat0: granularity: low->warn 0.010 Ah, warn->full 0.025 Ah
acpivga0 at acpi0 (OVGA): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0320): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0410): ACPI Display Output Device
acpiout2: brightness levels: 0 10 20 30 40 50 60 70 80 90 100
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: connected output devices:
acpivga0: 0x0400: Unknown Output Device, head 0
SYSR (PNP0C02) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
FWHD (INT0800) at acpi0 not configured
pckbc1 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOUE, SYN1E08) (aux port): irq 12
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpidalb0 at acpi0 (QBTN, PNP0C32-1): Direct Application Launch Button
acpidalb1 at acpi0 (DBTN, PNP0C32-2): Direct Application Launch Button
acpidalb2 at acpi0 (MBTN, PNP0C32-3): Direct Application Launch Button
acpidalb3 at acpi0 (EBTN, PNP0C32-4): Direct Application Launch Button
acpidalb4 at acpi0 (PBTN, PNP0C32-6): Direct Application Launch Button
acpidalb5 at acpi0 (VBTN, PNP0C32-7): Direct Application Launch Button
acpidalb6 at acpi0 (TBTN, PNP0C32-8): Direct Application Launch Button
acpitz0 at acpi0 (TZ01): cpu0 cpu1
ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
(20110211/psargs-392)
ACPI Error: Method parse/execution failed [\CPUL] (Node 0xffff800007b2dec0),
AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01.OTHD] (Node
0xffff800007b2c380), AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node
0xffff800007b2c540), AE_NOT_FOUND (20110211/psparse-560)
acpitz0: levels: hot 110.0 C, passive 135.0 C, passive cooling
ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
(20110211/psargs-392)
ACPI Error: Method parse/execution failed [\CPUL] (Node 0xffff800007b2dec0),
AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01.OTHD] (Node
0xffff800007b2c380), AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node
0xffff800007b2c540), AE_NOT_FOUND (20110211/psparse-560)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2a40 (rev. 0x07)
agp0 at pchb0: detected 65532k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a42 (rev. 0x07)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga0: Mobile IntelM-BM-. GM45 Express Chipset
i915drm0: AGP at 0xc0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x2a43 (miscellaneous display, revision 0x07) at pci0
dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Sigmatel 92HD75B2X5
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0: Intel G45 HDMI
hdafg1: HDMI00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz 16/16*
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x03)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci1 dev 0 function 0: Atheros 9285
ath0: interrupting at ioapic0 pin 16
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ath0: mac 192.2 phy 14.0 radio 12.0
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2942 (rev. 0x03)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:26:9e:ce:8c:54
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 20
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 16
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 3: vendor 0x8086 product 0x2939 (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x93)
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2919 (rev. 0x03)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2929
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.2, 4 ports, 32 command slots, features 0xef22e0e0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x2930 (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
vendor 0x8086 product 0x2932 (miscellaneous DASP, revision 0x03) at pci0 dev
31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 17 us, pow 250 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2100 MHz
acpicpu0: P1: FFH, lat 10 us, pow 23888 mW, 1600 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15000 mW, 1200 MHz
acpicpu0: T0: HLT, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: HLT, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: HLT, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: HLT, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: HLT, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: HLT, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: HLT, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: HLT, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD5000BEVT-60ZAT1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp DVDRAM GT30L, KZQ9C343835, mP04> cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
uvideo0 at uhub7 port 4 configuration 1 interface 0: SuYin HP Webcam-101, rev
2.00/1.22, addr 2
video0 at uvideo0: SuYin HP Webcam-101, rev 2.00/1.22, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: vendor 0x13ba Generic USB K/B, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: vendor 0x13ba Generic USB K/B, rev 1.10/0.01, addr 2, iclass 3/1
uhidev1: 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
-----
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.52 (VARGAZSMALL) #3: Mon Jun 6 21:24:41 CEST 2011
rhialto%vargaz.falu.nl@localhost:/home/rhialto/tmp/obj.amd64/sys/arch/amd64/compile/VARGAZSMALL
total memory = 3998 MB
avail memory = 3866 MB
timecounter: Timecounters tick every 10.000 msec
RTC BIOS diagnostic error 0x80<clock_battery>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard Compaq Presario CQ71 Notebook PC (Rev 1)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, id
0x1067a
cpu1 at mainbus0 apid 1: Pentium(R) Dual-Core CPU T4300 @ 2.10GHz, id
0x1067a
ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110211
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId < ,01000013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
MCFG (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Hewlett-Packard LION rechargeable battery
acpibat0: model number Primary, serial number
acpibat0: granularity: low->warn 0.010 Ah, warn->full 0.025 Ah
acpivga0 at acpi0 (OVGA): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0320): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0410): ACPI Display Output Device
acpiout2: brightness levels: 0 10 20 30 40 50 60 70 80 90 100
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: connected output devices:
acpivga0: 0x0400: Unknown Output Device, head 0
SYSR (PNP0C02) [Motherboard Register Resources] at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff irq 0,8
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
attimer0 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53
FWHD (INT0800) [Intel Firmware Hub Device] at acpi0 not configured
pckbc0 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc1 at acpi0 (MOUE, SYN1E08) (aux port): irq 12
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpidalb0 at acpi0 (QBTN, PNP0C32-1): Direct Application Launch Button
acpidalb1 at acpi0 (DBTN, PNP0C32-2): Direct Application Launch Button
acpidalb2 at acpi0 (MBTN, PNP0C32-3): Direct Application Launch Button
acpidalb3 at acpi0 (EBTN, PNP0C32-4): Direct Application Launch Button
acpidalb4 at acpi0 (PBTN, PNP0C32-6): Direct Application Launch Button
acpidalb5 at acpi0 (VBTN, PNP0C32-7): Direct Application Launch Button
acpidalb6 at acpi0 (TBTN, PNP0C32-8): Direct Application Launch Button
acpitz0 at acpi0 (TZ01): cpu0 cpu1
ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
(20110211/psargs-392)
ACPI Error: Method parse/execution failed [\CPUL] (Node 0xffff800007b57bc0),
AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01.OTHD] (Node
0xffff800007b56080), AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node
0xffff800007b56240), AE_NOT_FOUND (20110211/psparse-560)
acpitz0: levels: hot 110.0 C, passive 135.0 C, passive cooling
ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
(20110211/psargs-392)
ACPI Error: Method parse/execution failed [\CPUL] (Node 0xffff800007b57bc0),
AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01.OTHD] (Node
0xffff800007b56080), AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node
0xffff800007b56240), AE_NOT_FOUND (20110211/psparse-560)
acpi0: [MADT] LAPIC : CPU ID 1, LAPIC ID 0, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 2, LAPIC ID 1, FLAGS 0x01
acpi0: [MADT] LAPIC : CPU ID 3, LAPIC ID 0, FLAGS 0x00
acpi0: [MADT] LAPIC : CPU ID 4, LAPIC ID 0, FLAGS 0x00
acpi0: [MADT] I/O APIC : ID 4, GSI 0, ADDR 0xFEC00000
acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 0, GSI 2, FLAGS 0x00
acpi0: [MADT] INTR OVERRIDE : BUS 0, IRQ 9, GSI 9, FLAGS 0x0D
acpi0: [FADT] FACS : 0x00000000B9F8F000
acpi0: [FADT] DSDT : 0x00000000B9FE5000
acpi0: [FADT] INT_MODEL : 0x0000000000000000
acpi0: [FADT] PM_PROFILE : 0x0000000000000002
acpi0: [FADT] SCI_INT : 0x0000000000000009
acpi0: [FADT] SMI_CMD : 0x00000000000000B2
acpi0: [FADT] ACPI_ENABLE : 0x00000000000000A0
acpi0: [FADT] ACPI_DISABLE : 0x00000000000000A1
acpi0: [FADT] S4BIOS_REQ : 0x0000000000000000
acpi0: [FADT] PSTATE_CNT : 0x0000000000000000
acpi0: [FADT] PM1a_EVT_BLK : 0x0000000000000400
acpi0: [FADT] PM1b_EVT_BLK : 0x0000000000000000
acpi0: [FADT] PM1a_CNT_BLK : 0x0000000000000404
acpi0: [FADT] PM1b_CNT_BLK : 0x0000000000000000
acpi0: [FADT] PM2_CNT_BLK : 0x0000000000000450
acpi0: [FADT] PM_TMR_BLK : 0x0000000000000408
acpi0: [FADT] GPE0_BLK : 0x0000000000000420
acpi0: [FADT] GPE1_BLK : 0x0000000000000000
acpi0: [FADT] PM1_EVT_LEN : 0x0000000000000004
acpi0: [FADT] PM1_CNT_LEN : 0x0000000000000002
acpi0: [FADT] PM2_CNT_LEN : 0x0000000000000001
acpi0: [FADT] PM_TMR_LEN : 0x0000000000000004
acpi0: [FADT] GPE0_BLK_LEN : 0x0000000000000010
acpi0: [FADT] GPE1_BLK_LEN : 0x0000000000000000
acpi0: [FADT] GPE1_BASE : 0x0000000000000000
acpi0: [FADT] CST_CNT : 0x0000000000000000
acpi0: [FADT] P_LVL2_LAT : 0x0000000000000065
acpi0: [FADT] P_LVL3_LAT : 0x00000000000003E9
acpi0: [FADT] FLUSH_SIZE : 0x0000000000000000
acpi0: [FADT] FLUSH_STRIDE : 0x0000000000000000
acpi0: [FADT] DUTY_OFFSET : 0x0000000000000001
acpi0: [FADT] DUTY_WIDTH : 0x0000000000000003
acpi0: [FADT] DAY_ALRM : 0x000000000000000D
acpi0: [FADT] MON_ALRM : 0x0000000000000000
acpi0: [FADT] CENTURY : 0x0000000000000000
acpi0: [FADT] IAPC_BOOT_ARCH : 0x0000000000000003
acpi0: [FADT] RESET_VALUE : 0x0000000000000049
acpi0: [FADT] WBINVD : 0x0000000000000001
acpi0: [FADT] WBINVD_FLUSH : 0x0000000000000000
acpi0: [FADT] PROC_C1 : 0x0000000000000004
acpi0: [FADT] P_LVL2_UP : 0x0000000000000000
acpi0: [FADT] PWR_BUTTON : 0x0000000000000000
acpi0: [FADT] SLP_BUTTON : 0x0000000000000020
acpi0: [FADT] FIX_RTC : 0x0000000000000000
acpi0: [FADT] RTC_S4 : 0x0000000000000080
acpi0: [FADT] TMR_VAL_EXT : 0x0000000000000000
acpi0: [FADT] DCK_CAP : 0x0000000000000000
acpi0: [FADT] RESET_REG_SUP : 0x0000000000000400
acpi0: [FADT] SEALED_CASE : 0x0000000000000000
acpi0: [FADT] HEADLESS : 0x0000000000000000
acpi0: [FADT] CPU_SW_SLP : 0x0000000000000000
acpi0: [FADT] PCI_EXP_WAK : 0x0000000000000000
acpi0: [FADT] PLATFORM_CLK : 0x0000000000008000
acpi0: [FADT] S4_RTC_STS : 0x0000000000000000
acpi0: [FADT] REMOTE_POWER : 0x0000000000000000
acpi0: [FADT] APIC_CLUSTER : 0x0000000000000000
acpi0: [FADT] APIC_PHYSICAL : 0x0000000000000000
acpi0: [\ ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU0] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU1] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU2] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [CPU3] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [_SB ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [MCFG] HID PNP0C02 UID - STA 0xFFFFFFFF ADR -
acpi0: [PWRB] HID PNP0C0C UID - STA 0xFFFFFFFF ADR -
acpi0: [LID0] HID PNP0C0D UID - STA 0xFFFFFFFF ADR -
acpi0: [SLPB] HID PNP0C0E UID - STA 0xFFFFFFFF ADR -
acpi0: [ACAD] HID ACPI0003 UID - STA 0x0000000F ADR -
acpi0: [BAT0] HID PNP0C0A UID 1 STA 0x0000000F ADR -
acpi0: [PCI0] HID PNP0A08 UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [OVGA] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000020000
acpi0: [DD01] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000100
acpi0: [DD02] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000320
acpi0: [DD03] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000410
acpi0: [DD04] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000004
acpi0: [DD05] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000005
acpi0: [PEGP] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000010000
acpi0: [VGA ] HID - UID - STA 0x0000000F ADR 0x0000000000000000
acpi0: [CRT ] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000100
acpi0: [LCD ] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000118
acpi0: [HDMI] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000121
acpi0: [LANC] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000190000
acpi0: [P32 ] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001E0000
acpi0: [LPC ] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001F0000
acpi0: [LNKA] HID PNP0C0F UID 1 STA 0x0000000B ADR -
acpi0: [LNKB] HID PNP0C0F UID 2 STA 0x0000000B ADR -
acpi0: [LNKC] HID PNP0C0F UID 3 STA 0x0000000B ADR -
acpi0: [LNKD] HID PNP0C0F UID 4 STA 0x0000000B ADR -
acpi0: [LNKE] HID PNP0C0F UID 5 STA 0x0000000B ADR -
acpi0: [LNKF] HID PNP0C0F UID 6 STA 0x0000000B ADR -
acpi0: [LNKG] HID PNP0C0F UID 7 STA 0x0000000B ADR -
acpi0: [LNKH] HID PNP0C0F UID 8 STA 0x00000009 ADR -
acpi0: [SYSR] HID PNP0C02 UID - STA 0xFFFFFFFF ADR -
acpi0: [DMAC] HID PNP0200 UID - STA 0xFFFFFFFF ADR -
acpi0: [RTC ] HID PNP0B00 UID - STA 0xFFFFFFFF ADR -
acpi0: [HPET] HID PNP0103 UID - STA 0x0000000F ADR -
acpi0: [PIC ] HID PNP0000 UID - STA 0xFFFFFFFF ADR -
acpi0: [FPU ] HID PNP0C04 UID - STA 0xFFFFFFFF ADR -
acpi0: [TIMR] HID PNP0100 UID - STA 0xFFFFFFFF ADR -
acpi0: [FWHD] HID INT0800 UID - STA 0xFFFFFFFF ADR -
acpi0: [KBC ] HID PNP0303 UID - STA 0x0000000F ADR -
acpi0: [MOUE] HID SYN1E08 UID - STA 0x0000000F ADR -
acpi0: [EC0 ] HID PNP0C09 UID 1 STA 0xFFFFFFFF ADR -
acpi0: [TPM ] HID PNP0C31 UID - STA 0x00000000 ADR -
acpi0: [UHC0] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0000
acpi0: [UHC1] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0001
acpi0: [UHC2] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0002
acpi0: [RHUB] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [PRT2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000002
acpi0: [EHC1] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001D0007
acpi0: [RHUB] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [PRT1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [PRT2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000002
acpi0: [PRT3] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000003
acpi0: [PRT4] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000004
acpi0: [PRT5] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000005
acpi0: [PRT6] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000006
acpi0: [PRT7] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000007
acpi0: [PRT8] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000008
acpi0: [UHC3] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001A0000
acpi0: [UHC4] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001A0001
acpi0: [UHC5] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001A0002
acpi0: [EHC2] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001A0007
acpi0: [RHUB] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [PRT1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [PRT2] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000002
acpi0: [PRT3] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000003
acpi0: [PRT4] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000004
acpi0: [EXP1] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0000
acpi0: [EXP2] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0001
acpi0: [PXSX] HID - UID - STA 0x0000000F ADR 0x0000000000000000
acpi0: [EXP3] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0002
acpi0: [EXP4] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0003
acpi0: [EXP5] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0004
acpi0: [J380] HID - UID - STA 0x0000000F ADR 0x0000000000000000
acpi0: [J381] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [J382] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000002
acpi0: [J383] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000003
acpi0: [J384] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000004
acpi0: [EXP6] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001C0005
acpi0: [PXSX] HID - UID - STA 0x0000000F ADR 0x0000000000000000
acpi0: [SAT0] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001F0002
acpi0: [PRID] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [SECD] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [S_D0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [S_D1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [SAT1] HID - UID - STA 0xFFFFFFFF ADR 0x00000000001F0005
acpi0: [PRID] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [P_D1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [SECD] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [S_D0] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000000
acpi0: [S_D1] HID - UID - STA 0xFFFFFFFF ADR 0x0000000000000001
acpi0: [WMID] HID PNP0C14 UID 0 STA 0xFFFFFFFF ADR -
acpi0: [QBTN] HID PNP0C32 UID 1 STA 0x0000000F ADR -
acpi0: [DBTN] HID PNP0C32 UID 2 STA 0x0000000F ADR -
acpi0: [MBTN] HID PNP0C32 UID 3 STA 0x0000000F ADR -
acpi0: [EBTN] HID PNP0C32 UID 4 STA 0x0000000F ADR -
acpi0: [PBTN] HID PNP0C32 UID 6 STA 0x0000000F ADR -
acpi0: [VBTN] HID PNP0C32 UID 7 STA 0x0000000F ADR -
acpi0: [TBTN] HID PNP0C32 UID 8 STA 0x0000000F ADR -
acpi0: [_TZ ] HID - UID - STA 0xFFFFFFFF ADR -
acpi0: [TZ01] HID - UID - STA - ADR -
\ [06] []
CPU0 [12] []
CPU1 [12] []
CPU2 [12] []
CPU3 [12] []
_SB [06] []
MCFG [06] []
PWRB [06] [] <acpibut0>
LID0 [06] [] <acpilid0>
SLPB [06] [] <acpibut1>
ACAD [06] [] <acpiacad0>
BAT0 [06] [] <acpibat0>
PCI0 [06] [] (PCI) @ 0x00:0x00:0x00:0x00 [R] [B] -> 0x00:0x00
OVGA [06] [] <acpivga0> (PCI) @ 0x00:0x00:0x02:0x00
DD01 [06] [] <acpiout0>
DD02 [06] [] <acpiout1>
DD03 [06] [] <acpiout2>
DD04 [06] [] <acpiout3>
DD05 [06] [] <acpiout4>
PEGP [06] [] (PCI) @ 0x00:0x00:0x01:0x00
VGA [06] []
CRT [06] []
LCD [06] []
HDMI [06] []
LANC [06] [] (PCI) @ 0x00:0x00:0x19:0x00
P32 [06] [] (PCI) @ 0x00:0x00:0x1E:0x00 [B] -> 0x00:0x04
LPC [06] [] (PCI) @ 0x00:0x00:0x1F:0x00
LNKA [06] []
LNKB [06] []
LNKC [06] []
LNKD [06] []
LNKE [06] []
LNKF [06] []
LNKG [06] []
LNKH [06] []
SYSR [06] []
DMAC [06] []
RTC [06] []
HPET [06] [] <hpet0>
PIC [06] []
FPU [06] []
TIMR [06] [] <attimer0>
FWHD [06] []
KBC [06] [] <pckbc0>
MOUE [06] [] <pckbc1>
EC0 [06] [] <acpiec0>
TPM [06] []
UHC0 [06] [] (PCI) @ 0x00:0x00:0x1D:0x00
UHC1 [06] [] (PCI) @ 0x00:0x00:0x1D:0x01
UHC2 [06] [] (PCI) @ 0x00:0x00:0x1D:0x02
RHUB [06] []
PRT2 [06] []
EHC1 [06] [] (PCI) @ 0x00:0x00:0x1D:0x07
RHUB [06] []
PRT1 [06] []
PRT2 [06] []
PRT3 [06] []
PRT4 [06] []
PRT5 [06] []
PRT6 [06] []
PRT7 [06] []
PRT8 [06] []
UHC3 [06] [] (PCI) @ 0x00:0x00:0x1A:0x00
UHC4 [06] [] (PCI) @ 0x00:0x00:0x1A:0x01
UHC5 [06] [] (PCI) @ 0x00:0x00:0x1A:0x02
EHC2 [06] [] (PCI) @ 0x00:0x00:0x1A:0x07
RHUB [06] []
PRT1 [06] []
PRT2 [06] []
PRT3 [06] []
PRT4 [06] []
EXP1 [06] [] (PCI) @ 0x00:0x00:0x1C:0x00 [B] -> 0x00:0x02
EXP2 [06] [] (PCI) @ 0x00:0x00:0x1C:0x01 [B] -> 0x00:0x03
PXSX [06] [] (PCI) @ 0x00:0x03:0x00:0x00
EXP3 [06] [] (PCI) @ 0x00:0x00:0x1C:0x02
EXP4 [06] [] (PCI) @ 0x00:0x00:0x1C:0x03
EXP5 [06] [] (PCI) @ 0x00:0x00:0x1C:0x04
J380 [06] []
J381 [06] []
J382 [06] []
J383 [06] []
J384 [06] []
EXP6 [06] [] (PCI) @ 0x00:0x00:0x1C:0x05
PXSX [06] []
SAT0 [06] [] (PCI) @ 0x00:0x00:0x1F:0x02
PRID [06] []
P_D0 [06] []
P_D1 [06] []
SECD [06] []
S_D0 [06] []
S_D1 [06] []
SAT1 [06] [] (PCI) @ 0x00:0x00:0x1F:0x05
PRID [06] []
P_D0 [06] []
P_D1 [06] []
SECD [06] []
S_D0 [06] []
S_D1 [06] []
WMID [06] [] <acpiwmi0>
QBTN [06] [] <acpidalb0>
DBTN [06] [] <acpidalb1>
MBTN [06] [] <acpidalb2>
EBTN [06] [] <acpidalb3>
PBTN [06] [] <acpidalb4>
VBTN [06] [] <acpidalb5>
TBTN [06] [] <acpidalb6>
_TZ [06] []
TZ01 [13] [] <acpitz0>
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82GM45 Host Bridge (rev. 0x07)
agp0 at pchb0: detected 65532k stolen memory
agp0: aperture at 0xc0000000, size 0x10000000
vga0 at pci0 dev 2 function 0: Intel 82GM45 Integrated Graphics Device (rev.
0x07)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga0: Mobile IntelM-BM-. GM45 Express Chipset
i915drm0: AGP at 0xc0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
Intel 82GM45 Integrated Graphics Device (miscellaneous display, revision 0x07)
at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev. 0x03)
ehci0: interrupting at ioapic0 pin 19
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Sigmatel 92HD75B2X5
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz 16/16 20/32 24/32
audio0 at hdafg0: full duplex, playback, capture, independent
hdafg1 at hdaudio0: Intel G45 HDMI
hdafg1: HDMI00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz 16/16*
ppb0 at pci0 dev 28 function 0: Intel 82801I PCI Express Port #1 (rev. 0x03)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci1 dev 0 function 0: Atheros 9285
ath0: interrupting at ioapic0 pin 16
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ath0: mac 192.2 phy 14.0 radio 12.0
ppb1 at pci0 dev 28 function 1: Intel 82801I PCI Express Port #2 (rev. 0x03)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe
10/100BaseTX (rev. 0x02)
re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:26:9e:ce:8c:54
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci2 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci2: interrupting at ioapic0 pin 20
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci4: interrupting at ioapic0 pin 16
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 3: Intel 82801I USB UHCI Controller (rev. 0x03)
uhci5: interrupting at ioapic0 pin 18
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x03)
ehci1: interrupting at ioapic0 pin 20
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4 uhci5
usb7 at ehci1: USB revision 2.0
ppb2 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x93)
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: Intel 82801IM LPC Interface Bridge (rev. 0x03)
ahcisata0 at pci0 dev 31 function 2: Intel 82801I Mobile AHCI SATA Controller
with 4 ports
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.2, 4 ports, 32 command slots, features 0xef22e0e0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: Intel 82801I SMBus Controller (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
Intel 82801I Thermal Controller (miscellaneous DASP, revision 0x03) at pci0
dev 31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
attimer0: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 17 us, pow 250 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2100 MHz
acpicpu0: P1: FFH, lat 10 us, pow 23888 mW, 1600 MHz
acpicpu0: P2: FFH, lat 10 us, pow 15000 mW, 1200 MHz
acpicpu0: T0: HLT, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: HLT, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: HLT, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: HLT, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: HLT, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: HLT, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: HLT, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: HLT, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
uhub0 at usb0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub7: 8 ports with 8 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD5000BEVT-60ZAT1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp DVDRAM GT30L, KZQ9C343835, mP04> cdrom
removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
uvideo0 at uhub7 port 4 configuration 1 interface 0: SuYin HP Webcam-101, rev
2.00/1.22, addr 2
video0 at uvideo0: SuYin HP Webcam-101, rev 2.00/1.22, addr 2
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: vendor 0x13ba Generic USB K/B, rev 1.10/0.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: vendor 0x13ba Generic USB K/B, rev 1.10/0.01, addr 2, iclass 3/1
uhidev1: 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
-Olaf.
--
___ Olaf 'Rhialto' Seibert -- There's no point being grown-up if you
\X/ rhialto/at/xs4all.nl -- can't be childish sometimes. -The 4th Doctor
Home |
Main Index |
Thread Index |
Old Index