NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
kern/45062: NetBSD-current amd64 kernel fails to boot on Xen3.3
>Number: 45062
>Category: kern
>Synopsis: NetBSD-current amd64 kernel fails to boot on Xen3.3
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: kern-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Tue Jun 14 17:20:00 +0000 2011
>Originator: Roger Pau Monné
>Release: 5.99.53
>Organization:
UPC
>Environment:
NetBSD odin 5.99.53 NetBSD 5.99.53 (GENERIC) #0: Tue Jun 14 13:36:52 CEST 2011
royger@:/usr/obj/sys/arch/amd64/compile/GENERIC amd64
>Description:
I'm trying to run Xen3.3 on a current kernel (I need the current
kernel version, because it's the only way to get my network card
drivers), but the kernel enters some kind of loop during boot, and
there's a page fault during the boot process also. Here is the output
of the boot:
997040+498000=0x16d0c0
WARNING: couldn't open ffs (//ffs/ffs.kmod)
Loading /netbsd.xen /
__ __ _____ _____ ____
\ \/ /___ _ __ |___ / |___ / |___ \
\ // _ \ '_ \ |_ \ |_ \ __) |
/ \ __/ | | | ___) | ___) | / __/
/_/\_\___|_| |_| |____(_)____(_)_____|
(XEN) Xen version 3.3.2 (root@) (gcc version 4.1.3 20080704 prerelease (NetBSD
nb2 20081120)) Tue Jun 14 12:13:08 CEST 2011
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: dom0_mem=512M console=com1 com1=115200,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 00000000cf379000 (usable)
(XEN) 00000000cf379000 - 00000000cf38f000 (reserved)
(XEN) 00000000cf38f000 - 00000000cf3ce000 (ACPI data)
(XEN) 00000000cf3ce000 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fe000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000c30000000 (usable)
(XEN) System RAM: 49139MB (50318436kB)
(XEN) ACPI: RSDP 000F1870, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000F1974, 009C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: FACP CF3B3F9C, 00F4 (r3 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DSDT CF38F000, 39D9 (r1 DELL PE_SC3 1 INTL 20050624)
(XEN) ACPI: FACS CF3B6000, 0040
(XEN) ACPI: APIC CF3B3478, 015E (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SPCR CF3B35D8, 0050 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HPET CF3B362C, 0038 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DMAR CF3B3668, 01C0 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: MCFG CF3B38C4, 003C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: WD__ CF3B3904, 0134 (r1 DELL PE_SC3 L 1)
(XEN) ACPI: SLIC CF3B3A3C, 0024 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: ERST CF392B5C, 0270 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HEST CF392DCC, 03A8 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: BERT CF3929DC, 0030 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: EINJ CF392A0C, 0150 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SRAT CF3B3BC0, 0370 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: TCPA CF3B3F34, 0064 (r2 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SSDT CF3B7000, 65DC (r1 INTEL PPM RCM 80000001 INTL 20061109)
(XEN) Xen heap: 14MB (14384kB)
(XEN) Domain heap initialised
(XEN) Processor #32 6:12 APIC version 21
(XEN) Processor #0 6:12 APIC version 21
(XEN) Processor #34 6:12 APIC version 21
(XEN) Processor #2 6:12 APIC version 21
(XEN) Processor #36 6:12 APIC version 21
(XEN) Processor #4 6:12 APIC version 21
(XEN) Processor #48 6:12 APIC version 21
(XEN) Processor #16 6:12 APIC version 21
(XEN) Processor #50 6:12 APIC version 21
(XEN) Processor #18 6:12 APIC version 21
(XEN) Processor #52 6:12 APIC version 21
(XEN) Processor #20 6:12 APIC version 21
(XEN) Processor #33 6:12 APIC version 21
(XEN) Processor #1 6:12 APIC version 21
(XEN) Processor #35 6:12 APIC version 21
(XEN) Processor #3 6:12 APIC version 21
(XEN) Processor #37 6:12 APIC version 21
(XEN) Processor #5 6:12 APIC version 21
(XEN) Processor #49 6:12 APIC version 21
(XEN) Processor #17 6:12 APIC version 21
(XEN) Processor #51 6:12 APIC version 21
(XEN) Processor #19 6:12 APIC version 21
(XEN) Processor #53 6:12 APIC version 21
(XEN) Processor #21 6:12 APIC version 21
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2394.051 MHz processor.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) VMX: EPT is available.
(XEN) VMX: VPID is available.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) CPU0: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 1/0 eip 8c000
(XEN) CPU1: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 2/34 eip 8c000
(XEN) CPU2: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 3/2 eip 8c000
(XEN) CPU3: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 4/36 eip 8c000
(XEN) CPU4: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 5/4 eip 8c000
(XEN) CPU5: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 6/48 eip 8c000
(XEN) CPU6: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 7/16 eip 8c000
(XEN) CPU7: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 8/50 eip 8c000
(XEN) CPU8: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 9/18 eip 8c000
(XEN) CPU9: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 10/52 eip 8c000
(XEN) CPU10: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 11/20 eip 8c000
(XEN) CPU11: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 12/33 eip 8c000
(XEN) CPU12: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 13/1 eip 8c000
(XEN) CPU13: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 14/35 eip 8c000
(XEN) CPU14: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 15/3 eip 8c000
(XEN) CPU15: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 16/37 eip 8c000
(XEN) CPU16: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 17/5 eip 8c000
(XEN) CPU17: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 18/49 eip 8c000
(XEN) CPU18: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 19/17 eip 8c000
(XEN) CPU19: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 20/51 eip 8c000
(XEN) CPU20: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 21/19 eip 8c000
(XEN) CPU21: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 22/53 eip 8c000
(XEN) CPU22: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Booting processor 23/21 eip 8c000
(XEN) CPU23: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
(XEN) Total of 24 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 24 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 24 CPUs
(XEN) I/O virtualisation disabled
(XEN) xenoprof: Initialization failed. Intel processor model 44 for P6 class
family is not supported
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80000000 -> 0xffffffff80d0ef00
(XEN) Dom0 symbol map 0xffffffff80d0ef00 -> 0xffffffff80e20628
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000c07000000->0000000c08000000 (126976 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80000000->ffffffff80e20628
(XEN) Init. ramdisk: ffffffff80e21000->ffffffff80e21000
(XEN) Phys-Mach map: ffffffff80e21000->ffffffff80f21000
(XEN) Start info: ffffffff80f21000->ffffffff80f214a4
(XEN) Page tables: ffffffff80f22000->ffffffff80f2d000
(XEN) Boot stack: ffffffff80f2d000->ffffffff80f2e000
(XEN) TOTAL: ffffffff80000000->ffffffff81000000
(XEN) ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 24 VCPUs
(XEN) Scrubbing Free RAM:
................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 104kB init memory.
Loaded initial symtab at 0xffffffff80d0ef04, strtab at 0xffffffff80db3770, #
entries 27964
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.53 (XEN3_DOM0) #0: Tue Jun 14 13:35:07 CEST 2011
royger@:/usr/obj/sys/arch/amd64/compile/XEN3_DOM0
total memory = 512 MB
avail memory = 480 MB
mainbus0 (root)
pmap_kenter_pa: pa 0x0 for va 0xffffa00023554000 outside range
pmap_kenter_pa: pa 0x9e000 for va 0xffffa00023554000 outside range
pmap_kenter_pa: pa 0x9e000 for va 0xffffa00023554000 outside range
pmap_kenter_pa: pa 0xf0000 for va 0xffffa00023554000 outside range
pmap_kenter_pa: pa 0xf1000 for va 0xffffa00023555000 outside range
pmap_kenter_pa: pa 0xf2000 for va 0xffffa00023556000 outside range
pmap_kenter_pa: pa 0xf3000 for va 0xffffa00023557000 outside range
pmap_kenter_pa: pa 0xf4000 for va 0xffffa00023558000 outside range
pmap_kenter_pa: pa 0xf5000 for va 0xffffa00023559000 outside range
pmap_kenter_pa: pa 0xf6000 for va 0xffffa0002355a000 outside range
pmap_kenter_pa: pa 0xf7000 for va 0xffffa0002355b000 outside range
pmap_kenter_pa: pa 0xf8000 for va 0xffffa0002355c000 outside range
pmap_kenter_pa: pa 0xf9000 for va 0xffffa0002355d000 outside range
pmap_kenter_pa: pa 0xfa000 for va 0xffffa0002355e000 outside range
pmap_kenter_pa: pa 0xfb000 for va 0xffffa0002355f000 outside range
pmap_kenter_pa: pa 0xfc000 for va 0xffffa00023560000 outside range
pmap_kenter_pa: pa 0xfd000 for va 0xffffa00023561000 outside range
pmap_kenter_pa: pa 0xfe000 for va 0xffffa00023562000 outside range
pmap_kenter_pa: pa 0xff000 for va 0xffffa00023563000 outside range
pmap_kenter_pa: pa 0xfe000 for va 0xffffa00023554000 outside range
mainbus0: MP fps invalid: no default config and no configuration table
uvm_fault(0xffffffff80c814a0, 0xffffa00023557000, 2) -> e
fatal page fault in supervisor mode
trap type 6 code 3 rip ffffffff8071d88f cs e030 rflags 10246 cr2
ffffa00023557d80 cpl 8 rsp ffffffff80f33b48
kernel: page fault trap, code=0
Stopped in pid 0.1 (system) at netbsd:memcpy+0x1f: repe movsq (%rsi),%
es:(%rdi)
memcpy() at netbsd:memcpy+0x1f
uvm_lwp_fork() at netbsd:uvm_lwp_fork+0x11
lwp_create() at netbsd:lwp_create+0x257
kthread_create() at netbsd:kthread_create+0xd6
sysmon_task_queue_init() at netbsd:sysmon_task_queue_init+0x6d
acpi_osd_sched_init() at netbsd:acpi_osd_sched_init+0x9
AcpiOsInitialize() at netbsd:AcpiOsInitialize+0x9
AcpiInitializeSubsystem() at netbsd:AcpiInitializeSubsystem+0x18
acpi_probe() at netbsd:acpi_probe+0x3d
mainbus_attach() at netbsd:mainbus_attach+0xc1
config_attach_loc() at netbsd:config_attach_loc+0x16c
cpu_configure() at netbsd:cpu_configure+0x25
main() at netbsd:main+0x225
ds 50
es fae0
fs 3b10
gs 0
rdi ffffa00023557d80
rsi ffffffff80f30000
rbp ffffffff80f33ba0
rbx ffffa0002313b8c0
rdx 280
rcx 50
rax ffffa00023557d80
r8 ffffffff805f912b sysmon_task_queue_thread
r9 ffffa00023557ff8
r10 0
r11 0
r12 ffffa0002313b8c0
r13 ffffffff80c3f0e0 proc0
r14 ffffffff80c3e420 lwp0
r15 40
rip ffffffff8071d88f memcpy+0x1f
cs e030
rflags 10246
rsp ffffffff80f33b48
ss e02b
netbsd:memcpy+0x1f: repe movsq (%rsi),%es:(%rdi)
db> bt
memcpy() at netbsd:memcpy+0x1f
uvm_lwp_fork() at netbsd:uvm_lwp_fork+0x11
lwp_create() at netbsd:lwp_create+0x257
kthread_create() at netbsd:kthread_create+0xd6
sysmon_task_queue_init() at netbsd:sysmon_task_queue_init+0x6d
acpi_osd_sched_init() at netbsd:acpi_osd_sched_init+0x9
AcpiOsInitialize() at netbsd:AcpiOsInitialize+0x9
AcpiInitializeSubsystem() at netbsd:AcpiInitializeSubsystem+0x18
acpi_probe() at netbsd:acpi_probe+0x3d
mainbus_attach() at netbsd:mainbus_attach+0xc1
config_attach_loc() at netbsd:config_attach_loc+0x16c
cpu_configure() at netbsd:cpu_configure+0x25
main() at netbsd:main+0x225
db> c
ACPI Exception: AE_NO_ACPI_TABLES, While loading namespace from ACPI tables
(20110211/tbxface-596)
acpi_probe: failed to load tables
cpu0 at mainbus0
ipmi0 at mainbus0
hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz, id
0x206c2
(XEN) traps.c:2180:d0 Domain attempted WRMSR 0000000000000277 from
00000501:00070406 to 00070106:00070106.
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
pci0 at hypervisor0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3403 (rev. 0x13)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-SX
bnx0: Ethernet address 18:03:73:0a:88:d9
bnx0: interrupting at irq 15, event channel 3
brgphy0 at bnx0 phy 2: BCM5709S 1000/2500baseSX PHY, rev. 0
brgphy0: 1000baseSX-FDX, auto
bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-SX
bnx1: Ethernet address 18:03:73:0a:88:db
bnx1: interrupting at irq 14, event channel 4
brgphy1 at bnx1 phy 2: BCM5709S 1000/2500baseSX PHY, rev. 0
brgphy1: 1000baseSX-FDX, auto
ppb1 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 3
ppb2 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 4
vendor 0x8086 product 0x342e (interrupt system, revision 0x13) at pci0 dev 20
function 0 not configured
vendor 0x8086 product 0x3422 (interrupt system, revision 0x13) at pci0 dev 20
function 1 not configured
vendor 0x8086 product 0x3423 (interrupt system, revision 0x13) at pci0 dev 20
function 2 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at irq 14, event channel 4
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at irq 11, event channel 5
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 functn controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
ppb3 at pci0 dev 28 function 0: vendor 0x8086 product 0x2940 (rev. 0x02)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 2
mpt has not been converted to device_t
mpt0 at pci4 dev 0 function 0: vendor 0x1000 product 0x0058
mpt0: interrupting at irq 15, event channel 3
mpt0: Phy 0: Link Rate 3.0 Gbps
scsibus0 at mpt0: 112 targets, 8 luns per target
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci2: interrupting at irq 6, event channel 7
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci3: interrupting at irq 5, event channel 8
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2936 (rev. 0x02)
uhci4: interrupting at irq 6, event channel 7
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at irq 6, event channel 7
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci5 at ppb4 bus 5
vga0 at pci5 dev 3 function 0: vendor 0x102b product 0x0532 (rev. 0x0a)
wsdisplay0 at vga0 kbdmux 1
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2918 (rev. 0x02)
ichlpcib0: 24-bit timer
piixide0 at pci0 dev 31 function 5: Intel 82801I Serial ATA Controller (ICH9)
(rev. 0x02)
piixide0: using irq 14, event channel 4 for native-PCI interrupt
atabus0 at piixide0 channel 0
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
scsibus0: waiting 2 seconds for devices to settle...
pmap_kenter_pa: mapping already present
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
ehci1: handing over full speed device on port 2 to uhci2
ehci_sync_hc: tsleep() = 35
probe(mpt0:0:0:0): command timeout
mpt0: recovered from command timeout
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
probe(mpt0:0:0:0): command timeout
mpt0: recovered from command timeout
sd0 at scsibus0 target 0 lun 0: <ATA, FUJITSU MHZ2250B, 8A22> disk fixed
ehci_sync_hc: tsleep() = 35
sd0(mpt0:0:0:0): command timeout
mpt0: recovered from command timeout
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
sd0(mpt0:0:0:0): command timeout
mpt0: recovered from command timeout
ehci_sync_hc: tsleep() = 35
sd0(mpt0:0:0:0): command timeout
mpt0: recovered from command timeout
sd0: 232 GB, 238476 cyl, 16 head, 127 sec, 512 bytes/sect x 488397168 sectors
ehci_sync_hc: tsleep() = 35
ehci_sync_hc: tsleep() = 35
uhub3: device problem, disabling port 2
ehci_sync_hc: tsleep() = 35
uhub6: device problem, disabling port 3
ehci1: handing over low speed device on port 4 to uhci3
sd0(mpt0:0:0:0): command timeout
mpt0: recovered from command timeout
sd0(mpt0:0:0:0): command timeout
mpt0: recovered from command timeout
sd0(mpt0:0:0:0): command timeout
>How-To-Repeat:
Install Xen3.3 on NetBSD-current amd64 and boot up with the default XEN3_DOM0
kernel.
>Fix:
Home |
Main Index |
Thread Index |
Old Index