Re: kern/43803 (ACPI error messages, wifi card not found)

[hasina rakotoarisoa <hasina.andriantahina%gmail.com@localhost>]

Hi,

I've tried the new current kernel this week-end and I've seen lots of improvement: wifi-card, audio ... (cf. dmesg).
So great job guys !

However,  I still got lots of ACPI Error message on my main console after booting: 

ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node 0xffff800007bf8dc0), AE_NOT_EXIST (20110211/psparse-560)
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_SB_.BAT0._STA] (Node 0xffff800007be9980), AE_NOT_EXIST (20110211/psparse-560)
acpibat0: failed to evaluate _STA

And here is the famous dmesg, I hope will be helpful :

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.52 (GENERIC) #0: Wed Jun 15 07:17:08 EAT 2011
    rakakabe@hpkalasi:/usr/src/builddirs/obj/sys/arch/amd64/compile/GENERIC
total memory = 4022 MB
avail memory = 3884 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Pavilion dv6 Notebook PC (049C210000241310000020000)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz, id 0x20652
cpu1 at mainbus0 apid 1: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz, id 0x20652
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz, id 0x20652
cpu3 at mainbus0 apid 5: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz, id 0x20652
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110211
acpi0: X/RSDT: OemId <HPQOEM,SLIC-MPC,00000001>, AslId <    ,01000013>
ACPI Warning: For \_SB_.PCI0.P0P1._PRT: Return Package has no elements (empty) (20110211/nspredef-500)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20110211/psargs-392)
ACPI Error: Method parse/execution failed [\CPUT] (Node 0xffff800007bf8900), AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\PSSC] (Node 0xffff800007bf88c0), AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._REG] (Node 0xffff800007bf1f80), AE_NOT_FOUND (20110211/psparse-560)
acpiec0: unable to install address space handler: AE_NOT_FOUND
ACPI Error: [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND (20110211/psargs-392)
ACPI Error: Method parse/execution failed [\CPUT] (Node 0xffff800007bf8900), AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\PSSC] (Node 0xffff800007bf88c0), AE_NOT_FOUND (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._REG] (Node 0xffff800007bf1f80), AE_NOT_FOUND (20110211/psparse-560)
ACPI Exception: AE_NOT_FOUND, from region _REG, [EmbeddedControl] (20110211/evregion-618)
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpilid0 at acpi0 (LID0, PNP0C0D): ACPI Lid Switch
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_SB_.BAT0._STA] (Node 0xffff800007be9980), AE_NOT_EXIST (20110211/psparse-560)
acpibat0: failed to evaluate _STA
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_SB_.BAT0._STA] (Node 0xffff800007be9980), AE_NOT_EXIST (20110211/psparse-560)
acpibat0: failed to evaluate _STA
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0118): ACPI Display Output Device
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.P0P3.VGA_.LCD_.GBQC] (Node 0xffff800007bed280), AE_NOT_EXIST (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.P0P3.VGA_.LCD_._BQC] (Node 0xffff800007bed2c0), AE_NOT_EXIST (20110211/psparse-560)
acpiout1: failed to evaluate \_SB_.PCI0.P0P3.VGA_.LCD_._BQC: AE_NOT_EXIST
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.P0P3.VGA_.LCD_.SBCM] (Node 0xffff800007bed240), AE_NOT_EXIST (20110211/psparse-560)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.P0P3.VGA_.LCD_._BCM] (Node 0xffff800007bed300), AE_NOT_EXIST (20110211/psparse-560)
acpiout1: failed to evaluate \_SB_.PCI0.P0P3.VGA_.LCD_._BCM: AE_NOT_EXIST
acpiout2 at acpivga0 (HDMI, 0x0121): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0:   0x0118 (acpiout1): Unknown Output Device, head 0, bios detect
acpivga0:   0x0121 (acpiout2): Unknown Output Device, head 0, bios detect
CIR0 (ENE0100) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
LDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1E10) (aux port): irq 12
PDRC (PNP0C02) at acpi0 not configured
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01.FRSP] (Node 0xffff800007bf8a40), AE_NOT_EXIST (20110211/psparse-560)
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node 0xffff800007bf8dc0), AE_NOT_EXIST (20110211/psparse-560)
acpitz0: levels: hot 110.0 C, passive 100.0 C, passive cooling
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node 0xffff800007bf8dc0), AE_NOT_EXIST (20110211/psparse-560)
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0044 (rev. 0x02)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0045 (rev. 0x02)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: vendor 0x10de product 0x0a2d (rev. 0xa2)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdafg0 at hdaudio0: NVIDIA GT220 HDMI
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz 16/16*
hdafg1 at hdaudio0: NVIDIA GT220 HDMI
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz 16/16*
hdafg2 at hdaudio0: NVIDIA GT220 HDMI
hdafg2: DP00 8ch: Digital Out [Jack]
hdafg2: 8ch/0ch 48000Hz 16/16*
hdafg3 at hdaudio0: NVIDIA GT220 HDMI
hdafg3: DP00 8ch: Digital Out [Jack]
hdafg3: 8ch/0ch 48000Hz 16/16*
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3b3c (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg4 at hdaudio1: Sigmatel 92HD75B3X5
hdafg4: DAC00 2ch: Speaker [Built-In]
hdafg4: ADC01 2ch: Mic In [Jack]
hdafg4: DAC02 2ch: Speaker [Jack]
hdafg4: ADC03 2ch: Mic In [Built-In]
hdafg4: DIG04 2ch: SPDIF Out [Jack]
hdafg4: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz 16/16 20/32 24/32
audio0 at hdafg4: full duplex, playback, capture, independent
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x3b42 (rev. 0x05)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci2 dev 0 function 0: vendor 0x8086 product 0x4239 (rev. 0x35)
iwn0: interrupting at ioapic0 pin 16
iwn0: MIMO 2T2R, MoW, address 00:23:14:26:73:a0
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x3b44 (rev. 0x05)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci3 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x03)
re0: interrupting at ioapic0 pin 17
re0: Ethernet address c8:0a:a9:17:3c:93
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x3b4a (rev. 0x05)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
fwohci0 at pci4 dev 0 function 0: vendor 0x197b product 0x2380 (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 16
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:18:72:c3:01
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: 0x5 loop=100, retry=100
fwohci0: fwphy_rddata: 0x2 loop=100, retry=100
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=100, retry=100
fwohci0: fwphy_rddata: 0x1 loop=100, retry=100
vendor 0x197b product 0x2382 (miscellaneous system) at pci4 dev 0 function 1 not configured
sdhc0 at pci4 dev 0 function 2: vendor 0x197b product 0x2381 (rev. 0x00)
sdhc0: interrupting at ioapic0 pin 16
sdmmc0 at sdhc0
vendor 0x197b product 0x2383 (miscellaneous system) at pci4 dev 0 function 3 not configured
vendor 0x197b product 0x2384 (miscellaneous system) at pci4 dev 0 function 4 not configured
ppb4 at pci0 dev 28 function 7: vendor 0x8086 product 0x3b50 (rev. 0x05)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3b34 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 21
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xa5)
pci6 at ppb5 bus 9
pci6: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3b03 (rev. 0x05)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3b2f
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 0x10300, 6 ports, 32 command slots, features 0xf720e060
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3b30 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
vendor 0x8086 product 0x3b32 (miscellaneous DASP, revision 0x05) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   3 us, pow  1000 mW
acpicpu0: C2: FFH, lat 245 us, pow   350 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 25000 mW, 2267 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 25000 mW, 2266 MHz
acpicpu0: P2: FFH, lat  10 us, pow 23523 mW, 2133 MHz
acpicpu0: P3: FFH, lat  10 us, pow 22095 mW, 1999 MHz
acpicpu0: P4: FFH, lat  10 us, pow 20695 mW, 1866 MHz
acpicpu0: P5: FFH, lat  10 us, pow 19305 mW, 1733 MHz
acpicpu0: P6: FFH, lat  10 us, pow 17961 mW, 1599 MHz
acpicpu0: P7: FFH, lat  10 us, pow 16663 mW, 1466 MHz
acpicpu0: P8: FFH, lat  10 us, pow 15372 mW, 1333 MHz
acpicpu0: P9: FFH, lat  10 us, pow 14120 mW, 1199 MHz
acpicpu0: T0: HLT, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: HLT, lat   1 us, pow     0 mW,  88 %
acpicpu0: T2: HLT, lat   1 us, pow     0 mW,  76 %
acpicpu0: T3: HLT, lat   1 us, pow     0 mW,  64 %
acpicpu0: T4: HLT, lat   1 us, pow     0 mW,  52 %
acpicpu0: T5: HLT, lat   1 us, pow     0 mW,  40 %
acpicpu0: T6: HLT, lat   1 us, pow     0 mW,  28 %
acpicpu0: T7: HLT, lat   1 us, pow     0 mW,  16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
coretemp1 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_SB_.ACAD._PSR] (Node 0xffff800007be9cc0), AE_NOT_EXIST (20110211/psparse-560)
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 1.5Gb/s
ahcisata0 port 4: PHY offline
wd0 at atabus0 drive 0
wd0: <SAMSUNG HM641JI>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 596 GB, 1240341 cyl, 16 head, 63 sec, 512 bytes/sect x 1250263728 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 1 targets
cd0 at atapibus0 drive 0: <hp       CDDVDW TS-L633N, R3186GTZ217017, 0300> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Logitech USB Optical Mouse, rev 2.00/54.00, addr 3, iclass 3/1
ums0 at uhidev0: 8 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uvideo0 at uhub3 port 5 configuration 1 interface 0: SN001 HP Webcam, rev 2.00/1.04, addr 3
video0 at uvideo0: SN001 HP Webcam, rev 2.00/1.04, addr 3
ubt0 at uhub3 port 7
ubt0: Broadcom Corp HP Integrated Module, rev 2.00/3.06, addr 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
/: replaying log to memory
root file system type: ffs
/: replaying log to disk
/var: replaying log to disk
/usr: replaying log to disk
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/home: replaying log to disk
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_TZ_.TZ01._TMP] (Node 0xffff800007bf8dc0), AE_NOT_EXIST (20110211/psparse-560)
ACPI Error: No handler for Region [ERAM] (0xffff800007bd9a00) [EmbeddedControl] (20110211/evregion-417)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110211/exfldio-310)
ACPI Error: Method parse/execution failed [\_SB_.BAT0._STA] (Node 0xffff800007be9980), AE_NOT_EXIST (20110211/psparse-560)
acpibat0: failed to evaluate _STA

2011/6/14 hasina rakotoarisoa <hasina.andriantahina%gmail.com@localhost>

The following reply was made to PR kern/43803; it has been noted by GNATS.

From: hasina rakotoarisoa <hasina.andriantahina%gmail.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc:
Subject: Re: kern/43803 (ACPI error messages, wifi card not found)
Date: Tue, 14 Jun 2011 20:41:17 +0300

 --90e6ba3fd8f70fcce304a5af8b44
 Content-Type: text/plain; charset=ISO-8859-1

 Hi,
 I'm sorry, I can't switch to the current kernel because of a day-to-day
 work. Perhaps I will try later on.
 However, thanks for the changes.


 2011/6/12 <jruoho%netbsd.org@localhost>

 > Synopsis: ACPI error messages, wifi card not found
 >
 > State-Changed-From-To: open->feedback
 > State-Changed-By: jruoho%NetBSD.org@localhost
 > State-Changed-When: Sun, 12 Jun 2011 13:15:03 +0000
 > State-Changed-Why:
 >
 > I have made few relevant changes that supposedly fixed many issues on these
 > HP laptops. Can you try a kernel from -current and see if the error
 > messages
 > are still present?
 >
 >
 >
 >
 >

 --90e6ba3fd8f70fcce304a5af8b44
 Content-Type: text/html; charset=ISO-8859-1
 Content-Transfer-Encoding: quoted-printable

 Hi, <br>I&#39;m sorry, I can&#39;t switch to the current kernel because of =
 a day-to-day work. Perhaps I will try later on.<br>However, thanks for the =
 changes.<br><br><br><div class=3D"gmail_quote">2011/6/12  <span dir=3D"ltr"=
 >&lt;<a href="" href="mailto:jruoho%netbsd.org@localhost">jruoho%netbsd.org@localhost">jruoho%netbsd.org@localhost</a>&gt;</span><=
 br>
 <blockquote class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1p=
 x #ccc solid;padding-left:1ex;">Synopsis: ACPI error messages, wifi card no=
 t found<br>
 <br>
 State-Changed-From-To: open-&gt;feedback<br>
 State-Changed-By: jruoho%NetBSD.org@localhost<br>
 State-Changed-When: Sun, 12 Jun 2011 13:15:03 +0000<br>
 State-Changed-Why:<br>
 <br>
 I have made few relevant changes that supposedly fixed many issues on these=
 <br>
 HP laptops. Can you try a kernel from -current and see if the error message=
 s<br>
 are still present?<br>
 <br>
 <br>
 <br>
 <br>
 </blockquote></div><br>

 --90e6ba3fd8f70fcce304a5af8b44--