port-i386/45847: rnd: detaching source "padlock0".rnd: source "padlock0" failed continuous-output test. error on VT-310DP

To: port-i386-maintainer%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: port-i386/45847: rnd: detaching source "padlock0".rnd: source "padlock0" failed continuous-output test. error on VT-310DP
From: vezhlys%gmail.com@localhost
Date: Mon, 16 Jan 2012 23:05:01 +0000 (UTC)
>Number:         45847
>Category:       port-i386
>Synopsis:       rnd: detaching source "padlock0".rnd: source "padlock0" failed 
>continuous-output test. error on VT-310DP
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Jan 16 23:05:00 +0000 2012
>Originator:     Andrius Varanavicius
>Release:        5.99.60
>Organization:
>Environment:
NetBSD agraphic-vt310dp.VIDANDRIUS 5.99.60 NetBSD 5.99.60 (GENERIC) #0: Sat Jan 
14 00:42:56 UTC 2012  
builds%b7.netbsd.org@localhost:/home/builds/ab/HEAD/i386/201201131840Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
 i386
>Description:
I recompiled kernel with padlock support on VIA VT-310DP motherboard (no other 
changes from GENERIC configuration). However, I'm getting this output 
continuously: 
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.

System boots and is usable but this error continues to appear in several 
seconds interval. 

P.S. I made a change in tsc.c I described on PR41267 to enable second CPU, 
however it doesn't affect this error (it appears with second cpu disabled too). 


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.60 (310DP) #0: Mon Jan 16 01:55:06 EET 2012
        andrius@agraphic-vt310dp.VIDANDRIUS:/usr/src/sys/arch/i386/compile/310DP
total memory = 2013 MB
avail memory = 1966 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
VIA Technologies, Inc. CN400-8237 ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: VIA Nehemiah, id 0x69a
cpu1 at mainbus0 apid 1: VIA Nehemiah, id 0x69a
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <CN400 ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
ALKB: ACPI: Found matching pin for 0.16.INTA at func 0: 10
ALKB: BIOS IRQ 10 does not match initial IRQ 11
ALKB: ACPI: Found matching pin for 0.16.INTB at func 2: 11
ALKB: BIOS IRQ 11 for 0.16.INTB does not match previous BIOS IRQ 10
ALKB: ACPI: Found matching pin for 0.16.INTC at func 4: 5
ALKB: BIOS IRQ 5 for 0.16.INTC does not match previous BIOS IRQ 10
ALKD: ACPI: Found matching pin for 0.18.INTA at func 0: 10
ALKA: ACPI: Found matching pin for 0.15.INTA at func 1: 255
ALKA: ACPI: Found matching pin for 0.15.INTB at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM (PNP0C01) at acpi0 not configured
PMIO (PNP0C02) at acpi0 not configured
SYSR (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
acpitz0 at acpi0 (THRM): cpu0
acpitz0: active cooling level 0: 70.0C
acpitz0: levels: critical 75.0 C, passive 70.0 C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1106 product 0x0259 (rev. 0x00)
agp0 at pchb0: aperture at 0xe8000000, size 0x8000000
pchb1 at pci0 dev 0 function 1: vendor 0x1106 product 0x1259 (rev. 0x00)
pchb2 at pci0 dev 0 function 2: vendor 0x1106 product 0x2259 (rev. 0x00)
pchb3 at pci0 dev 0 function 3: vendor 0x1106 product 0x3259 (rev. 0x00)
pchb4 at pci0 dev 0 function 4: vendor 0x1106 product 0x4259 (rev. 0x00)
pchb5 at pci0 dev 0 function 7: vendor 0x1106 product 0x7259 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3118 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
viadrm0 at vga1: VIA CN400 / PM8X0
viadrm0: AGP at 0xe8000000 128MB
viadrm0: Initialized via 2.11.1 20070202
fxp0 at pci0 dev 9 function 0: i82551 Ethernet, rev 16
fxp0: interrupting at ioapic0 pin 17
fxp0: Ethernet address 00:e0:81:59:68:e5
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vge0 at pci0 dev 10 function 0: VIA VT612X Gigabit Ethernet (rev. 0x11)
vge0: interrupting at ioapic0 pin 18
vge0: Ethernet address: 00:e0:81:59:68:e3
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
pci_mem_find: expected type mem, found i/o
viaide0 at pci0 dev 15 function 0: VIA Technologies VT8237 SATA Controller 
(rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
ALKA: mpacpi_findintr_linkdev: irq mismatch (11 vs 1)
viaide0: using ioapic0 pin 11 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel ignored (disabled)
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 11
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 11
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 11
ehci0: dropped intr workaround enabled
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
viapcib0 at pci0 dev 17 function 0: vendor 0x1106 product 0x3227 (rev. 0x00)
viapcib0: SMBus found at 0x500 (revision 0x0)
iic0 at viapcib0: I2C bus
vr0 at pci0 dev 18 function 0: vendor 0x1106 product 0x3065 (rev. 0x78)
ALKD: mpacpi_findintr_linkdev: irq mismatch (10 vs 1)
vr0: interrupting at ioapic0 pin 10
vr0: Ethernet address: 00:e0:81:59:68:e4
ukphy0 at vr0 phy 1: OUI 0x0002c6, model 0x0032, rev. 10
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at viapcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
padlock0 at cpu0: VIA PadLock
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
padlock0: RNG ACE
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
rnd: source "padlock0" failed continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".ehci0: handing over low speed device on port 1 
to uhci0
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 1: <LITE-ON COMBO LTC-48161H, , KH0R> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 3
wd0 at atabus2 drive 0
wd0: <SAMSUNG SP2001H>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19127 MB, 38862 cyl, 16 head, 63 sec, 512 bytes/sect x 39173743 sectors
rnd: source "padlock0" failed continuous-output test.
rnd: detaching source "padlock0".wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
cd0(viaide1:0:1): using PIO mode 4, Ultra-DMA mode 3 (using DMA)
Kernelized RAIDframe activated
boot device: wd0
root on wd0e dumps on wd0b
root file system type: ffs
rnd: source "padlock0" failed continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".wsdisplay0: screen 1 added (80x25, vt100 
emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
rnd: source "padlock0" failed continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
rnd: detaching source "padlock0".rnd: source "padlock0" failed 
continuous-output test.
>How-To-Repeat:
Recompile kernel with padlock enabled and boot on VIA VT-310DP motherboard.
>Fix:
Prev by Date: Re: bin/45690 ("atf-report -o xml" can generate malformed XML)
Next by Date: port-i386/45848: Lost interrupt error on VT-310DP with SATA devices
Previous by Thread: PR/45690 CVS commit: src/external/bsd/atf/dist
Next by Thread: port-i386/45848: Lost interrupt error on VT-310DP with SATA devices
Indexes:
Home | Main Index | Thread Index | Old Index