NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: kern/45928: Random freeze and interrupt/system storms (netbsd-5/amd64 and -current/amd64)
The following reply was made to PR kern/45928; it has been noted by GNATS.
From: Matthew Mondor <mm_lists%pulsar-zone.net@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc:
Subject: Re: kern/45928: Random freeze and interrupt/system storms
(netbsd-5/amd64 and -current/amd64)
Date: Sun, 5 Feb 2012 02:35:37 -0500
Here is the dmesg (on netbsd-5):
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1_STABLE (GENERIC_MM) #1: Fri Feb 3 06:04:22 EST 2012
root@ninja.xisop:/usr/obj/sys/arch/amd64/compile/GENERIC_MM
total memory = 8103 MB
avail memory = 7840 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.6 @ 0xeb170 (107 entries)
System manufacturer System Product Name (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0/usr/src/sys/arch/x86/x86/mtrr_i686.c: FIXME: more than
8 MTRRs
: Intel 686-class, 3311MHz, id 0x206a7
cpu1 at mainbus0 apid 2: Intel 686-class, 3311MHz, id 0x206a7
cpu2 at mainbus0 apid 4: Intel 686-class, 3311MHz, id 0x206a7
cpu3 at mainbus0 apid 6: Intel 686-class, 3311MHz, id 0x206a7
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId <AMI ,00010013>
ACPI Error (psargs-0464): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception (nsinit-0425): AE_NOT_FOUND, Could not execute arguments for
[RAMW] (Region) [20080321]
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
LPTE (PNP0400) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
spkr0 at pcppi1
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x0100 (rev. 0x09)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0101 (rev. 0x09)
ppb0: unsupported PCI Express version
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0102 (rev. 0x09)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
vendor 0x8086 product 0x1c3a (miscellaneous communications, revision 0x04) at
pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1c2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 23
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 22
azalia0: host: 0x8086/0x1c20 (rev. 5), HDA rev. 1.0
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x1c10 (rev. 0xb5)
ppb1: unsupported PCI Express version
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x1c18 (rev. 0xb5)
ppb2: unsupported PCI Express version
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
pciide0 at pci3 dev 0 function 0
pciide0: vendor 0x1106 product 0x0415 (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 16 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x1c1a (rev. 0xb5)
ppb3: unsupported PCI Express version
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1b21 product 0x1042 (USB serial bus, interface 0x30) at pci4 dev 0
function 0 not configured
ppb4 at pci0 dev 28 function 6: vendor 0x8086 product 0x1c1c (rev. 0xb5)
ppb4: unsupported PCI Express version
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci5 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev.
0x06)
re0: interrupting at ioapic0 pin 18
re0: Ethernet address 54:04:a6:a4:1e:6b
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 4
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb5 at pci0 dev 28 function 7: vendor 0x8086 product 0x244e (rev. 0xb5)
ppb5: unsupported PCI Express version
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1c26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x1c4a (rev. 0x05)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1c02
ahcisata0: interrupting at ioapic0 pin 20
ahcisata0: AHCI revision 0x10300, 6 ports, 32 command slots, features
0xe730e040
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 5
vendor 0x8086 product 0x1c22 (SMBus serial bus, revision 0x05) at pci0 dev 31
function 3 not configured
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3311354560 Hz quality 3000
azalia0: codec[0]: 0x10ec/0x0892 (rev. 3.2), HDA rev. 1.0
azalia0: codec[3]: 0x8086/0x2805 (rev. 0.0), HDA rev. 1.0
audio0 at azalia0: full duplex, playback, capture, independent
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0: <WDC WD3200AAJB-00J3A0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
ahcisata0 port 5: device present, speed: 1.5Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1: <WDC WD3200AAJB-00J3A0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2 at atabus2 drive 0: <ST31000524AS>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
atapibus0 at atabus3: 1 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVDRAM GH22NS90, K5BB9112905, HN00S30>
cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
(using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00,
addr 2
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00,
addr 2
uhub3: single transaction translator
uhub3: 8 ports with 8 removable, self powered
uhidev0 at uhub3 port 5 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd2
root on wd2a dumps on wd2b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
--
Matt
Home |
Main Index |
Thread Index |
Old Index