NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
port-i386/46061: NetBSD 6.0 does not boot: instant reboot
>Number: 46061
>Category: port-i386
>Synopsis: NetBSD 6.0 does not boot: instant reboot
>Confidential: no
>Severity: critical
>Priority: high
>Responsible: port-i386-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Mon Feb 20 18:50:00 +0000 2012
>Originator: Martin S. Weber
>Release: NetBSD 6.0
>Organization:
>Environment:
System: NetBSD agamemnon.entropie.local 5.1_STABLE NetBSD 5.1_STABLE
(AGAMEMNON5) #3: Thu Dec 8 09:45:09 EST 2011
root@agamemnon.entropie.local:/space/obj/sys/arch/i386/compile/AGAMEMNON5 i386
Architecture: i386
Machine: i386
>Description:
In testing the upcoming 6.0 release I realized that NetBSD cannot boot my box
anylonger. Upon
boot prompt, it immediately reboots after a short pause after only displaying
the first line
of the numbers (that it read from disk, I assume). I had NEtBSD 6.0 installed
along with its
modules (a GENERIC kernel), built from source on February 18th. The box in
question is a
Thinkpad T61. I attach the dmesg of the box from 5.1_STABLE:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.1_STABLE (AGAMEMNON5) #3: Thu Dec 8 09:45:09 EST 2011
root@agamemnon.entropie.local:/space/obj/sys/arch/i386/compile/AGAMEMNON5
total memory = 3046 MB
avail memory = 2981 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 7658CTO (ThinkPad T61)
mainbus0 (root)
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005800
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005808
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x00005810
pci_addr_fixup: 000:31:1 0x8086 0x2850 new address 0x0000580c
cpu0 at mainbus0 apid 0: Intel 686-class, 2094MHz, id 0x10676
cpu1 at mainbus0 apid 1: Intel 686-class, 2094MHz, id 0x10676
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <LENOVO,TP-7L ,00002260>, AslId < LTP,00000000>
acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0
hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (FPU, PNP0C04): io 0xf0 irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12
acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0
acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: battery info: SANYO, LION, 42T5262 10603
acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter
thinkpad0 at acpi0 (HKEY, IBM0068)
thinkpad0: using CMOS at \UCMS
thinkpad0: using EC at acpiecdt0
WMI0 (PNP0C14) at acpi0 not configured
acpitz0 at acpi0 (THM0): critical 127.0C, passive cooling
acpitz1 at acpi0 (THM1): critical 100.0C passive 79.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.2
pms0: Passthrough, Palm detect
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2a00 (rev. 0x0c)
agp0 at pchb0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2a02 (rev. 0x0c)
vga1: WARNING: ignoring 64-bit BAR @ 0x10
vga1: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga1: Intel i965GM
i915drm0: AGP at 0xe0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
vendor 0x8086 product 0x2a03 (miscellaneous display, revision 0x0c) at pci0 dev
2 function 1 not configured
vendor 0x8086 product 0x2a04 (miscellaneous communications, revision 0x0c) at
pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2
pciide0: vendor 0x8086 product 0x2a06 (rev. 0x0c)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to native-PCI mode
pciide0: using ioapic0 pin 18 for native-PCI interrupt
atabus0 at pciide0 channel 0
pciide0: secondary channel wired to native-PCI mode
atabus1 at pciide0 channel 1
vendor 0x8086 product 0x2a07 (serial communications, interface 0x02, revision
0x0c) at pci0 dev 3 function 3 not configured
wm0 at pci0 dev 25 function 0: Intel i82801H (M_AMT) LAN Controller, rev. 3
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: FLASH
wm0: Ethernet address 00:21:86:56:09:ee
igphy0 at wm0 phy 1: i82566 10/100/1000 media interface, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x03)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x03)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x03)
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x8086/0x284b (rev. 3), HDA rev. 1.0
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci2 dev 0 function 0
ath0: interrupting at ioapic0 pin 17
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ath0: mac 10.3 phy 6.1 radio 10.2
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x03)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x2845 (rev. 0x03)
ppb3: disabling notification events
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x03)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x03)
uhci2: interrupting at ioapic0 pin 16
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x03)
uhci3: interrupting at ioapic0 pin 17
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x03)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x03)
ehci1: interrupting at ioapic0 pin 19
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xf3)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
cbb0 at pci6 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0xba)
fwohci0 at pci6 dev 0 function 1: vendor 0x1180 product 0x0832 (rev. 0x04)
fwohci0: interrupting at ioapic0 pin 17
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:29:65:04
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x1180 product 0x0822 (SD Host Controller system, revision 0x21) at pci6
dev 0 function 2 not configured
vendor 0x1180 product 0x0843 (miscellaneous system, revision 0x11) at pci6 dev
0 function 3 not configured
vendor 0x1180 product 0x0592 (miscellaneous system, revision 0x11) at pci6 dev
0 function 4 not configured
vendor 0x1180 product 0x0852 (miscellaneous system, revision 0x11) at pci6 dev
0 function 5 not configured
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
cbb0: interrupting at ioapic0 pin 16
cardslot0 at cbb0
cardbus0 at cardslot0: bus 7
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x2811 (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus2 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x2829
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: AHCI revision 1.1, 3 ports, 32 command slots, features 0xe710e080
atabus3 at ahcisata0 channel 0
atabus4 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x03)
ichsmb0: interrupting at ioapic0 pin 23
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1984 (rev. 4.0), HDA rev. 1.0
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0), HDA rev. 0.9
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
audio0 at azalia0: full duplex, playback, capture, independent
atapibus0 at atabus2: 2 targets
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
acpiacad0: AC adapter online.
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-M10N, , 1.02> cdrom
removable
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
wd0 at atabus3 drive 0: <WDC WD5000BEKT-75KA9T0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
(using DMA)
uvideo0 at uhub6 port 5 configuration 1 interface 0: Chicony Electronics Co.,
Ltd. Integrated Camera, rev 2.00/3.20, addr 2
video0 at uvideo0: Chicony Electronics Co., Ltd. Integrated Camera, rev
2.00/3.20, addr 2
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhub7 at uhub1 port 1: Cypress Semiconductor Combi keyboref design V1.68, class
9/0, rev 1.10/0.01, addr 2
uhub7: 3 ports with 2 removable, bus powered
uhidev0 at uhub7 port 2 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 2.00/22.00, addr 3, iclass 3/1
ums0 at uhidev0: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 2 configuration 1 interface 1
uhidev1: Logitech USB Receiver, rev 2.00/22.00, addr 3, iclass 3/0
uhidev1: 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
uhidev2 at uhub7 port 3 configuration 1 interface 0
uhidev2: vendor 0x060b product 0x2001, rev 1.10/0.01, addr 4, iclass 3/1
ukbd0 at uhidev2
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub7 port 3 configuration 1 interface 1
uhidev3: vendor 0x060b product 0x2001, rev 1.10/0.01, addr 4, iclass 3/0
uhidev3: 2 report ids
uhid3 at uhidev3 reportid 1: input=3, output=0, feature=0
uhid4 at uhidev3 reportid 2: input=1, output=0, feature=0
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Build NetBSD 6.0 and try and boot the kernel on a Thinkpad T61
>Fix:
n/a
>Unformatted:
Home |
Main Index |
Thread Index |
Old Index