Re: install/47021: 6.0 RC2 sysinst not find any hard disks on Powermac G3 B&W

[sadirux <sadirux%goja.fr@localhost>]

The following reply was made to PR port-macppc/47021; it has been noted by 
GNATS.

From: sadirux <sadirux%goja.fr@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: 
Subject: Re: install/47021: 6.0 RC2 sysinst  not find any hard disks on
 Powermac G3 B&W
Date: Fri, 03 May 2013 10:06:16 +0200

 Le 2012-10-03 18:20, Michael a écrit :
 > The following reply was made to PR port-macppc/47021; it has been
 > noted by GNATS.
 > 
 > From: Michael <macallan%netbsd.org@localhost>
 > To: gnats-bugs%NetBSD.org@localhost
 > Cc:
 > Subject: Re: install/47021: 6.0 RC2 sysinst  not find any hard disks
 > on Powermac G3 B&W
 > Date: Wed, 3 Oct 2012 12:17:40 -0400
 > 
 > Hello,
 > 
 > On Oct 3, 2012, at 10:10 AM, Izumi Tsutsui wrote:
 > 
 > > The following reply was made to PR port-macppc/47021; it has been
 > > noted by GNATS.
 > >
 > > From: Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>
 > > To: gnats-bugs%NetBSD.org@localhost
 > > Cc: tsutsui%ceres.dti.ne.jp@localhost
 > > Subject: Re: install/47021: 6.0 RC2 sysinst  not find any hard disks
 > > on Powermac
 > >     G3 B&W
 > > Date: Wed, 3 Oct 2012 23:09:17 +0900
 > >
 > > IIRC I heard some OF didn't initialize PCI IDE registers
 > > unless bootstrap loader was loaded from the IDE disk by OF.
 > 
 > I doubt that's the problem - in the first dmesg output there's an
 > error message about the cmdide driver failing to map the chip's
 > registers, I think we're missing a BAT mapping for whatever address
 > range the grackle in this particular B&W G3 uses for its IO space
 > ( apparently it's different from the beige G3 - I fixed a very similar
 > problem there a few months ago ). That's why I asked for the ofctl -p
 > output.
 > 
 > have fun
 > Michael
 
 Hello,
 
 On powermac G3 blue and white, there are two type of ide controler, the 
 first is an ultra-dma 16 used for the cdrom and zip drive. The second 
 controler is an ultra-dma 33 used for internal hard drive.
 
 I will plug the hard drive on the ide controler with the cdrom and 
 install NetBSD 6.1RC4.
 
 it will be easier for you to debug the IDE controller ultra dma 33
 
 best regards,
 Sadirux