Re: kern/48058: bge(4) stops working after booting 5.2_STABLE

To: msaitoh%NetBSD.org@localhost, gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost, he%uninett.no@localhost
Subject: Re: kern/48058: bge(4) stops working after booting 5.2_STABLE
From: Havard Eidnes <he%uninett.no@localhost>
Date: Thu, 18 Jul 2013 13:45:00 +0000 (UTC)
The following reply was made to PR kern/48058; it has been noted by GNATS.

From: Havard Eidnes <he%uninett.no@localhost>
To: msaitoh%NetBSD.org@localhost
Cc: gnats-bugs%netbsd.org@localhost
Subject: Re: kern/48058: bge(4) stops working after booting 5.2_STABLE
Date: Thu, 18 Jul 2013 15:44:24 +0200 (CEST)

 OK,
 
 so a lab machine has been set up, and I have it up & running with
 a -current kernel (6.99.23 dated the 15th of July), after first
 installing a 5.1 kernel and user-land.
 
 The full kernel boot messages from 6.99.23 follow further below.
 
 I also tested with a 6.1 kernel, which also appears to work just
 fine.  The only slight oddity is that the probing for the PHYs
 show
 
 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 
 even though when it's brought up, I get
 
 bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 ...
         media: Ethernet autoselect (1000baseT 
full-duplex,flowcontrol,rxpause,txpause)
 
 All these three kernels seem to work fine.
 So far I've not re-tested with the 5.2 kernel.
 
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.99.23 (MONOLITHIC) #210: Mon Jul 15 20:07:21 CEST 2013
         
he%mt.urc.uninett.no@localhost:/u/build/HEAD/obj/i386/sys/arch/i386/compile/MONOLITHIC
 total memory = 2046 MB
 avail memory = 1998 MB
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf43
 cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf43
 ioapic0 at mainbus0 apid 2
 acpi0 at mainbus0: Intel ACPICA 20110623
 MBRD (PNP0C02) at acpi0 not configured
 npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
 FWH (INT0800) at acpi0 not configured
 COM1 (PNP0501) at acpi0 not configured
 pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
 pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 apm0 at acpi0: Power Management spec V1.2
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0 mux 1
 pms0 at pckbc1 (aux slot)
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 ipmi0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2778 (rev. 0x81)
 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2779 (rev. 0x81)
 ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> x8 @ 2.5Gb/s
 pci1 at ppb0 bus 1
 ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex> x4 @ 2.5Gb/s
 pci2 at ppb1 bus 2
 ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x032c (rev. 0x09)
 ppb2: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
 pci3 at ppb2 bus 3
 vendor 0x8086 product 0x0326 (interrupt system, interface 0x20, revision 0x09) 
at pci2 dev 0 function 1 not configured
 ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
 ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
 pci4 at ppb3 bus 4
 bge0 at pci4 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
 bge0: interrupting at ioapic0 pin 16
 bge0: HW config 000801d1, 00010011, 00000008, 00000000
 bge0: ASIC BCM5750 B1 (0x4101), Ethernet address 00:14:5e:82:10:fe
 brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 ppb4 at pci0 dev 28 function 5: vendor 0x8086 product 0x27e2 (rev. 0x01)
 ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
 pci5 at ppb4 bus 5
 bge1 at pci5 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
 bge1: interrupting at ioapic0 pin 17
 bge1: HW config 000801d1, 00010011, 00000008, 00000000
 bge1: ASIC BCM5750 B1 (0x4101), Ethernet address 00:14:5e:82:10:ff
 brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
 uhci0: interrupting at ioapic0 pin 23
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
 uhci1: interrupting at ioapic0 pin 19
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
 uhci2: interrupting at ioapic0 pin 18
 usb2 at uhci2: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
 ehci0: interrupting at ioapic0 pin 23
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
 usb3 at ehci0: USB revision 2.0
 ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
 pci6 at ppb5 bus 10
 vga1 at pci6 dev 4 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
 wsdisplay0 at vga1 kbdmux 1
 radeondrm0 at vga1: ATI ES1000 RN50
 radeondrm0: Initialized radeon 1.29.0 20080613
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev. 0x01)
 ichlpcib0: 24-bit timer
 gpio0 at ichlpcib0: 64 pins
 piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) 
(rev. 0x01)
 piixide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel ignored (disabled)
 piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid 
Controller (ICH7) (rev. 0x01)
 piixide1: using ioapic0 pin 19 for native-PCI interrupt
 atabus1 at piixide1 channel 0
 atabus2 at piixide1 channel 1
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
 ichsmb0: interrupting at ioapic0 pin 19
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com0: console
 acpicpu0 at cpu0: ACPI CPU
 acpicpu1 at cpu1: ACPI CPU
 atapibus0 at atabus0: 2 targets
 uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 cd0 at atapibus0 drive 0: <HL-DT-ST  GCR-8240N, , 1.06> cdrom removable
 wd0 at atabus1 drive 0
 wd0: <WDC WD2500JS-23MHB0>
 wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 Thu Jul 18 14:50:11 CEST 2013
 
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007, 2008, 2009, 2010, 2011, 2012
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 6.1 (MONOLITHIC)
 total memory = 2046 MB
 avail memory = 1999 MB
 mainbus0 (root)
 cpu0 at mainbus0 apid 0: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf43
 cpu1 at mainbus0 apid 1: Intel(R) Pentium(R) 4 CPU 3.20GHz, id 0xf43
 ioapic0 at mainbus0 apid 2
 acpi0 at mainbus0: Intel ACPICA 20110623
 MBRD (PNP0C02) at acpi0 not configured
 npx1 at acpi0 (MATH, PNP0C04): io 0xf0-0xfe irq 13
 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
 midi0 at pcppi1: PC speaker
 sysbeep0 at pcppi1
 attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
 FWH (INT0800) at acpi0 not configured
 COM1 (PNP0501) at acpi0 not configured
 pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
 pckbc2 at acpi0 (MSE0, PNP0F13) (aux port): irq 12
 acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
 apm0 at acpi0: Power Management spec V1.2
 attimer1: attached to pcppi1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0 mux 1
 pms0 at pckbc1 (aux slot)
 pckbc1: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 ipmi0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1
 pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x2778 (rev. 0x81)
 ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x2779 (rev. 0x81)
 ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci1 at ppb0 bus 1
 ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x27d0 (rev. 0x01)
 ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci2 at ppb1 bus 2
 ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x032c (rev. 0x09)
 ppb2: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
 pci3 at ppb2 bus 3
 vendor 0x8086 product 0x0326 (interrupt system, interface 0x20, revision 0x09) 
at pci2 dev 0 function 1 not configured
 ppb3 at pci0 dev 28 function 4: vendor 0x8086 product 0x27e0 (rev. 0x01)
 ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci4 at ppb3 bus 4
 bge0 at pci4 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
 bge0: interrupting at ioapic0 pin 16
 bge0: ASIC BCM5750 B1 (0x4101), Ethernet address 00:14:5e:82:10:fe
 brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 ppb4 at pci0 dev 28 function 5: vendor 0x8086 product 0x27e2 (rev. 0x01)
 ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex>
 pci5 at ppb4 bus 5
 bge1 at pci5 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
 bge1: interrupting at ioapic0 pin 17
 bge1: ASIC BCM5750 B1 (0x4101), Ethernet address 00:14:5e:82:10:ff
 brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x27c8 (rev. 0x01)
 uhci0: interrupting at ioapic0 pin 23
 usb0 at uhci0: USB revision 1.0
 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x27c9 (rev. 0x01)
 uhci1: interrupting at ioapic0 pin 19
 usb1 at uhci1: USB revision 1.0
 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x27ca (rev. 0x01)
 uhci2: interrupting at ioapic0 pin 18
 usb2 at uhci2: USB revision 1.0
 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x27cc (rev. 0x01)
 ehci0: interrupting at ioapic0 pin 23
 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
 usb3 at ehci0: USB revision 2.0
 ppb5 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xe1)
 pci6 at ppb5 bus 10
 vga1 at pci6 dev 4 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
 wsdisplay0 at vga1 kbdmux 1
 radeondrm0 at vga1: ATI ES1000 RN50
 radeondrm0: Initialized radeon 1.29.0 20080613
 ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x27b8 (rev. 0x01)
 ichlpcib0: 24-bit timer
 gpio0 at ichlpcib0: 64 pins
 piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) 
(rev. 0x01)
 piixide0: primary channel interrupting at ioapic0 pin 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel ignored (disabled)
 piixide1 at pci0 dev 31 function 2: Intel 82801GB/GR Serial ATA/Raid 
Controller (ICH7) (rev. 0x01)
 piixide1: using ioapic0 pin 19 for native-PCI interrupt
 atabus1 at piixide1 channel 0
 atabus2 at piixide1 channel 1
 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x27da (rev. 0x01)
 ichsmb0: interrupting at ioapic0 pin 19
 iic0 at ichsmb0: I2C bus
 isa0 at ichlpcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 com0: console
 acpicpu0 at cpu0: ACPI CPU
 acpicpu1 at cpu1: ACPI CPU
 atapibus0 at atabus0: 2 targets
 uhub0 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub3 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 cd0 at atapibus0 drive 0: <HL-DT-ST  GCR-8240N, , 1.06> cdrom removable
 wd0 at atabus1 drive 0
 wd0: <WDC WD2500JS-23MHB0>
 wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 Thu Jul 18 15:39:01 CEST 2013
Prev by Date: PR/48061 CVS commit: src/etc
Next by Date: PR/48060 CVS commit: src/sys/compat/netbsd32
Previous by Thread: Re: kern/48058: bge(4) stops working after booting 5.2_STABLE
Next by Thread: Re: kern/48058: bge(4) stops working after booting 5.2_STABLE
Indexes:
Home | Main Index | Thread Index | Old Index