NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
misc/48665: Dell R710 sensor_temperature: (ipmi0) critical limit exceeded [Temp6]
>Number: 48665
>Category: misc
>Synopsis: Dell R710 sensor_temperature: (ipmi0) critical limit exceeded
>[Temp6]
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: misc-bug-people
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Tue Mar 18 16:20:00 +0000 2014
>Originator: Fredrik Pettai
>Release: NetBSD 6.1.3
>Organization:
NORDUnet A/S
>Environment:
NetBSD xsrv1 6.1.3 NetBSD 6.1.3 (GENERIC) amd64
(the problem is reproducible on 6_STABLE too)
>Description:
On a Dell R710, newly installed with NetBSD 6.1.3 (and newer, probably older
too) the system will shutdown once it's booted with the message:
Mar 17 14:41:45 xsrv1 root: /etc/powerd/scripts/sensor_temperature: (ipmi0)
critical limit exceeded [Temp6]
Mar 17 14:41:52 xsrv1 syslogd[372]: Exiting on signal 15
[system shutdown]
envstat(8):
xsrv1# envstat
Current CritMax WarnMax WarnMin CritMin Unit
[coretemp0]
cpu0 temperature: 27.000 degC
[coretemp1]
cpu1 temperature: 18.000 degC
[coretemp2]
cpu2 temperature: 22.000 degC
[coretemp3]
cpu3 temperature: 20.000 degC
[coretemp4]
cpu4 temperature: 28.000 degC
[coretemp5]
cpu5 temperature: 21.000 degC
[coretemp6]
cpu6 temperature: 18.000 degC
[coretemp7]
cpu7 temperature: 26.000 degC
[ipmi0]
Temp6: 55.235 47.201 42.180 8.034 3.013 degC
Temp5: 22.094 47.201 42.180 8.034 3.013 degC
Temp4: 20.086 degC
Intrusion: TRUE
Status1: FALSE
Voltage1: 228.976 V
Voltage: 239.019 V
Status: FALSE
FAN 5 RPM: 3600 720 RPM
FAN 4 RPM: 3600 720 RPM
FAN 3 RPM: 3600 720 RPM
FAN 2 RPM: 3600 720 RPM
FAN 1 RPM: 3600 720 RPM
Planar Temp: 32.137 97.415 92.394 8.034 3.013 degC
Ambient Temp: 16.068 47.201 42.180 8.034 3.013 degC
Temp3: 27.116 degC
Temp2: 26.111 degC
Temp1: -74.317 90.385 85.364 degC
Temp: -72.308 90.385 85.364 degC
[mfi0]
mfi0 BBU: TRUE
mfi0:0: online
dmesg.boot:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.1.3 (GENERIC)
total memory = 16371 MB
avail memory = 15881 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Inc. PowerEdge R710
mainbus0 (root)
cpu0 at mainbus0 apid 32: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu1 at mainbus0 apid 0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu2 at mainbus0 apid 34: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu3 at mainbus0 apid 2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu4 at mainbus0 apid 50: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu5 at mainbus0 apid 18: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu6 at mainbus0 apid 52: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu7 at mainbus0 apid 20: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu8 at mainbus0 apid 33: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu9 at mainbus0 apid 1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu10 at mainbus0 apid 35: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu11 at mainbus0 apid 3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu12 at mainbus0 apid 51: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu13 at mainbus0 apid 19: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu14 at mainbus0 apid 53: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
cpu15 at mainbus0 apid 21: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id
0x206c2
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 1: pa 0xfec80000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <DELL ,PE_SC3 ,00000001>, AslId <DELL,00000001>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
WHEA (PNP0C33) at acpi0 not configured
PMI0 (ACPI000D) at acpi0 not configured
SPK (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
MBIO (PNP0C01) at acpi0 not configured
NIPM (IPI0001) at acpi0 not configured
PEHB (PNP0C02) at acpi0 not configured
VTD (PNP0C02) at acpi0 not configured
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3406 (rev. 0x13)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3408 (rev. 0x13)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx0: Ethernet address bc:30:5b:ce:49:24
bnx0: interrupting at ioapic1 pin 4
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx1: Ethernet address bc:30:5b:ce:49:26
bnx1: interrupting at ioapic1 pin 16
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb1 at pci0 dev 3 function 0: vendor 0x8086 product 0x340a (rev. 0x13)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bnx2 at pci2 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx2: Ethernet address bc:30:5b:ce:49:28
bnx2: interrupting at ioapic1 pin 0
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bnx3 at pci2 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx3: Ethernet address bc:30:5b:ce:49:2a
bnx3: interrupting at ioapic1 pin 10
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
ppb2 at pci0 dev 4 function 0: vendor 0x8086 product 0x340b (rev. 0x13)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mfi0 at pci3 dev 0 function 0: Dell PERC H700 Integrated
mfi0: interrupting at ioapic1 pin 1
mfi0: PERC H700 Integrated version 12.10.0-0025
mfi0: logical drives 1, 512MB RAM, BBU type BBU, status good
scsibus0 at mfi0: 64 targets, 8 luns per target
ppb3 at pci0 dev 5 function 0: vendor 0x8086 product 0x340c (rev. 0x13)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 6 function 0: vendor 0x8086 product 0x340d (rev. 0x13)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 7 function 0: vendor 0x8086 product 0x340e (rev. 0x13)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 9 function 0: vendor 0x8086 product 0x3410 (rev. 0x13)
ppb6: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x342e (interrupt system, revision 0x13) at pci0 dev 20
function 0 not configured
vendor 0x8086 product 0x3422 (interrupt system, revision 0x13) at pci0 dev 20
function 1 not configured
vendor 0x8086 product 0x3423 (interrupt system, revision 0x13) at pci0 dev 20
function 2 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2937 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 17
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2938 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 18
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x293c (rev. 0x02)
ehci0: interrupting at ioapic0 pin 19
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2934 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 21
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2935 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x293a (rev. 0x02)
ehci1: interrupting at ioapic0 pin 21
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3
usb5 at ehci1: USB revision 2.0
ppb7 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x92)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled
vga0 at pci8 dev 3 function 0: vendor 0x102b product 0x0532 (rev. 0x0a)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2918 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2: Intel 82801I Serial ATA Controller (ICH9)
(rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7: device 0x0000104a rev 0x4e
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C3: FFH, lat 96 us, pow 350 mW
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
coretemp4 at cpu4: thermal sensor, 1 C resolution
acpicpu5 at cpu5: ACPI CPU
coretemp5 at cpu5: thermal sensor, 1 C resolution
acpicpu6 at cpu6: ACPI CPU
coretemp6 at cpu6: thermal sensor, 1 C resolution
acpicpu7 at cpu7: ACPI CPU
coretemp7 at cpu7: thermal sensor, 1 C resolution
acpicpu8 at cpu8: ACPI CPU
acpicpu9 at cpu9: ACPI CPU
acpicpu10 at cpu10: ACPI CPU
acpicpu11 at cpu11: ACPI CPU
acpicpu12 at cpu12: ACPI CPU
acpicpu13 at cpu13: ACPI CPU
acpicpu14 at cpu14: ACPI CPU
acpicpu15 at cpu15: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
uhub2 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub5: 4 ports with 4 removable, self powered
sd0 at scsibus0 target 0 lun 0: <DELL, PERC H700, 2.10> disk fixed
sd0: fabricating a geometry
sd0: 278 GB, 285568 cyl, 64 head, 32 sec, 512 bytes/sect x 584843264 sectors
sd0: fabricating a geometry
sd0: tagged queueing
uhub6 at uhub1 port 3: vendor 0x0424 product 0x2514, class 9/0, rev 2.00/0.00,
addr 2
uhub6: multiple transaction translators
uhub6: 3 ports with 3 removable, self powered
umass0 at uhub5 port 3 configuration 1 interface 0
umass0: Avocent USB Composite Device-1, rev 2.00/0.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, 1 lun per target
umass1 at uhub5 port 3 configuration 1 interface 1
umass1: Avocent USB Composite Device-1, rev 2.00/0.00, addr 2
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, 2 luns per target
sd1 at scsibus1 target 0 lun 0: <iDRAC, LCDRIVE, 0323> disk removable
sd1: drive offline
sd1: unable to open device, error = 19
cd0 at scsibus2 target 0 lun 0: <iDRAC, Virtual CD, 0323> cdrom removable
sd2 at scsibus2 target 0 lun 1: <iDRAC, Virtual Floppy, 0323> disk removable
sd2: drive offline
sd2: unable to open device, error = 19
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: LITE-ON Technology Dell USB/PS2 Combo Rackmount Keyboard, rev
1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0
uhidev1 at uhub4 port 2 configuration 1 interface 0
uhidev1: Avocent USB Composite Device-0, rev 1.10/0.00, addr 2, iclass 3/1
ukbd1 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 1 configuration 1 interface 1
uhidev2: LITE-ON Technology Dell USB/PS2 Combo Rackmount Keyboard, rev
1.10/1.01, addr 2, iclass 3/1
ums0 at uhidev2: 2 buttons
wsmouse0 at ums0 mux 0
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub4 port 2 configuration 1 interface 1
uhidev3: Avocent USB Composite Device-0, rev 1.10/0.00, addr 2, iclass 3/1
ums1 at uhidev3: 3 buttons and Z dir
wsmouse1 at ums1 mux 0
atapibus0 at atabus0: 2 targets
cd1 at atapibus0 drive 0: <TEAC DVD-ROM DV-28SW, 10102613070947, R.2A> cdrom
removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd1(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
ipmi0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
mfi0: normal state on 'mfi0:0' (online)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
Just install NetBSD and reboot on the hard drive. It will shutdown once it's up.
>Fix:
Home |
Main Index |
Thread Index |
Old Index