NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: bin/48140 (dhcpcd fails to get lease in -cur rent)
On Sun, Oct 19, 2014 at 11:22 AM, roy%marples.name@localhost <roy%marples.name@localhost> wrote:
> Is the dhcpcd version the same in the installer as after install? Can you
> say how the installer one failed?
ok so they arent the same, the installer is
dhcpcd 6.5.1
Copyright (c) 2006-2014 Roy Marples
while installed is
isc-dhcpd-4.3.0
(why?)
During install it is getting an ipv6 address fine (if only
nyftp.org.uk had ipv6 I would never have noticed lack of ipv4), which
alas means the messages scroll a bit fast but seem to be:
(the lack of printf on the installer may not be helping the messages).
xennet0: executing `/libexec/dhcpcd-run-hooks' PREINIT
printf: not found
xennet0: executing `/libexec/dhcpcd-run-hooks' CARRIER
printf: not found
DUID 00:01:00:01:1b:XXXXXXXXXXXXXXXXXXX
xennet0: IAID 31:52:23:e4
xennet0: delaying IPv6 router solictation for 0.4 seconds
xennet0: delaying IPv4 for 0.8 seconds
xennet0: soliciting an IPv6 router
xennet0: sending Router Solicitation
dhcp_openudp: m (Can't assign requested address)
xennet0: Router Advertisement from fe80::c001:88ff:fea9:e1f5
xennet0: adding address 2a01:XXXXXXXXXXXXXXXXXXX/64
xennet0: vltime 86400 seconds, pltime 14400 seconds
xennet0: adding route to 2a01:XXXXXXXX/64
xennet0: adding default route via fe80::c001:88ff:fea9:e1f5
xennet0: executing `/libexec/dhcpcd-run-hooks' ROUTERADVERT
printf: not found
xennet0: No DHCPv6 instruction in RA
xennet0: delaying IPv4 for 1.0 seconds
xennet0: soliciting an IPv6 router
xennet0: sending Router Solicitation
dhcp_openudp: m (Can't assign requested address)
xennet0: Router Advertisement from fe80::c001:88ff:fea9:e1f5
xennet0: adding address 2a01:XXXXXXXXXXXXXXXXXXXXX/64
xennet0: vltime 86400 seconds, pltime 14400 seconds
xennet0: adding route to 2a01:XXXXXXXXXXX:/64
xennet0: adding default route via fe80::c001:88ff:fea9:e1f5
xennet0: waiting for Router Advertisement DAD to complete
xennet0: No DHCPv6 instruction in RA
xennet0: Router Advertisement DAD completed
xennet0: executing `/libexec/dhcpcd-run-hooks' ROUTERADVERT
printf: not found
xennet0: Router Advertisement from fe80::c001:88ff:fea9:e1f5
xennet0: adding address 2a01:XXXXXXXXXXXXXXXXX/64
xennet0: vltime 86400 seconds, pltime 14400 seconds
xennet0: executing `/libexec/dhcpcd-run-hooks' ROUTERADVERT
printf: not found
Home |
Main Index |
Thread Index |
Old Index