Re: kern/49519: bge{0,1} interfaces "confused"; no connectivity

[Masanobu SAITOH <msaitoh%execsw.org@localhost>]

The following reply was made to PR kern/49519; it has been noted by GNATS.

From: Masanobu SAITOH <msaitoh%execsw.org@localhost>
To: gnats-bugs%NetBSD.org@localhost, kern-bug-people%netbsd.org@localhost, 
 gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost, bexley410%aim.com@localhost
Cc: msaitoh%execsw.org@localhost
Subject: Re: kern/49519: bge{0,1} interfaces "confused"; no connectivity
Date: Mon, 05 Jan 2015 10:14:20 +0900

 On 2015/01/02 7:55, Don Y wrote:
 > The following reply was made to PR kern/49519; it has been noted by GNATS.
 > 
 > From: Don Y <Bexley410%aim.com@localhost>
 > To: gnats-bugs%NetBSD.org@localhost, kern-bug-people%netbsd.org@localhost,
 >   gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost
 > Cc:
 > Subject: Re: kern/49519: bge{0,1} interfaces "confused"; no connectivity
 > Date: Thu, 01 Jan 2015 15:50:39 -0700
 > 
 >   Hi Martin,
 >   
 >   On 1/1/2015 3:05 AM, Martin Husemann wrote:
 >   > The following reply was made to PR kern/49519; it has been noted by GNATS.
 >   >
 >   > From: Martin Husemann <martin%duskware.de@localhost>
 >   > To: gnats-bugs%NetBSD.org@localhost
 >   > Cc:
 >   > Subject: Re: kern/49519: bge{0,1} interfaces "confused"; no connectivity
 >   > Date: Thu, 1 Jan 2015 11:03:25 +0100
 >   >
 >   >   It would help if you'd tell us a bit about your machine, a good start
 >   >   would be the lines from /var/run/dmesg.boot that start with bge0: or bge1:.
 >   
 >   Sorry, I've already installed FreeBSD on the box -- I was in a hurry to retire
 >   the machine that this box replaces before year-end.  Now, in a rush to get the
 >   FreeBSD machine into production (I've not used FreeBSD since 2.2.1 so a fair
 >   bit of learning to get under my belt before Monday).
 >   
 >   However, FreeBSD's probe of the pertinent devices yields:
 >   
 >   bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x002002> mem
 >   0xfebd0000-0xfebdffff,0xfebc0000-0xfebcffff irq 21 at device 0.0 on pci2
 >   bge0: CHIP ID 0x00002002; ASIC REV 0x02; CHIP REV 0x20; PCI-X 133 MHz
 >   miibus0: <MII bus> on bge0
 >   brgphy0: <BCM5704 1000BASE-T media interface> PHY 1 on miibus0
 >   brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
 >   1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
 >   bge0: Ethernet address: 00:c0:b6:xx:xx:x2
 >   bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x002002> mem
 >   0xfebf0000-0xfebfffff,0xfebe0000-0xfebeffff irq 22 at device 0.1 on pci2
 >   bge1: CHIP ID 0x00002002; ASIC REV 0x02; CHIP REV 0x20; PCI-X 133 MHz
 >   miibus1: <MII bus> on bge1
 >   brgphy1: <BCM5704 1000BASE-T media interface> PHY 1 on miibus1
 >   brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
 >   1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
 >   bge1: Ethernet address: 00:c0:b6:xx:xx:x3
 >   
 >   >   A good test would also be booting a netbsd-7 beta kernel (leave your installed
 >   >   userland alone, it should just work and is a very quick thing to try).
 >   >   You can get kernels from the daily builds at
 >   >
 >   >   	http://nyftp.netbsd.org/pub/NetBSD-daily/netbsd-7/
 >   
 >   The machine will be tied up for the near future so unlikely I'll get around
 >   to that anytime soon.  After ~20 years with NetBSD, probably time to make a
 >   bit of an investment in FreeBSD...
 >   
 >   Happy Holiday!
 >   
 >   (BTW, this email account will be deleted some time today so probably not
 >   worth replying  :< )
 >   
 >   --don
 
  Perhaps this problem was fixed in netbsd-6 branch (which will be released in
 NetBSD 6.2), netbsd-7 and -current.
 
  Is it OK to close this ticket? Or should we wait until you verify it?
 
 
 -- 
 -----------------------------------------------
                 SAITOH Masanobu (msaitoh%execsw.org@localhost
                                  msaitoh%netbsd.org@localhost)