NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
port-amd64/49564: netbsd7 ACPI broken
>Number: 49564
>Category: port-amd64
>Synopsis: netbsd7 ACPI broken
>Confidential: no
>Severity: critical
>Priority: medium
>Responsible: port-amd64-maintainer
>State: open
>Class: sw-bug
>Submitter-Id: net
>Arrival-Date: Tue Jan 13 16:10:00 +0000 2015
>Originator: ignatios%iai.uni-bonn.de@localhost
>Release: NetBSD 7.0_BETA
>Organization:
>Environment:
System: NetBSD random84.cs.uni-bonn.de 7.0_BETA NetBSD 7.0_BETA (GENERIC) #0: Tue Jan 13 14:56:50 CET 2015 ignatios%random84.cs.uni-bonn.de@localhost:/var/itch/obj/7/Oamd64/sys/arch/amd64/compile/GENERIC amd64
Architecture: x86_64
Machine: amd64
>Description:
Boot todays netbsd7 kernel hangs right after the line
acpi0 at mainbus0 etc. etc.
With userconf, and disabling acpi, the machine boots
this is dmesg in this mode:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0_BETA (GENERIC) #0: Tue Jan 13 14:56:50 CET 2015
ignatios%random84.cs.uni-bonn.de@localhost:/var/itch/obj/7/Oamd64/sys/arch/amd64/compile/GENERIC
total memory = 2046 MB
avail memory = 1971 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
userconf: configure system autoconfiguration:
uc> disable acpi
[466] acpi0 disabled
uc> c
quit
Continuing...
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Sun Microsystems Sun Ultra 20 Workstation (Rev 50)
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0 apid 0: AMD Opteron(tm) Processor 152, id 0x20f71
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 24 pins
ioapic0: conflicting map entries for pin 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x0050 (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0052 (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
ohci0: interrupting at ioapic0 pin 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x005b (rev. 0xa3)
ehci0: interrupting at ioapic0 pin 10
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
auich0 at pci0 dev 4 function 0: nForce4 AC-97 Audio
auich0: interrupting at ioapic0 pin 7
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
viaide0 at pci0 dev 6 function 0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
viaide1: using ioapic0 pin 11 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
viaide2: using ioapic0 pin 10 for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
mach64drm0 at vga0: Rage XL
mach64drm0: Initialized mach64 2.0.0 20060718
fwohci0 at pci1 dev 6 function 0: vendor 0x1106 product 0x3044 (rev. 0x80)
fwohci0: interrupting at ioapic0 pin 11
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:23:e3:3f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
nfe0 at pci0 dev 10 function 0: vendor 0x10de product 0x0057 (rev. 0xa3)
nfe0: interrupting at ioapic0 pin 3
nfe0: Ethernet address 00:e0:81:55:bf:7c
makphy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x2 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 12 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb4: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x16 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer0: attached to pcppi0
powernow0 at cpu0: AMD Cool`n'Quiet
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
audio0 at auich0: full duplex, playback, capture, independent
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM SW-9585, , BZS3> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
viaide1 port 0: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0
wd0: <ST3250823AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhub2 at uhub0 port 2: ATEN International product 0x7000, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: ATEN CS-1734A V3.2.312, rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: ATEN CS-1734A V3.2.312, rev 1.10/1.00, addr 3, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
uftdi0 at uhub0 port 5
uftdi0: FTDI USB Serial Converter, rev 2.00/6.00, addr 4
ucom0 at uftdi0 portno 1
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
This is dmesg of netbsd-6.1:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.1.5_PATCH (GENERIC) #8: Fri Oct 10 16:22:26 CEST 2014
ignatios%random84.cs.uni-bonn.de@localhost:/var/itch/sources/6.1/oamd64/sys/arch/amd64/compile/GENERIC
total memory = 2046 MB
avail memory = 1972 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Sun Microsystems Sun Ultra 20 Workstation (Rev 50)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Opteron(tm) Processor 152, id 0x20f71
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <SUNW ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MBIO (PNP0C02) at acpi0 not configured
SYSR (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
EXPL (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
vendor 0x10de product 0x005e (miscellaneous memory, revision 0xa3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0: vendor 0x10de product 0x0050 (rev. 0xa3)
nfsmbc0 at pci0 dev 1 function 1: vendor 0x10de product 0x0052 (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: vendor 0x10de product 0x005a (rev. 0xa2)
APCF: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 2 function 1: vendor 0x10de product 0x005b (rev. 0xa3)
APCL: Picked IRQ 21 with weight 0
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
auich0 at pci0 dev 4 function 0: nForce4 AC-97 Audio
APCJ: Picked IRQ 22 with weight 0
auich0: interrupting at ioapic0 pin 22
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
viaide0 at pci0 dev 6 function 0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
APSI: Picked IRQ 23 with weight 0
viaide1: using ioapic0 pin 23 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
viaide2: bus-master DMA support present
viaide2: primary channel wired to native-PCI mode
APSJ: Picked IRQ 20 with weight 1
viaide2: using ioapic0 pin 20 for native-PCI interrupt
atabus4 at viaide2 channel 0
viaide2: secondary channel wired to native-PCI mode
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: vendor 0x10de product 0x005c (rev. 0xa2)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x4752 (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
mach64drm0 at vga0: Rage XL
mach64drm0: Initialized mach64 2.0.0 20060718
fwohci0 at pci1 dev 6 function 0: vendor 0x1106 product 0x3044 (rev. 0x80)
APC3: Picked IRQ 18 with weight 0
fwohci0: interrupting at ioapic0 pin 18
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:23:e3:3f
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
nfe0 at pci0 dev 10 function 0: vendor 0x10de product 0x0057 (rev. 0xa3)
APCH: Picked IRQ 21 with weight 1
nfe0: interrupting at ioapic0 pin 21
nfe0: Ethernet address 00:e0:81:55:bf:7c
makphy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 11 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 12 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 13 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 14 function 0: vendor 0x10de product 0x005d (rev. 0xa3)
ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 24 function 0: vendor 0x1022 product 0x1100 (rev. 0x00)
pchb1 at pci0 dev 24 function 1: vendor 0x1022 product 0x1101 (rev. 0x00)
pchb2 at pci0 dev 24 function 2: vendor 0x1022 product 0x1102 (rev. 0x00)
pchb3 at pci0 dev 24 function 3: vendor 0x1022 product 0x1103 (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 100 us, pow 104000 mW, 2600 MHz
acpicpu0: P1: FFH, lat 100 us, pow 101600 mW, 2400 MHz
acpicpu0: P2: FFH, lat 100 us, pow 86300 mW, 2200 MHz
acpicpu0: P3: FFH, lat 100 us, pow 73200 mW, 2000 MHz
acpicpu0: P4: FFH, lat 100 us, pow 62100 mW, 1800 MHz
acpicpu0: P5: FFH, lat 100 us, pow 41900 mW, 1000 MHz
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
audio0 at auich0: full duplex, playback, capture, independent
uhub0 at usb0: vendor 0x10de OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
uhub1 at usb1: vendor 0x10de EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM SW-9585, , BZS3> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
viaide1 port 0: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0
wd0: <ST3250823AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhub2 at uhub0 port 2: ATEN International product 0x7000, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: ATEN CS-1734A V3.2.312, rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: ATEN CS-1734A V3.2.312, rev 1.10/1.00, addr 3, iclass 3/1
ums0 at uhidev1: 5 buttons and Z dir
wsmouse0 at ums0 mux 0
uftdi0 at uhub0 port 5
uftdi0: FTDI USB Serial Converter, rev 2.00/6.00, addr 4
ucom0 at uftdi0 portno 1
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
>How-To-Repeat:
reboot
>Fix:
disable acpi
Home |
Main Index |
Thread Index |
Old Index