port-arm/50029: External SATA HDD of CubieBoard 2 is not detected under NetBSD/evbearmv7hf-el current

[ryoon%NetBSD.org@localhost]

>Number:         50029
>Category:       port-arm
>Synopsis:       External SATA HDD of CubieBoard 2 is not detected under NetBSD/evbearmv7hf-el current
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-arm-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Jul 04 03:15:00 +0000 2015
>Originator:     Ryo ONODERA
>Release:        NetBSD 7.99.19
>Organization:
	
>Environment:
	
	
NetBSD banoffeecake.elements.tetera.org 7.99.19 NetBSD 7.99.19 (CUBIEBOARD) #0: Thu Jul  2 21:11:00 JST 2015  ryo_on%angelcake.elements.tetera.org@localhost:/usr/world/7.99/evbearmv7hf-el/obj/sys/arch/evbarm/compile/CUBIEBOARD evbarm
Architecture: evbearmv7hf-el
Machine: evbearmv7hf-el
>Description:
External SATA 2.5' HDD of CubieBoard 2 is not detected
under NetBSD/evbearmv7hf-el current of yesterday.

ahcisata0 channel 0: clearing WDCTL_RST failed for drive 0
is related?

dmesg is here.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.99.19 (CUBIEBOARD) #0: Thu Jul  2 21:11:00 JST 2015
	ryo_on%angelcake.elements.tetera.org@localhost:/usr/world/7.99/evbearmv7hf-el/obj/sys/arch/evbarm/compile/CUBIEBOARD
total memory = 1024 MB
avail memory = 1005 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 960 MHz Cortex-A7 r0p4 (Cortex V7A core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: revidr: 0
cpu0: mpidr: 0x80000000
cpu0: isar: [0]=0x2101110 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x10011142, [5]=0
cpu0: mmfr: [0]=0x10101105 [1]=0x40000000 [2]=0x1240000 [3]=0x2102211
cpu0: pfr: [0]=0x1131 [1]=0x11011
cpu0: 32KB/32B 2-way L1 VIPT Instruction cache
cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
vfp0: mvfr: [0]=0x10110222 [1]=0x11111111
cpu1 at mainbus0 core 1
armperiph0 at mainbus0
armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (151 valid)
armgic0: 32 Priorities, 128 SPIs, 7 PPIs, 16 SGIs
armgtmr0 at armperiph0: ARMv7 Generic 64-bit Timer (24000 kHz)
armgtmr0: interrupting on irq 27
timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500
awinio0 at mainbus0: A20 (0x1651)
awingpio0 at awinio0: [satapwren >PB8] [usb0drv >PB9] [usb0iddet <PH4] [usb0vbusdet <PH5] [usb1drv >PH6] [usb2drv >PH3] [status-led1 >PH20] [status-led2 >PH21] [mmc0detect <PH1] [audiopactrl >PH15]
awindma0 at awinio0: DMA
awindma0: interrupting on irq 59
awincnt0 at awinio0
timecounter: Timecounter "CNT64" frequency 24000000 Hz quality 200
com0 at awinio0 port 0: ns16550a, working fifo
com0: console
awindebe0 at awinio0 port 0: Display Engine Backend (BE0)
awintcon0 at awinio0 port 0: LCD/TV timing controller (TCON0)
awinhdmi0 at awinio0: HDMI 1.3
awinhdmi0: display connected
awinhdmi0: HDMI mode (auto-detected)
genfb0 at awindebe0: switching to framebuffer console
genfb0: framebuffer at 0xca000000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
awinwdt0 at awinio0: default period is 10 seconds
awinrtc0 at awinio0: RTC
awinusb0 at awinio0 port 0
ohci0 at awinusb0: OHCI USB controller
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci0: interrupting on irq 96
ehci0 at awinusb0: EHCI USB controller
ehci0: EHCI version 1.0
ehci0: companion controller, 1 port each: ohci0
usb1 at ehci0: USB revision 2.0
ehci0: interrupting on irq 71
awinusb1 at awinio0 port 1
ohci1 at awinusb1: OHCI USB controller
ohci1: OHCI version 1.0
usb2 at ohci1: USB revision 1.0
ohci1: interrupting on irq 97
ehci1 at awinusb1: EHCI USB controller
ehci1: EHCI version 1.0
ehci1: companion controller, 1 port each: ohci1
usb3 at ehci1: USB revision 2.0
ehci1: interrupting on irq 72
motg0 at awinio0: OTG
motg0: interrupting at irq 70
motg0: no restrict gpio found
motg0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usb4 at motg0: USB revision 2.0
awinmmc0 at awinio0 port 0: SD3.0 (DMA)
awinmmc0: interrupting at irq 64
ahcisata0 at awinio0: AHCI SATA controller
ahcisata0: interrupting on irq 88
ahcisata0: ignoring broken port multiplier support
ahcisata0: AHCI revision 1.10, 1 port, 32 slots, CAP 0x6724ff80<CCCS,PSC,SSC,PMD,SAM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ>
atabus0 at ahcisata0 channel 0
awiniic0 at awinio0 port 0: Marvell TWSI controller
awiniic0: interrupting on irq 39
iic0 at awiniic0: I2C bus
awge0 at awinio0: Gigabit Ethernet Controller
awge0: interrupting on irq 117
awge0: Ethernet address: 02:0d:0b:82:26:14
rlphy0 at awge0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
awinac0 at awinio0: CODEC
audio0 at awinac0: full duplex, playback, capture, mmap, independent
awinhdmiaudio0 at awinio0: HDMI 1.3
audio1 at awinhdmiaudio0: half duplex, playback, mmap
awinnand0 at awinio0
awinir0 at awinio0 port 0: IR
awinir0: interrupting on irq 37
cir0 at awinir0
gpio0 at awingpio0: 18 pins
gpio1 at awingpio0: 25 pins
gpio2 at awingpio0: 28 pins
gpio3 at awingpio0: 12 pins
gpio4 at awingpio0: 12 pins
gpio5 at awingpio0: 28 pins
gpio6 at awingpio0: 22 pins
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpu1: 960 MHz Cortex-A7 r0p4 (Cortex V7A core)
cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu1: revidr: 0
cpu1: mpidr: 0x80000001
cpu1: isar: [0]=0x2101110 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x10011142, [5]=0
cpu1: mmfr: [0]=0x10101105 [1]=0x40000000 [2]=0x1240000 [3]=0x2102211
cpu1: pfr: [0]=0x1131 [1]=0x11011
cpu1: 32KB/32B 2-way L1 VIPT Instruction cache
cpu1: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
cpu1: 256KB/64B 8-way write-through L2 PIPT Unified cache
vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
vfp1: mvfr: [0]=0x10110222 [1]=0x11111111
sdmmc0 at awinmmc0
uhub0 at usb0: Allwinner OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
uhub2 at usb2: Allwinner OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
uhub3 at usb3: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 1 port with 1 removable, self powered
uhub4 at usb4: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 1 port with 1 removable, self powered
ahcisata0 port 0: device present, speed: 1.5Gb/s
ld0 at sdmmc0: <0x74:0x4a45:USD  :0x02:0x4590ad95:0x0e3>
ld0: 30191 MB, 7667 cyl, 128 head, 63 sec, 512 bytes/sect x 61831168 sectors
ld0: 4-bit width, bus clock 50.000 MHz
ahcisata0 channel 0: clearing WDCTL_RST failed for drive 0
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/evbarm/7.99.19/modules
WARNING: preposterous TOD clock time
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: CHICONY HP Basic USB Keyboard - JP, rev 1.10/3.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0


>How-To-Repeat:
Boot NetBSD/evbearmv7hf-el on CubieBoard 2 with external 2.5' SATA HDD.
	
>Fix:
	
I have no idea.

>Unformatted: